A proposed shaft is to be supported on two bearings spaced 30 inches
apart. A straight spur gear with a pitch diameter7 of 20 inches is to be
supported midway between bearings, and a straight spur pinion having a pitch diameter of 5 inches is to be supported 6 inches to the right of the right-hand bearing. The involute gears are to transmit 150 horsepower at a rotational speed of 150 rpm. The proposed shaft material is hot-rolled 1020 steel with σy = 43.000 psi, Shoulders for gears and bearings are to be a minimum of 0.125 inch (0.25 inch on the diameter). Design the shaft using Energy Distortion theory .
Machinability of Titanium Alloy (Ti-6Al-4V) in Environmentally-Friendly Micro-Drilling Process With Nanofluid Minimum Quantity Lubrication Using Nanodiamond Particles