Professional Documents
Culture Documents
Measuring Guide
Measuring Guide
Bottom Rail
Movable Louvers 21⁄2" min. Fixed Louvers
5" max
Shutter Measuring and Mounting Shutter Design Options
1. Determine mounting applications and prepare 1. A Middle Rail is recommended
windows. Fig 1, 2 and 3. for shutters over 48" in height.
Remove 2 Louvers from the Mid
2. Once window prep has been completed, Rail
shutter and replace with a 4"
determine the number of shutters desired
wide rail with 5/16" rabbets
per window.
on both sides.
3. Measure for panel height. For inside mount panel
2. Consider rabbeted stiles between
height, measure the total window opening and
panels to block light transmission. Add 3/8"
subtract 1/4". For outside window mount,
width to one stile to create the overlap.
measure the total window opening and add the
desired top and bottom overlap.
4. Measure for panel width by dividing the total Stile Stile
window opening by the number of shutter panels
and then subtract the appropriate gaps.
Note: Leave 1/16" gaps where hinges are 2" 2"
mounted and 1/8" gaps between panels.
5. Take these measurements and plug them into
the Shutter Design Wizard at rockler.com to
create your Bill of Materials and Dimensioned
Plans specific to your shutters.
44342
Visit Rockler.com for the most current product
information and videos or call 1-800-260-9663. © Rockler Companies Inc. 2012
21⁄2" Shutter Mounting Considerations
Requirement
Louver
Min. Depth
• Solid wood jamb needed
• Butt hinge application
Fig. 1
Louver
that are not square
• Hang strip may need to be
mounted towards the room
• Wrap around hinge application 11⁄16" Stile Rail
Fig. 2
Outside mount
Min. Depth Window
hang strip Requirement
Louver
Hang
strip
• Recommended for
drywall openings 13⁄16" 11⁄16" Stile Rail
• Mounted flush
with hang strip
• Butt hinge 23⁄16" Louver Min. Depth
11⁄16" Style Requirement
application
Movable 11/16"
Fixed 0"
Fig. 3