Professional Documents
Culture Documents
tΔdmp, tΔd2mp tVdsp, tVd2sp tSi2)3) tSi2)3) tSi2)3) tΔDmp tVDsp tSe2)
> ≤ U L U L
mm μm μm μm μm μm μm μm
– 18 0 –8 6 10 5 3 0 –11 8 Identical to
tSi of shaft
18 30 0 –10 8 10 5 3 0 –13 10
washer of
30 50 0 –12 9 10 6 3 0 –16 12 same bearing
50 80 0 –15 11 10 7 4 0 –19 14
Bearing height
Single direction Single direction Double direction Double direction Spherical roller
bearings without bearings with bearings without bearings with thrust bearings
seat washer seat washer seat washers seat washers
> ≤ U L U L U L U L U L U L
mm μm μm μm μm μm
– 30 +20 –250 +100 –250 +150 –400 +300 –400 – – – –
50 80 +20 –300 +100 –300 +150 –500 +300 –500 0 –125 0 –100
80 120 +25 –300 +150 –300 +200 –500 +400 –500 0 –150 0 –100
120 180 +25 –400 +150 –400 +200 –600 +400 –600 0 –175 0 –125
180 250 +30 –400 +150 –400 +250 –600 +500 –600 0 –200 0 –125
1) For double direction bearings, the values apply only for d2 ≤ 190 mm and D ≤ 360 mm.
2) Applies only to thrust ball bearings and thrust cylindrical roller bearings, each with 90° contact angle.