Professional Documents
Culture Documents
www.global
www.global-tek.in
SPRUE PICKER
Global-tek Sprue picker is specially designed for
rapid and precise takeout of runner from
injection molding machine. All axis operated by
branded pneumatic cylinder having long
service life. Also use vacuum device in case of
take out product. Used up to IMM 250T. Easy
to operate, store multiple programmes,
multiple language, rotational base for easily
mold change, easy to change from product
drop size. Telescopic models are available in
case of roof height not sufficient.
GSP-65
Model available: GSP-550, GSP-650, GSP-750
GSP-550T, GSP-650T, GSP-750T
Structure:Traverseand
Traverseand Vertical Axis can be driven by AC servo motors. Work
with high speed, high efficiency, without vibration and long service life
life.
Crosswise axis operated by branded pneumatic cylinder.
Structure:All 5 Axis can be driven by AC servo motors. Work with high speed, high
efficiency, without vibration and long service life
Structure:GSB
GSB series robot have 2 servo
axis Driven
iven by AC servo motor. Work
with high speed, high efficiency, without
vibration and long service life..
GSE-100
GSESide
Side entry robot specially designed for taking out think wall product from
injection molding machine having very less cycle time. Having Inmold time 0.75
0.75-
0.95 sec. Totale cycle time 3 sec.
Structure:Traverse,
Traverse, Vertical and Stacking Axis can be driven by AC servo motors.
Work with high speed, high efficiency, without vibration and long service life.
life
Reserved pneumatic outputs for vacuum circuit, gripper
g circuit
Top Entry InMold labelling robot
Our GTI Robot designed for labelling
application on product and same time
taking out Product from Injection
molding machine. GTI is Top entry IML
series. Can be use in bucket, Lid,
Container labelling application and
taking out those products and place on
conveyor belt for packing or further
operation GTI-120--180T
Structure:All Three Axis can be driven byAC servo motors. Label stacker mounted
near the machine for placement of label on mandrel to place insite cavity. EOAT
can be designed with or without Vaccum device depend on product specification.
Structure:Four Axis are driven byAC servo motors. Label stacker mounted and
Stacking Unit mounting at both side of Traverse arm for placement of label on
mandrel and place ready parts on coveyor. Label Application done with use of
static charge and products taken out using Vaccum device.
Flat Belt-Conveyor
GFC series flat belt conveyors are designed
for convening products after robot pick them
out from injection molding machine. The
signal connect with robot achieve fully
automatic operation and increase product
efficiency and protect product.
Inclined Belt-Conveyor
GIC series flat belt conveyors are
designed for convening products after
robot pick them out from injection
molding machine.