Professional Documents
Culture Documents
Shell Gadus S4 V45AC Grease is a fluid grease for use in centralised lubrication systems. This grease is based on
highly refined mineral as well as selected synthetic base oils, extreme-pressure and other carefully selected additives to
provide excellent protection in all conditions.
Main Applications
· Pneumatic tools.
Typical Physical Characteristics
Colour Red
Kinematic Viscosity 0
@40 C cSt IP 71 / ASTM D445 40
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Additional Information
· Dispensing
Shell Gadus S4 V45AC Grease is easily dispensed through standard lubrication equipment
· Advice
Advice on applications not covered here may be obtained from your Shell representative.