Professional Documents
Culture Documents
A. TUJUAN PEMBELAJARAN
Pada bab ini akan dijelaskan tentang Data Presentation Systems, Anda harus mampu:
1.1. Menjelaskan Decoder driver to seven segment dan Dot Matrix Display
B. URAIAN MATERI
Tujuan Pembelajaran 4.1:
Menjelaskan Decoder driver to seven segment dan Dot Matrix Display
1
Jenis – jenis Decoder Driver to 7 Seven Segmen:
2
Gambar 4.3. Decoder Driver to Seven Segmen DM 9368
3
TUTORIAL
Information Sheet
DISPLAYS
Many display systems use light indicators to indicate on/off status or give alphanumeric
displays. The term alphanumeric is a contraction of the terms alphabetic and numeric and
describes displays of the letters of the alphabet and numbers 0 to 9 with decimal points. One
form of such a display involves seven ‘light’ segments to generate the alphabetic and numeric
characters. Figure 6.15 shows the segments and Table 6.2 shows how a 4-bit binary code
input can be used to generate inputs to switch on the various segments. Another format
involves a 7 by 5 or 9 by 7 dot matrix (Figure 6.16). The characters are then generated by the
excitation of appropriate dots. The light indicators for such displays might be neon lamps,
incandescent lamps, light-emitting diodes (LEDs) or liquid crystal displays (LCDs). Neon
lamps need high voltages and low currents and can be powered directly from the mains
voltage but can only be used to give a red light. Incandescent lamps can be used with a wide
range of voltages but need a comparatively high current. They emit white light and so use
lenses to generate any required colour. Their main advantage is their brightness
4
Light-emitting diodes
5
6
Liquid crystal displays
Liquid crystal displays do not produce any light of their own but rely on reflected light or
transmitted light. The liquid crystal material is a compound with long rod-shaped molecules
which is sandwiched between two sheets of polymer containing microscopic grooves. The
upper and lower sheets are grooved in directions at 90° to each other. The molecules of the
liquid crystal material align with the grooves in the polymer and adopt a smooth 90° twist
between them (Figure 6.21). When plane polarised light is incident on the liquid crystal
material its plane of polarisation is rotated as it passes through the material. Thus if it is
sandwiched between two sheets of polariser with their transmissiondirections at right angles,
the rotation allows the light to be transmitted and so the material appears light.
7
8
C. SOAL TUGAS /LATIHAN
9
D. DAFTAR PUSTAKA
Frank Ebel, Claus Knoblich, Distribution Station Manual, Festo Didactic GmbH & Co KG,
D-73770 Denkendorf, 2003
Frank Ebel, Distribution Station Assembly, Festo Didactic GmbH & Co, D-73770
Denkendorf, 2002
10