You are on page 1of 2

FOR ENGINES

The world’s only Powered Precleaning System XLR™ = eXtra Low Restriction

Tired of dusting your engines due to


poor filter maintenance practices?
Are on the job air filter changes
contaminating your oil samples?
Sy-Klone® International now offers
the XLR™ Powered Precleaner™ for
maximum precleaning/prefiltering in
impossible environments with the
lowest possible restriction to protect
your engine! For large and small
engine applications!
Contact us today! Use 1 unit for
every 350 CFM
(9.91 m3/min) of
airflow required.
www.sy-klone.com

99.99% Efficient on ISO Fine Test Dust!


High efficiency Debris-laden air is flung
to outside walls in a
powered precleaner vortex pattern
removes more than
90+% of the dust
BEFORE it reaches
the filter.

High efficiency
radial seal prefilter
removes 99.99% of
ISO fine test dust.
Debris-laden air is
ejected through the
Patented Debris Ejection Ports
self-cleaning
prefilter drops dirt
continuously, which After thorough prefiltration,
is then ejected from Air enters prefilter only clean air enters the air
housing, laden with intake housing.
the filter housing.
particulate debris.

SYKLITXLRBROCH 01 • +1-904-448-6563 • www.sy-klone.com • sales@sy-klone.com • © 2016 Sy-Klone International • Page 01


XLR has ZERO Restriction up to 130 CFM RIC0701 Optional Flange Mount
Restriction as a Function of Flow Rate
4-inch Outlet, Rain Cap • 13.5-27 Volts • FEFF116 Standard Length
• The XLR can be
Metric Flow Rate (m3/min) mounted vertically
0 1.4 2.8 4.2 5.7 7.1 8.5 9.9 11.3
18 44.8 or horizontally.
16 39.9

Metric Restriction (mbar)


14 34.9
12 29.9 • Debris Ejection port
Restriction (in-H2O)

10 24.9
can be oriented in
8 19.9
6 15
any direction, as long
4 10 as it is away from the
2 5
operator and painted
0
surfaces.
0
-2 -5
0 50 100 150 200 250 300 350 400
Flow Rate (ft3/min)

XLR System Options


Weight Dimensions Length of Prefilter Prefilter
Part Outlet
Standard Extended Part
Number Width Voltage lbs. kg. Length Width Height
Length Length Numbers
RIC0001 4-inch 12 Volt 23.7 in. 10 in. 11.3in. • FEFF116
12.0 5.4
RIC0002 4-inch 24 Volt 601 mm 254 mm 286 mm • FEFF116
RIC0003 4-inch 12 Volt 28.7 in. 10 in. 11.3in. • FEFF117
14.5 6.6
RIC0004 4-inch 24 Volt 728 mm 254 mm 286 mm • FEFF117
RIC0005 3-inch 12 Volt 23.7 in. 10 in. 11.3in. • FEFF116
11.7 5.3
RIC0006 3-inch 24 Volt 601 mm 254 mm 286 mm • FEFF116
RIC0007 3-inch 12 Volt 28.7 in. 10 in. 11.3in. • FEFF117
14.2 6.4
RIC0008 3-inch 24 Volt 728 mm 254 mm 286 mm • FEFF117
Units include Rain Cap and Base Mount with Clamp Brackets.
Optional Flange Mount Available.
Extended length precleaners require 12.25 inches (311 mm) for prefilter removal.
Standard length precleaners require 6.25 inches (159 mm) for prefilter removal.

The XLR offers two sizes to maximize your precleaning/prefiltering ability.


Standard Length Filter Housing Extended Length Filter Housing
Rain Cap Debris Ejection Ports can
Rain Cap Outlet be oriented in any
Outlet direction. Outlet can be
oriented in 10° increments

Filter Filter
Cap Cap

Inlet Inlet

Debris Ejection Ports Debris Ejection Ports

SYKLITXLR BROCH 01 • +1-904-448-6563 • www.sy-klone.com • sales@sy-klone.com • © 2016 Sy-Klone International • Page 02

You might also like