Professional Documents
Culture Documents
SCHOOL (ECD-10)
Khadga Bhanjyang-05 , Devighat, Nuwakot, Nepal.
BILL NO.1: PRELIMINARIES/TEMPORARY WORKS
1. MOBILIZATION AND DEMOBILIZATION
Mobilization of the construction by constructing
temporaty acomodation for labours and site staff with
required suitable facilities and keeping the same in good
hygenic condition for entire project completion time.
Demolition of the same and cleaning the site after
completion of the construction activities all complete.
[Note: 50% payment shall be made after completion of
mobilization and remaining 50% after completion of
works as per contract] L.S. 1.00 50000 50,000.00
5. FLOORING WORKS
5.1 HARDENED CEMENT CONCETE FLOOR
Providing, laying in required line, level and pattern 40 mm
thick IPS floor finish with cement concrete of mix 1:2:4 (1
cement : 2 sand : 4 crushed stone aggregate 12 mm and
down grade) laid in alternate panel or providing PVC
dividing strips and finished with approved floor hardener
(Dreitop FH of equivalent floor hardener) applied as per
manufacturer's instructions including mixing laying in
required slope, intrigal finishing using appropriate power
trowelling equipment, etc. all complete as per drawing,
specification and instructions of the Engineer. sq.m 2,570.46 1100 2,827,505.96
5.2 NEAT CEMENT SKIRTING
- do - as above, but for 100 mm high skirting. r.m 1,318.07 200 263,613.99
5.3 TERRAZZO CAST-IN SITU DADO
Providing and laying 25 mm thick terrazzo cast-in-situ
dado up to the height shown in drawing with marble chips
rubbed and polished to granolithic finish under layer of 19
mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4
crushed stone aggregate 10 mm and down grade) base
and top layer of 6 mm thick with required color marble
chips of sizes from 1 mm to 4 mm nominal size laid in
cement marble powder mix 3:1 (3 cement : 1 marble
powder mix : 7 marble chips) by volume including cement
slurry, required pigment, grinding, polishing, buffing and
applying sealer coat, etc., all complete as per drawing,
specification and instruction of the Engineer. sq.m 89.93 1000 89,930.00
8. MISCELLANEOUS
8.1 POINTING WOKRS
8.1.1 POINTING WORK IN BRICK MASONRY
Providing and applying at all levels Pointing Works in
Cement Mortar 1:2 (1 cement :2 fine sand) on the face of
brick masonry wall including mixing mortar, laying in
perfect line, level and plumb and finishing in regular and
even surface ,all complete as per drawing , specification
and instruction of the Engineer. sq.m 697.43 300 209,229.00
8.3 RAILING
Providing, fabrication as per design drawings and
installation in position Mild Steel railing in staircase,
verandah and other areas including cutting to required
shape and size, welding joints, installation of base anchor
plates of appropriate size with required numbers of
expansion bolts of required size, providing required size
bends, finishing weld joints to produce smooth surface,
applying one coat of metal primer and two or more coats
of enamel paint of required shade, etc., all complete as
per drawings, specifications and instruction of the
Engineer. Kg 4,821.80 200 964,359.96
4 BOULDER SOLING :
Providing and laying uncoursed hand packed Dry Rubble
Stone soling in foundation, under floor plinth with out any
special dressing of stone including filling interstices with
suitable quarry waste or stone chips or quarry sand,
watering, compacting using appropriate mechanical
compaction means with all contractors materials,
handling, placing etc. all complete as per drawings,
specifications and instruction of the Engineer. The
complete item including all lead & lift. cu.m 49.52 5000 247,600.00
5. P.C.C (1:3:6) WORKS
Providing and laying machine mixed Plain Cement
Concrete of nominal mix 1:3:6 (1 cement : 3 sand : 6
coarse aggregate ) for leveling course in foundations and
under floor of building, etc. in all level with broken stone
aggregate of size not more than 25 mm of approved
quality including formwork wherever necessary,
dewatering, batching, mixing, transporting, placing,
compacting, curing, including all lead and lift, etc. all
complete as per drawings, specifications and the
instructions of the Engineer. cu.m 1.24 15000 18,600.00
6. P.C.C (1:2:4) WORKS
Providing and laying machine mixed Plain Cement
Concrete of nominal mix 1:2:4 (1 cement : 2 sand : 4
coarse aggregate ) for leveling course in foundations and
under floor of building, etc. in all level with broken stone
aggregate of size not more than 25 mm of approved
quality including formwork wherever necessary,
dewatering, batching, mixing, transporting, placing,
compacting, curing, including all lead and lift, etc. all
complete as per drawings, specifications and the
instructions of the Engineer. cu.m 23.06 20000 461,199.99
8. STEEL REINFORCEMENT
Providing and fixing in position Fe 500 steel reinforcement
of various diameter confirming to relevant IS code in
R.C.C. works including straightening, cutting, bending,
binding with 20 SWG annealed wire for tying the
reinforcement bars at each junctions (binding wire shall
not be measured separately) including all waste and cut
pieces, provision for adequate numbers of spacers, chairs,
providing and placing cement mortar (1:1) cover blocks to
keep the bars in intended position at all levels all complete
as per drawings, specifications and instructions of the
Engineer. (Authorized lap length and for the bar length
exceeding 10 meter in length shall be measured for the
payment, except to column). Mt. 0.11 130000 14,300.00
9. FORM WORKS
Supplying and laying centering, shuttering of various
pattern formworks with 19/12 mm thick water proof ply
wood & steel adjustable props for all kinds of RCC works
for foundations, columns, shear walls, beams, slab,
staircase, lintel, sill, pergola, including nails, propping
scaffolding, staging, supporting and bracing in proper
lines and level, sealing the joints with heavy duty brown
self adhesive tape, aligning to line and levels including
Ties, PVC Spacer, Providing openings/ cutouts/ pockets,
applying De-shuttering chemical, De-shuttering as
approved by the Engineer etc., complete at all levels as
per drawing, specifications and instructions of the
Engineer. sq.m 9.12 1000 9,120.00
8. Pull Box
Supply, fabrication and installation of 250x250x100 mm
wallceiling mounted recessed type Pull Box at specified
locations made out of 2 mm thick hot dip galvanised MS
sheets having four corner counter shunk steel screws
opening stainless steel cover. The pull box hsall be suitable
for four sides entry of Telephone cable pipes complete
as per drawing and site conditions. No 3.00 1400 4,200.00
8. Pull Box
Supply, fabrication and installation of 250x250x100 mm
wallceiling mounted recessed type Pull Box at specified
locations made out of 2 mm thick hot dip galvanised MS
sheets having four corner counter shunk steel screws
opening stainless steel cover. The pull box hsall be suitable
for four sides entry of Telephone cable pipes complete
as per drawing and site conditions. No 3.00 1100 3,300.00
F. Fire Extinguisher
Supplying Fire extinguisher ABC stored Pressure 5.0kg size
ABC stored pressure type Fire extinguisher. Nos. 3.00 10000 30,000.00
k) CP Waste Coupling and PVC bottle trap for water trough No. 4.00 1100 4,400.00
l) 40 mm SS Grab bar - Side Set 2.00 7500 15,000.00
m) 40 mm SS Grab bar - Rear Set 2.00 7500 15,000.00
n) CP Foldable Hinge Set 4.00 7500 30,000.00
6.MISCELLANEOUS
6.1 EQUIPMENT CABINET F-09
Size: 1000L x 500W x 2000H
5 shelves, lockable cabinet with all requred hardware
(handle, lock, catch, hinges, etc.). Make: 16 gauge Sheet
metal, powder coated finish all complete. Nos. 3.00 27000 81,000.00