Professional Documents
Culture Documents
pc130 8 en (5c5)
pc130 8 en (5c5)
68 kW 92 HP @ 2200 rpm
OPERATING WEIGHT
12560 kg 27,700 lb
BUCKET CAPACITY
0.18–0.6 m3 0.24–0.78 yd3
PC130-8
PC
130
HYDRAULIC EXCAVATOR
WALK-AROUND
Ecology and Economy Features Large TFT LCD Monitor
• Easy-to-see and use large 7"
● Low Emission Engine
multi-function color monitor
A powerful turbocharged and air-to-air aftercooled Komatsu
SAA4D95LE-5 engine provides 68 kW 92 HP (net). This engine is • Can be displayed in 12
EPA Tier 3 and EU Stage 3A emissions certified, without languages
sacrificing power or machine productivity. TFT : Thin Film Transistor
LCD : Liquid Crystal Display
● Low Operational Noise
The dynamic noise is reduced providing low noise operation.
● Extended Idling Caution and Economy Mode
Minimize fuel consumption
● Eco-gauge
Assists energy saving operation
Productivity Features
● High Mobility
Maximum drawbar pull: 122.6 kN 12500 kgf
27,570 lbs
● Mode Selection
Five working modes designed to match engine
speed, pump delivery, and system pressure.
2
H Y D R AU L I C E X C AVAT O R
PC130-8
NET HORSEPOWER
68 kW 92 HP @ 2200 rpm
OPERATING WEIGHT
Large Comfortable Cab 12560 kg 27,700 lb
• Low-noise cab
BUCKET CAPACITY
• Low vibration with viscous cab damper mounting
0.18 – 0.6 m3
• Highly pressurized cab with air conditioner 0.24 – 0.78 yd3
• Operator seat and console with armrest that enables ergonomic
operational posture
Easy Maintenance
• Long replacement interval of engine oil, engine oil filter, and hydraulic filter
• Remote mounted engine oil filter, engine main fuel filter and fuel drain valve for easy access
• Fuel pre-filter with water separator as standard equipment
• Side-by-side cooling concept enables servicing of individual
cooling modules.
• Equipment Management Monitoring System (EMMS)
3
PC130-8 H Y D R AU L I C E X C AVATO R
Hydraulic system
controller
4
H Y D R AU L I C E X C AVAT O R
PC130-8
Work priority
P P mode
Fuel priority
E E mode
L L mode
Large Drawbar Pull
B B mode
Provides superb steering and slope climbing performance. Work priority
P
ATT P mode
ATT mode
Maximum drawbar pull: 123 kN 12500 kgf 27,570 lb Fuel priority
E E mode
Eco-gauge that Assists Energy-saving Operations
L L mode
Equipped with the Eco-gauge that can be recognized at a
B onB the
glance right of the multi-monitor for environment-friendly
mode
Eco-gauge
energy-saving operations. Allows the operator to maintain work
ATT ATT mode
in the green zone and reduce fuel consumption.
Eco-gauge
Idling Caution
Photo may include optional equipment. To help prevent
unnecessary fuel
consumption, an idling
caution is displayed on the
monitor, if the engine idles
for 5 minutes or more.
5
PC130-8 H Y D R AU L I C E X C AVATO R
WORKING ENVIRONMENT
Rubber
Spring Pressurized Cab
Silicon
Oil
Automatic air conditioner, air filter, and
a higher internal air pressure help
prevent dust from entering the cab.
Lever shown in lock position
6
H Y D R AU L I C E X C AVAT O R
PC130-8
New Cab Design for Hydraulic Slip-Resistant Plates Rear View Monitoring System
Excavators Durable slip resistant plates help The operator can view to the rear of the
The cab is designed specifically for maintain foot traction. machine through the color monitor
hydraulic excavators and gains screen on the multi-function panel.
reinforced strength from the pipe-
structured framework. The cab
framework provides high durability and
impact resistance with very high impact
absorbency.
Skylight
Thermal and Fan Guards Skylight can be opened to improve
overhead visibility.
Thermal and fan guards are placed
around high-temperature parts of the
engine and fan drive.
Travel Alarm
An alarm is installed as standard
equipment to give other workers a
warning when the machine travels in
forward or reverse.
7
PC130-8 H Y D R AU L I C E X C AVATO R
MAINTENANCE FEATURES
Easy Maintenance
Side-by-side Cooling Easy Access to Engine Oil Large Capacity Fuel Tank with
Since radiator, aftercooler and oil Filter, Engine Main Fuel Filter Rustproof Treatment
cooler are arranged side-by-side, it is and Fuel Drain Valve 247 liter 65.3 U.S. gal high-capacity
easy to clean, remove and install them. Engine oil filter, fuel tank. Effective corrosion resistance
Radiator, aftercooler, and oil cooler engine main fuel using rustproof treatment.
made of aluminum have high cooling filter and fuel drain
efficiency and are easily recycled. valve are remote
Sloping Track Frame
mounted to improve Helps prevent dirt and sand from
accessibility. accumulating and allows easy mud
removal.
4 5
Maintenance function
Basic operation
switches Monitor informs replacement time of oil
1 Auto-decelerator
8 2 Working mode selector
and filters on the
3 Traveling selector
4 Buzzer cancel
LCD screen
5 Wiper
6 Windshield washer
when the
replacement
1 2 3
Function interval is
Basic switches
operation
4 5 6
reached.
switches
9
PC130-8 H Y D R AU L I C E X C AVATO R
SPECIFICATIONS
ENGINE DRIVES AND BRAKES
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA4D95LE-5 Steering control . . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Type . . . . . . . . . . . . . . . . . . . . . Water cooled, 4-cycle, direct injection Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Aspiration . . . . . . . . . . . . . . . Turbocharged, and air-to-air aftercooled Maximum drawbar pull . . . . . . . . . . . . . . 123 kN 12500 kgf 27,570 lbf
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35°
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 mm 3.74" Maximum travel speed: High . . . . . . . . . . . . . . . . . . 5.5 km/h 3.4 mph
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 mm 4.53" Low . . . . . . . . . . . . . . . . . . 2.9 km/h 1.8 mph
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.26 ltr 199 in3 Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Horsepower: Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc
Gross (SAE J1995). . . . . . . . . . . . . . . . 72 kW 97 HP @ 2200 rpm
Net (ISO 9249/SAE J1349) . . . . . . . . . 68 kW 92 HP @ 2200 rpm
Governor . . . . . . . . . . . . . . . . . . . . . . . . . All speed control, electronic UNDERCARRIAGE
Lubrication system :
Method . . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force-lubrication Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-leg frame
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Air cleaner . . . . . . . . . . . . . . . . . . . . . . Dry type with double elements Track type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
and auto dust evacuator, plus dust indicator Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Number of shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 each side
EPA Tier 3 and EU Stage 3A emissions certified. Number of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . . 1 each side
Number of track rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 each side
8250 kgf/18,190 lb
Arm crowd force at power max. 64.5 kN
SWING SYSTEM 6580 kgf/14,510 lb
Bucket digging force at power max. 93.4 kN
ISO rating
10
H Y D R AU L I C E X C AVAT O R
PC130-8
DIMENSIONS
WORKING RANGE
1
0 G.L
(m) 9 8 7 6 5 4 3 2 1 0
-1
-2
E D
C -3
-4
-5
-6
2440mm
8'
G
F
11
LIFTING CAPACITY WITH LIFTING MODE
A A: Reach from swing center Cf: Rating over front Bucket: 0.5 m3 0.65 yd3
B: Bucket hook height Cs: Rating over side (SAE heaped)
C: Lifting capacity :Rating at maximum reach
C
Unit: kg/lb
A 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' MAX
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
6.1 m *3050 *3050 *2050 *2050
20' *6,800 *6,800 *4,500 *4,500
4.6 m *3200 *3200 2900 2000 *1900 1750
15' *7,100 *7,100 6,400 4,400 *4,200 3,800
3.0 m *5300 *5300 *4000 3200 2850 1950 *1900 1450
10' *11,700 *11,700 *8,800 7,000 6,300 4,300 *4,200 3,300
1.5 m *7850 5650 4450 3000 2750 1850 *2050 1350
5' *17,400 12,500 9,800 6,600 6,100 4,100 *4,500 3,000
0m *6750 5300 4250 2800 2700 1800 2100 1400
0' *14,900 11,700 9,400 6,200 5,900 4,000 4,600 3,100
–1.5 m 8550 5200 4150 2750 2650 1750 2350 1550
–5' 18,800 11,500 9,200 6,000 5,800 3,900 5,100 3,400
–3.0 m *7800 5300 4200 2750 3000 2000
–10' *17,200 11,700 9,200 6,100 6,600 4,400
–4.6 m *5050 *5050
–15' *11,100 *11,100
Ratings are based on SAE standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
*Load is limited by hydraulic capacity rather than tipping.
STANDARD EQUIPMENT
● Alternator, 35 Ampere, 24 V ● Engine overheat prevention system ● Rear view monitoring system
● AM/FM radio ● Fan guard structure ● Seat belt, retractable 76 mm 3" wide
● Auto-decel ● Fuel system pre-filter with water separator ● Service valve
● Automatic air conditioner with defroster ● High pressure in-line filter ● Slip resistant plates
● Automatic engine warm-up system ● Hydraulic track adjusters (each side) ● Starting motor, 4.5 kW/24 V x 1
● Batteries, 110 Ah/2 x 12 V ● KOMTRAX® ● Suction fan
● Boom holding valve ● Mirrors: Front underview and rearview ● Suspension seat
● Cab (RH, LH, sidewise) ● Track rollers: 7 each side
● Corrosion resistor ● Multi-function color monitor ● Track roller guards (center section)
● Counterweight, 2455 kg 5,412 lb ● Pattern change valve ● Track shoes: 600 mm 24" triple grouser
● Dry type air cleaner, double element ● Power maximizing system ● Travel alarm
● Electric horn ● PPC hydraulic control system ● Working lights, 2 (boom and RH)
● EMMS monitoring system ● Radiator and oil cooler dust proof net ● Working mode selection system
● Engine, Komatsu SAA4D95LE-5 ● Rear reflectors
OPTIONAL EQUIPMENT
AESS781-00 ©2008 Komatsu America Corp. Printed in USA D07(5M)C 7/08 (EV-1)