Professional Documents
Culture Documents
Supplies:
• 2 – 2x4x8 studs
• 1 – 4x4 post @ 25”
• 1 – 2x12 board @ 24 ½”
• 1 – 2x3 stud @ 12”
created by Jaime Costiglio 8/29/18 jaimecostiglio.com
Cut List:
• 2 – 2x4 @ 23 5/8” both ends 5 degree miter parallel (front legs)
• 1 – 2x4 @ 15” both ends 5 degree miter (bottom apron)
• 1 – 2x4 @ 11 7/8” both ends 5 degree miter (top apron)
• 1 – 2x4 @ 21 3/8” one end 5 degree miter (bottom cross support)
• 1 – 2x4 @ 19 3/4” one end 5 degree miter (top cross support)
• 1 – 4x4 @ 23 5/8” both ends 5 degree miter parallel (back leg)
• 1 – 2x12 @ 24 ½” (top)
• 2 – 2x3 @ 5 ½” both ends 45 degree miter (table support)
Step 1: Assemble the front legs. Attach the front aprons to the front legs using countersunk 2 ½” wood
screws.
created by Jaime Costiglio 8/29/18 jaimecostiglio.com
Step 2: Attach the cross supports to the front leg piece using 2 ½” pocket hole screws. Keep the 5 degree
miter cut end towards the back.
created by Jaime Costiglio 8/29/18 jaimecostiglio.com
Step 3: Attach the back leg to the cross supports using 2 ½” pocket hole screws.
created by Jaime Costiglio 8/29/18 jaimecostiglio.com
Step 4: Attach the table top to the legs using 2 ½” countersunk wood screws.
created by Jaime Costiglio 8/29/18 jaimecostiglio.com
Step 5: Attach the table top supports to the underside of the table and back leg using 2 ½” countersunk
wood screws.