Professional Documents
Culture Documents
Pull-Along Design by
Ericson San Diego
Mod Podge is a combination of non-toxic water- How to make successful Laserjet color
base medium and acrylic and is safe for use on prints. Laser prints require no sealer.
children’s toys. Another way to make your project Laserjet prints require no preparation. Laserjet
waterproof is to apply 2 or 3 coats of polyurethane prints can be Mod Podged to the wood toys as
clear finish over a completely dry Mod Podge or soon as the prints are out of the printer.
Carpenter’s White Glue surface.
How do I permanently apply the color
Mod Podge, Fabric Mod Podge and Mod Podge- prints to the wood toy parts?
Outdoors can be safely cleaned with a damp First apply an even coat of Mod Podge to the
cloth. Mod Podge products are not food-safe for- back of the color print and also to the surface of
mulas and should be avoided when making toys the wood toy part. The coverage should allow you
Toy shown with optional
split ball woobly wheels. for teething children. to visibly see an even spread of white Mod Podge
that completely covers the surface. If the Mod
How do I create toys with such beautiful Podge is clear in any area, that area has dried.
Mod Podge is a legendary decoupage medium artwork and colors?
which means it’s an all-in-one glue, sealer and All you need is common Mod Podge and color The wood surface and the color print back sur-
finish used to attach paper and fabric to wood and inkjet or laser computer printouts. face must be wet when you apply the color print.
various other surfaces. It is available at almost Apply Mod Podge to both the wood and paper
any crafts store and on numerous websites. Mod How do I work with Inkjet versus Laserjet prints? surfaces. Each must be an even semi-transparent
Podge is our No Painting Required secret to First, remember this, Laserjet prints do not bleed white color.
quickly crafting high-quality wood toys using our when finishes are applied. Inkjet prints can bleed
original Image Art included in every plan set. under certain conditions but that is easily solved If there are clear spots on a surface it means that
and explained a little later in this article. the Mod Podge has dried out and that the sur-
Can Elmer’s or Carpenter’s White Glue face needs more Mod Podge. Dry clear spots will
be substituted for Mod Podge Mat? What paper should I use? wrinkle when the print is applied.
Yes, and with successful results. Mod Podge Use common uncoated printer paper. Coated
and any Carpenter’s White Glue can be used paper can cause issues with the Mod Podge. Apply one to three seal coats of Mod Podge to
for decoupage projects as a glue and a sealer. Test all coated papers before applying them to a the print and the wood surfaces. When the seal
It is also a durable non-toxic product that is safe finished toy. coat is dry apply one to three finish coats of water
for toys. Both products create a long lasting and resistant polyurethane clear gloss. Let dry.
strong bond with the wood. When using Elmer’s We prefer uncoated 24 lb. bright white laser
or any Carpenter’s White Glue for decoupage, paper. It costs only pennies more. As soon as the toys are dry the toys are
2 ToymakingPlans.com © 2016 ready for active play.
Warning: Read before copying.
The unauthorized reproduction or
PlayTime
distribution of this copyrighted work is
illegal. Criminal copyright infringement Henny Penny Pull-Along
including infringement without
monetary gain, is investigated by the
FBI and is punishable by up to 5 years
in federal prison and a fine of $250,000.
IMPORTANT NOTE: Art images are applied using Mod Podge. After final
assembly polyurethane clear coats are applied then LIGHTLY sanded when
dry with 400 grit sandpaper. Then a finish coat is applied that is not sanded.
Care must be taken to not sand through the clear coats to the paper image.
For detailed instructions on how to use Mod Podge see Page 2.
4 ToymakingPlans.com © 2016
Playtime
Henny Penny Pull-Along
IMPORTANT NOTE: Art images are applied using Mod Podge. After final
assembly polyurethane clear coats are applied then LIGHTLY sanded when
dry with 400 grit sandpaper. Then a finish coat is applied that is not sanded.
Care must be taken to not sand through the clear coats to the paper image.
For detailed instructions on how to use Mod Podge see Page 2.
ToymakingPlans.com © 2016 5
Playtime
Henny Penny Pull-Along
TOP VIEW
ACTUAL SIZE
6 ToymakingPlans.com © 2016
Playtime
Henny Penny Pull-Along
SIDE VIEW
ACTUAL SIZE
Baby Percy
IMPORTANT NOTE: Art images are applied using Mod Podge.
After final assembly polyurethane clear coats are applied then
LIGHTLY sanded when dry with 400 grit sandpaper. Then a finish
coat is applied that is not sanded. Care must be taken to not
sand through the clear coats to the paper image. For detailed
instructions on how to use Mod Podge see Page 2.
TOP VIEW
ACTUAL SIZE
ToymakingPlans.com © 2016 7
Playtime
Henny Penny Pull-Along
TOP VIEW
ACTUAL SIZE
8 ToymakingPlans.com © 2016
Playtime
Henny Penny Pull-Along
SIDE VIEW
ACTUAL SIZE
Baby Potsy
IMPORTANT NOTE: Art images are applied using Mod Podge.
After final assembly polyurethane clear coats are applied then
LIGHTLY sanded when dry with 400 grit sandpaper. Then a finish
coat is applied that is not sanded. Care must be taken to not
sand through the clear coats to the paper image. For detailed
instructions on how to use Mod Podge see Page 2.
TOP VIEW
ACTUAL SIZE
ToymakingPlans.com © 2016 9
Playtime Parts List
Henny Penny Pull-Along
Momma Henny
1a. 3/4” x 3-3/4” x 4-5/8” make 1 Part 4a Wood Toy Wheels
Toy shown with optional 2a. 1/2” Dia x 1/2” make 2 www.craftparts.com
split ball woobly wheels. 3a. 1/4” Dia x 1-7/8” make 2 Part # TW1250 Buy 4
4a. 1-1/4” x 7/16” x 1/4” hole buy 4 1-1/4” x 7/16” x 1/4” Hole
a-cord. 1/8” Dia. x 16” Soft Cord make 1
OPTIONAL WOBBLY WHEELS:
OPTIONAL WOBBLY WHEELS: Part 6a Split Balls
5a. 1/4” Dia x 1-1/2” axle make 2 www.craftparts.com
6a. 1-1/4” x 5/8” Split Ball buy 4 Part # CPB125 Buy 4
1-1/4” Split Ball x 5/8” thick
4b
4a G3
G1
5b
5a Ball
6b
6a
Baby Percy, G4
IMPORTANT NOTE:
Baby Percy
Baby Penny
Baby Potsy
ToymakingPlans.com © 2016 11
Playtime
Henny Penny Pull-Along Ball
Momma Henny
1a 4a
a-cord
Step 1: Step 2 or use Optional Step 3: Optional Step 3 Wooble Wheels: Step 4 (Read First):
Using the Momma Henny Plan Views Using the Momma Henny Plan Views on Using the Momma Henny Plan Views IMPORTANT: Insert and glue 1/8”
on pages 13 as a guide, glue Image pages 13 as a guide, insert two Part 3a on pages 13 as a guide, you can dia. x 16” long pull-along cord thru
Art G1 to both sides of Part 1a. Let axles into Step 1 Assembly then glue four replace the axles Part 3a with optional two Part 2a’s with 1/4” protuding
assembly dry before proceeding. Part 4a wheels onto the ends of the two axles Part 5a. Then glue four Part on each end as shown. The extra
axles in a position that allows the axles 6a Split Ball Wheels to add wobble length of cord stays in the bottom
to turn freely in the Step 1 Assembly. Let movement when playing. of the hole. Glue and press the
assembly dry before proceeding. Part 2a’s tightly into the holes so
the cord cannot pull out.
2a 3a 3a 2a
1a
2a 2a
3a 3a
4a 4a
ToymakingPlans.com © 2016 13
Playtime Momma Henny
1/8” Dia
Henny Penny Pull-Along 0 printer scale 1 2 3 hole thru
ACTUAL SIZE
2a
1a
2a. 1/2” Dia x 1/2” make 2
3a
1a
4a. 1-1/4” x 7/16” x 1/4” hole buy 4
1a. 3/4” x 3-3/4” x 4-5/8” make 1
1/2” Dia 1/2” Dia
hole x hole x OPTIONAL WOBBLY WHEELS ALTERNATIVE
3/4” Deep 5/8” Deep
5/16” Dia For a wobbly wheels effect replace Part 3 axles and Part 4
hole thru wheels with Part 5 axles and Part 6 wheel.
5a
6a 6a
BABY CHICKS
TOP & SIDE PLAN VIEW
4b 4b
ATTENTION:
THIS FULL-SIZE PRECISION
PLAYTIME BABY CHICK PLAN
VIEW IS FOR ASSEMBLY
2b 2b
REFERENCE. INDIVIDUAL
PATTERNS AND ART IMAGES ARE 3b 3b
ON PAGES 16 & 17. 1b Patterns and Image Art are full-size.
We recommend first printing a single black
line pattern page as a test print to insure
your printer is set to print 100%. Check your
4b 4b
printer printed size accuracy by measuring
the printer scale on each pattern with a ruler.
If printed size of pattern is not 100% adjust
printer settings.
1b
2b 2b
3b 3b
4b 4b
ToymakingPlans.com © 2016 15
Playtime Baby Percy, Penny and Potsy
Henny Penny Pull-Along 0 printer scale 1 2 3
ACTUAL SIZE
3b
1b
3b. 1/4” Dia x 1-7/8” make 6
4b
Part 4b Wood Toy Wheels
4b
3/8” Dia Baby Chicks
hole x www.craftparts.com
9/16” Deep Part # TW1005 Buy 12
1” x 1/2” x 1/4” Hole
5b
1/2” Dia hole x
1/2” Deep 5b. 1/4” Dia x 1-3/8” make 6
6b. 1
” Split Ball x 1/2” buy 12
Ball. 1-1/4” Round Wood Ball buy 1
Part 6b Split Balls www.craftparts.com
Baby Chicks - Part # CPB100 Buy 12
1” Split Ball x 1/2” thick
16 ToymakingPlans.com © 2016
Playtime
Henny Penny Pull-Along 0 printer scale 1 2 3
ACTUAL SIZE
FULL-SIZE
ART IMAGES G2
Baby
Percy
G3
Baby
Penny
G1
Momma
Henny
G4
Baby
Potsy
ToymakingPlans.com © 2016