Professional Documents
Culture Documents
Hornet HDX: More Speed. More Parts. More Profit
Hornet HDX: More Speed. More Parts. More Profit
The ultra-fast HORNET HDX sets the standard for acceleration, accuracy,
MORE SPEED. MORE PARTS. and productivity in its class. Its rigid machined dual beam gantry is
engineered to handle the ¼ G acceleration created by its 3,000 IPM (76.2
MORE PROFIT. mpm) rapid traverse speed, and provide the stiffness necessary to handle
the torsion created by the contour bevel system.
FEATURING
• Weld-ready beveled parts • 3000 IPM rapid traverse speed • Complete perimeter safety system
• Produces bevels 360° around parts at • 1/4 G acceleration • Manually switch from Low Speed
up to +/- 52° to High Speed
Nominal Cutting Width (A) 60” (1.52 m) 79.20” (2.01 m) 98.40” (2.50 m) 120” (3.05 m)
Nominal Cutting Length (B) 144” (3.66 m) 240” (6.10 m) 288” (7.31 m)
Width Between Side Frames (C) 78.25” (1.99 m) 96.25” (2.44 m) 116.25” (2.95 m) 138.25” (3.51 m)
Overall Machine Width (D) 122.50” (3.11 m) 140.50” (3.56 m) 160.50” (4.08 m) 182.50” (4.64 m)
Overall Machine Length (E) 222.75” (5.66 m) 342.75” (8.71 m) 364.50” (9.25 m)
Length Between End Frames (F) 203.13” (5.16 m) 323.13” (8.21 m) 333.75” (8.47 m)
E
F
94" B
62"
30" 36"
A
C
79 " (2.01m)
FLEXIBLE CONDUIT
21"
24"