Professional Documents
Culture Documents
80X SERIES
22’1” x 12’8” to 35’0” x 15’0” Material Support Slats 4" x 1/8" Galvanized Steel
Footprint (with controller) (6,731 mm x 3,861 mm to
10,668 mm x 4,572 mm) Maximum Supported 400 lbs/sq ft (1,950 kg/sq
Material Load meter)
9,000 lbs to 13,000 lbs
Weight (tank empty)
(4,082 kg to 5,897 kg) 3-Phase, 380-480 VAC ±10%,
Electrical Requirements
50-60 Hz
Height (with scissor plumbing) 12’0” (3,658 mm)
Below 80 dBA at one meter for
34,000 lbs to 54,000 lbs Noise Level
Operating Weight submerged cutting
(15,422 kg to 24,494 kg)
Speed (80X & 80X-1) 180 in/min (4,572 mm/min)
WORK ENVELOPE Speed (80X-2) 350 in/min (8,890 mm/min)
13’4” x 6’8” to 26’8” x 6’8” Linear Positional Accuracy* ±0.001” (±0.025 mm)
X-Y Cutting Travel* (4,064 mm x 2,032 mm to
8,128 mm x 2,032 mm) Repeatability* ±0.001” (±0.025 mm)
*Optional accessories may reduce cutting travel. Photos may show optional
accessories. For a complete list of accessories, contact an OMAX sales
80X-1 representative. Accuracy specifications are at 72° F (22° C) Pumps are built to
X-Y Cutting Travel: 20’ 0” x 6’ 8” meet UL and CE specifications. Contact OMAX for detailed utility requirements.
(6,096 mm x 2,032 mm)
ABOUT OMAX
To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.
ABRASIVE WATERJET
OMAX CORPORATION
vs. OTHER METHODS 21409 72nd Avenue South
WWW.OMAX.COM/COMPARE Kent, WA 98032
Specifications subject to change without notice. WWW.OMAX.COM TEL 1-253-872-2300 / 1-800-838-0343
600045G © OMAX Corporation September 2016 Made in the USA FAX 1-253-872-6190