Professional Documents
Culture Documents
, Ltd
High-Rigidity with Column-Moving Structure - The moving column structure may eliminate the potential
causes of fatigue and vibration by high-frequent rapid movements. MS-500 ensures over an extended
period of running and optimization with high accuracy.
Master Automatic Co., Ltd
❖ INTRODUCTION
SPINDLE – MS-500 has a standard 10000rpm belt-driven spindle (Option 12000~20000rpm). It offers Radial
and axle with high rigidity performance and high dynamic rotary accuracy.
AUTOMATIC TOOL CHANGE by MACO – MACO's own designed and produced automatic tool changer
features fast, simple, and reliable tool change each time. The aluminum alloy tool pocket is designed with an
TWIN PALLET –
The palletizing system on the machine
reduces unproductive time during
machining. The machining would not
be interrupted, while the other pallet
can be used for preparation.
• The dual table with the standard automatic indexing pallet is of rack & pinion type and rotates
through 180 degrees.
• The table with the horizontal machine bed directly connected that allows stable positioning and
minimal non-cutting time to improve productivity.
• The hydraulic lines for fixtures and electrical cables for rotary tables are within the central column
of the indexing pallet.
Master Automatic Co., Ltd
❖ SPECIFICATION
T-slot 18*3*125
Repeatability mm ± 0.003
Ballscrew & Linear XYZ Ballscrew (XYZ) Φ36 / Φ36 / Φ32 (P16 / C3)
Guide Way XYZ Roller Guide Way (mm) mm 35/35/35 (4)
ADDITIONAL INFORMATION
• Automatic Pallet Changer ((APC) offers fast pallets changing with accurate and stable positioning
and boosts production efficiency.
Master Automatic Co., Ltd
• Expert and precision scraping on binding surface reach the best stability
• Low gravity & strong base guarantees the best rigidity and stability.
Master Automatic Co., Ltd
• Specially designed double back sides chip removing system allows chips to be exhausted out of the
machine in a short time. This will prevent problem caused by deposit of hot chips.