Professional Documents
Culture Documents
User’s Manual
- English -
Table of contents
4 Display & buttons 11 Set backlight & maintenance alert 18 Computer firmware update
6 Set time format & time 12 Select / pair sensor & Exit 20 Import trip logs to app
Let's go ride!
Package contents 2
Head Unit Base Unit Sensor Unit Straps The Continuum Sync comes with one
( For 410000051 / 410000052 ONLY ) head unit and three accessories
1 3 5 6 10 1.Head unit
2.Head unit battery
3.Handlebar/stem mount
4.Mount base pads
5.Speed and cadence sensor
6.Speed sensor battery
4 7 8
7.Cadence sensor magnet
8.Speed sensor magnet
9.Cadence sensor magnet pads
2 9 10.Rubber straps
11.Zip ties
11
X5
Installation instructions 3
Battery Installation Mounting Locations of Components Install the battery in the back of the
head unit. Use a coin to open and
close the cover.
10. Bike Selection Indicates which bike (1or 2) is selected Set/AC S: Press the Set/AC key to enter
S or AC: the setup menu.
↑ = current speed is faster than average
R AC L 11. Pace Arrow
speed.
Press and release
S2: Press for 2
AC: Reset the computer to factory
default settings.
↓ = current speed is slower thanaverage
speed. seconds and release S2: Bike1/Bike2
or or
R2 L2
Display & buttons 5
Reset Trip Logs To reset logs, press R for 3 Reset If the computer does not func-
seconds. tion normally or the screen is
blank after the battery is
L R AC
Set time format / time 6
L R
AC
Set Time Format Set Time Press the S key to enter time format
mode, press the L key to select 12Hr
or 24Hr. Press the R key to confirm
and move to time setup mode.
L R R R
L R
Set backlight / maintenance alert 11
Select sensor
Select / pair sensor 12
L R
Pairing PHONE mode: Enable Bluetooth pairing on your phone.
successful
Enter the verification code shown on the computer to your
P.15 phone in within 1 minute to start pairing. The ride screen
displays if pairing is successful, FAIL displays if pairing was
not successful.
L Pairing failed
*See page 15 for app connection.
R
Sensor mode 13
ANT+ Sensor Mode ANT+ Sensor and Phone Phone Mode In the ride screen, press the L2 key to
Mode switch between phone mode and sensor
mode.
L R R
R
R
L R R R
R R
Operation in phone mode 15
Press L key to select cadence, heart rate or incoming call in phone mode. When bike is not running
Press R key to select RTM, DST, ODO, KCAL, Heart Rrate, Clock, AVE or MAX.
*AVE and MAX will be displayed *Fast pairing:In phone mode, press and hold both
when bike isnot running. L and R keys for 3 seconds to enter the Bluetooth
*Heart rate will be displayed after pairing mode(see page 15.)
a heart rate belt is paired successfully.
L
R
L L L
R
R
R
R
R R R R
Please download and install Giant RideSync App to your smartphone.
App connection Compatible with iPhone 4s/ Compatible with Android 4.3/ 16
iOS 7 or later Bluetooth 4.0 or later
First riding
1 2 3 4 5 6
L2
7 8 9 10 11 12
L+R 2 s
App connection 17
First riding Second riding
13 14 15 1 2
L2
16 17 3
Computer firmware update 18
Manual update
1 2 3
Auto update
1 4 5 6
Computer firmware update 19
Manual update
7 8 9 10
Import the trip logs to app 20
1 2 3 4
5 6 7 8
Troubleshooting 21
Install battery correctly with Gap between the sensor and Adjust the sensor or magnet to
Battery is installed backwards
positive pole facing outward magnet is too large reduce the gap to less than 5 mm
20~199Kg
Current speed 0 ~ 99.9km/mi Riding time 0:00:00 ~ 99:59:59 Weight Low battery alert 2.7V
44~331Lb
Average speed 0 ~ 99.9km/mi Time (12/24) 12:00 / 00:00 Backlight 12:00 / 00:00 Battery life 1h/day 8 months
Operating -10 ~ + 50 ℃
Maximum speed 0 ~ 99.9km/mi Calories burnt 0~9999Kcal Units Km / mi, Kg / Lb
temperature -14 ~ 122 ℉
Storage -20 ~ + 60 ℃
Distance 0 ~ 999.9km/mi Total calories burnt 0~99999Kcal Auto hibernation 25 minutes
temperature -4 ~ 140 ℉
300-700 km,
Odometer 0 ~ 99999km/mi Calories 9999kcal Maintenance alert Display system 7 segments
180-430 mi
Riding time 0:00:00 ~ 9:59:59 Cadence 30~240rpm Battery type CR2032 Language English