Professional Documents
Culture Documents
3-Way Servo Solenoid Valves, Cartridge Type, Pilot Operated, With Inductive Position Transducer
3-Way Servo Solenoid Valves, Cartridge Type, Pilot Operated, With Inductive Position Transducer
05 1/20
3-way servo solenoid valves,
cartridge type, pilot operated,
with inductive position transducer
Ordering data
3WRCB H V M 1X Z M
M= NBR seals,
3/2-way cartridge suitable for mineral oils
servo solenoid valve (HL, HLP) to DIN 51524
Preferred types
Note
You can find an overview of and further information
on the pilot valves and accessories on pages 5 and 6.
RE 29217/12.05 3WRCB 25...50 Hydraulics Bosch Rexroth AG 3/20
Pilot valve
Pilot valve
A 씯씮 X A 씯씮 X / B 씯씮 Z
4WRPEH6...
4WRPH6...
RE 29217/12.05 3WRCB 25...50 Hydraulics Bosch Rexroth AG 5/20
Overview
3WRCB25...50 with on-board electronics (OBE)
Accessories
Type Material Number
Plug-in connector 4P for 3WRCB25...50 Included in scope
PG7 of delivery
Cheese-head bolts for 3WRCB25...50
(4x) f ISO 4762
(4x) f ISO 4762 Cheese-head bolts M5x30 for 4WRPEH6... 2 910 151 166
Overview
3WRCB25...50 with external electronics
Accessories
Type Material Number
Plug-in connector 4P for 3WRCB25...50 Included in scope
PG7 of delivery
Cheese-head bolts for 3WRCB25...50
(4x) f ISO 4762
M16x1,5 PG7
(4x) f ISO 4762 Cheese-head bolts M5x30 for 4WRPH6... 2 910 151 166
Technical data
General
Construction 3/2-way cartridge servo solenoid valve, pilot operated main stage
Actuation Servo solenoid valve NG6, on the block as a separate pilot valve
Type of mounting Cartridge type, see installation dimensions
Installation position Horizontal, or position transducer facing downwards
Ambient temperature range °C –20...+50
Vibration resistance, test condition Max. 25 g, shaken in 3 dimensions (24 h)
1) The purity classes stated for the components must be complied with in hydraulic systems.
Effective filtration prevents problems and also extends the service life of components.
For a selection of filters, see catalog sheets RE 50070, RE 50076 and RE 50081.
2) Flow at a different ∆p
Qx = Qnom · 冪莦
∆p
5
x
Important
Information on Qnom/Qmax only applies if installation dimensions are complied with.
8/20 Bosch Rexroth AG Hydraulics 3WRCB 25...50 RE 29217/12.05
Technical data
Static/Dynamic
Hysteresis % ⬍ 0.1, scarcely measurable
Manufacturing tolerance % ⱕ 10
NG25 NG32 NG50
Response time for signal ms 33 28 60
change 0...100 %
(pX = 100 bar/pA = 50 bar) A–X
Response time for signal ms 27 – 50
change 0...100 %
(pX = 100 bar/pA = 50 bar) A–X/B–Z
Switch-off behavior After electrical switch-off: pilot valve in “fail-safe”,
main stage moves to “A–T” symbol position
Thermal drift Zero drift < 1 % at ∆T = 40 °C
Zero calibration Adjustable by ±5 % on valve amplifier, pilot valve with OBE factory-set
Electrical
Position transducer Supply: +15 V/35 mA Signal: 0...±10 V (RL ⭌ 10 kΩ)
DC/DC technology Supply: –15 V/25 mA
All above characteristics valid only in connection with valve 4WRPEH6..., see page 5.
Connection
For electrical data, see page 7 and
Operating Instructions 1 819 929 083
Supply zero
Ref. zero *
RE 29217/12.05
Setpoint 0...±10 V
Version A1: UD–E 0...±10 V
Shield
On-board trigger electronics
Pilot line A – X
9/20
Supply UB
10/20
Supply zero
씯 Loop IF–C
씯
ID–E 4...20 mA
씮
Version F1: ID–E 4...20 mA
Shield
On-board trigger electronics
Hydraulics
Pilot line A – X
RE 29217/12.05
RE 29217/12.05 3WRCB 25...50 Hydraulics Bosch Rexroth AG 11/20
Q [%] P–A
100
80
60
40
20
–UE [V] –10 –8 –6 –4 –2
2 4 6 8 10 +UE [V]
–20
–40
–60
–80
–100
Q [%] A–T
Pressure gain
14/20 Bosch Rexroth AG Hydraulics 3WRCB 25...50 RE 29217/12.05
Bode diagram
NG25 NG32
NG50
RE 29217/12.05 3WRCB 25...50 Hydraulics Bosch Rexroth AG 15/20
Set of seals
Set of seals
w Set 1 817 010 326
Set of seals
w Set 1 817 010 277
Set of seals
w Set 1 817 010 322
A 씯씮 X / B 씯씮 Z
RE 29217/12.05 3WRCB 25...50 Hydraulics Bosch Rexroth AG 19/20
A 씯씮 X
20/20 Bosch Rexroth AG Hydraulics 3WRCB 25...50 RE 29217/12.05
A 씯씮 X / B 씯씮 Z
Bosch Rexroth AG © This document, as well as the data, specifications and other information
Hydraulics set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Telefon +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain application
Telefax +49 (0) 93 52 / 18-23 58 can be derived from our information. The information given does not release
documentation@boschrexroth.de the user from the obligation of own judgement and verification. It must be
www.boschrexroth.de remembered that our products are subject to a natural process of wear and
aging.