Professional Documents
Culture Documents
512VP - R1 CER Manual Motores Verticales
512VP - R1 CER Manual Motores Verticales
1
CERTIFICADO
TO: Flowserve
PO Box 668
Hastings, NE, 68901
ATTN: ROD KITTEN
TO: Flowserve
PO Box 668
Hastings, NE, 68901
ATTN: ROD KITTEN
USE THE DATA PROVIDED BELOW TO SELECT THE APPROPRIATE DIMENSION PRINT
Horsepower 800
Pole(s) 04
Voltage(s) 690
Frame Size 5012VP
Shaft U Diameter 3.125
Outlet Box AF 10.94
Outlet Box AA 3.5
Accessory Outlet Box DM 1
MPI: 130968
HP: 800
POLES: 4
VOLTS: 690
HZ: 50
SERVICE FACTOR: 1.15
EFFICIENCY (%):
S.F. 93.9
FULL 94.5
3/4 95.4
1/2 95.6
1/4 94
POWER FACTOR (%):
S.F. 90.9
FULL 90.9
3/4 89.8
1/2 85.6
1/4 69.9
NO LOAD 4.7
LOCKED ROTOR 22.9
AMPS:
S.F. 673
FULL 582
3/4 437
1/2 305
1/4 190
NO LOAD 130.1
LOCKED ROTOR 3880
NEMA CODE LETTER G
NEMA DESIGN LETTER #
FULL LOAD RPM 1470
NEMA NOMINAL EFFICIENCY (%) 94.5
GUARANTEED EFFICIENCY (%) 93.6
MAX KVAR 132.2
AMBIENT (°C) 40
ALTITUDE (FASL) 3300
SAFE STALL TIME-HOT (SEC) 14
SOUND PRESSURE (DBA @ 1M) 82
TORQUES:
BREAKDOWN{% F.L.} 175
LOCKED ROTOR{% F.L.} 80
FULL LOAD{LB-FT} 2855.9
The Above Data Is Typical, Sinewave Power Unless Noted Otherwise
499495
T1
T1
or
T3 DELTA T2 T3 T2
WYE
Connection Connection
LEAD CONNECTION
1 2 3
Line
Each lead may consist of one or more cables having the
same lead number.
499495
Nota:
Se puede conectar de cualquiera de las dos formas
la placa de US Motors dice claro "Conexión Estrella o Conexión Delta"
la conexión siempre será "Lead Connection 1 - 2 - 3"
To reverse direction of rotation interchange connections L1 and L2.
EFFECTIVE: 2/27/96
SUPERCEDES: X736618, 96441, 179879, 284138
Connection Plate: 499495
Connection Decal: 912113
PLANO 512VP Rev.1
PLANO 512VP Rev.1
970798
SPACE HEATER
CONNECTION DIAGRAM
SPACE HEATER LEADS MAY BE LOCATED IN EITHER THE MAIN OUTLET BOX
OR IF SO EQUIPPED, AN AUXILIARY BOX
ITEM ITEM
NO. QTY NAME OF PART NO. QTY NAME OF PART
1 1 Lower Bracket 30 1 Oil Fill Plug (Expanding)
2 1 Shaft Water Slinger Bearing Spacer (or Tandem Thrust
31 1
Pipe Nipple (Lower Grease Bearing)
3 1
Drain) 32 1 Upper Thrust Bearing
4 1 Pipe Cap (Lower Grease Drain) 33 1 Bearing Mounting
5 1 Grease Zerk Fitting Dust Cover (Only on Units Without
34 1
Pipe Coupling (Lower Grease Ratchet)
6 1
Fill) Locknut and Lockwasher (Brg Mtg to
35 1
7 1 Pipe Nipple (Lower Grease Fill) Shaft)
Locknut and Lockwasher 36 1 Canopy Cap
8 1
(Lower Bearing) Thrust Coupling (Only on
37 1
9 1 Lower Bearing Hollowshaft)
10 1 Lower Bearing Cap 38 1 Gib Key (Only on Hollowshaft)
Lower Intake Screen (Only on 39 2 WP2 Intake Box (Only on WP-2)
11 1
WP-1) Upper Adapter Flange (Only on WP-
40 2
12 1 Lower Air Deflector 2)
13 1 Rotor Assembly Lower Adapter Flange (Only on WP-
41 2
2)
14 1 Rotor Core
42 4 Filter Access Cover (Only on WP-2)
15 1 Rotor Shaft
43 4 Intake Screen (Only on WP-2)
Square Key (Bearing Mounting
16 1 Cover (Flange Access) (Only on WP-
to Shaft) 44 4
2)
17 1 Stator Assembly
Ratchet Adaptor (Only on Units With
Lower Air Intake Cover (Only on 45 1
18 2 Ratchet)
WP-1)
Connection Spring (Only on Units
Upper Air Intake Screen (Only 46 1
19 2 With Ratchet)
on WP-1)
Stationary Ratchet (Only on Units
Gasket (Outlet Box Base to 47 1
20 1 With Ratchet)
Stator)
Pressure Plate (Only on Units With
21 1 Outlet Box Base 48 1
Ratchet)
Gasket (Outlet Box Cover to
22 1 Rotating Ratchet (Only on Units With
Base) 49 1
Ratchet)
23 1 Outlet Box Cover
12-
2- (5008) Ratchet Ball (Only on Units with
(5008) 50
24 Exhaust Screen 14- Ratchet)
4- (5012)
(5012)
Ball Retaining Ring (Only on Units
25 1 Upper Air Deflector 51 1
With Ratchet)
26 1 Upper Bracket 4-
27 1 Pipe Nipple (Oil Drain) (5008) Plain Washer (Only on Units With
52
52
28 1 Pipe Cap (Oil Drain) 12- Ratchet)
(5012)
29 1 Oil Sight Gauge Window
4-
(5008) Die Spring (Only on Units With
53
6- Ratchet)
(5012)
4-
(5008)
54 Screw (Only on Units With Ratchet)
6-
(5012)
55 1 Pressurization Baffle
WARNING: BEARINGS: PRICES:
Any disassembly or repair work on Refer to motor Parts stocking
explosionproof motors will void the nameplate for the distributors: refer to
Underwriters Laboratories, Inc. label bearing numbers. USEM renewal parts
unless done by the manufacturer, or a numerical index. All
facility approved by the Underwriters Others: refer to your
Laboratories, Inc. Refer to your nearest USEM parts
nearest U.S. Elecrical Motors office distributor.
for assistance.
reference: Renewal Parts Section 700 - 200
Copyright © 2002 U.S. Electrical Motors, All rights reserved
PLANO 512VP Rev.1
DATE: 6/8/2010
Home Email
Copyright © 2000 U.S. Electrical M otors, All rights reserved
PLANO 512VP Rev.1
8/15/05 80-224