Professional Documents
Culture Documents
3800-2
26”Flexible Handle
38015SD
3800-8 Universal Joint 5-5/8”(143mm) 15 Pcs 1” Dr. Socket Wrench Set SAE
1pc 6-1/2” Rarchet Head 24 Teeth
1pc 3-1/8” Sliding Head
1pc 22” Universal Handle
2pcs Extension Bar: 8”,16”
1pc Metal Box 26”x8-1/4”x4-1/4”
10pcs SAE Sockets: 1-7/16,1-1/2,1-11/16,1-7/8,2,2-1/4
2-3/8,2-5/8,2-15/16,3-1/8”
Packing 1set/ctn, 27.6/29kgs/0.9’
36021
36021D 3800 1" Dr. Hand Socket Metric
Item No. Size (mm)
21 Pcs 3/4” Dr. Socket Wrench Set Metric
6pt 12pt
1pc 500mm Reversible Ratchet Handle 3836 3836D 36
1pc 450mm Sliding T-Bar 3838 3838D 38
2pcs Extension Bar: 100,200mm 3841 3841D 41
3846 3846D 36
1pc Blow Mold Case 530x360x92mm
3850 3850D 50
16pcs Metric Sockets:19,21,22,23,24,26,27,29,30
3854 3854D 54
32,33,36,42,46,50,55mm 3855 3855D 55
Packing 1set/ctn, 13/13.5kgs/0.9’ 3858 3858D 58
3860 3860D 60
3863 3863D 63
3865 3865D 65
3867 3867D 67
3870 3870D 70
3871 3871D 71 38022D
3875 3875D 75
3877 3877D 77 22 Pcs 1” Dr. Socket Wrench Set Metric
3880 3880D 80
1pc 165mm Rarchet Head 24 Teeth
3800SD 1" Dr. Hand Socket SAE 1pc 79mm Sliding Head
Item No. Size (inch) 1pc 550mm Universal Handle
6pt
2pcs Extension Bar: 200,400mm
3844SD 1-3/8
1pc Metal Box 686x265x108mm
3846SD 1-7/16
36021S 3848SD 1-1/2 10pcs Metric Sockets: 36,38,41,46,50,54,55,58,60,63
36021SD 3852SD 1-5/8 65,67,70,71,75,77,80mm
3854SD 1-11/16 Packing 1set/ctn, 40/41.5kgs/1.2’
21 Pcs 3/4” Dr. Socket Wrench Set SAE 3856SD 1-3/4
3858SD 1-13/16 38022SD
1pc 20” Reversible Ratchet Handle
3860SD 1-7/8
1pc 18” Sliding T-Bar
3864SD 2
2pcs Extension Bar: 4”,8” 22 Pcs 1” Dr. Socket Wrench Set SAE
3866SD 2-1/16
1pc Blow Mold Case 21”x14-1/4”x3-11/16” 3868SD 2-1/8 1pc 6-1/2” Reversible Head 24 Teeth
10pcs SAE Sockets: 7/8,15/16,1,1-1/16,1-1/8,1-3/16 3870SD 2-3/16 1pc 3-1/8” Sliding Head
1-1/4,1-5/16,1-3/8,1-7/16,1-1/2 3872SD 2-1/4 1pc 22” Universal Handle
1-5/8,1-3/4,1-13/16,1-7/8,2” 3874SD 2-5/16 2pcs Extension Bar: 8”,16”
Packing 1set/ctn, 13/13.5kgs/0.9’ 3876SD 2-3/8 1pc Metal Box 27”x10-7/16”x4-1/4”
3878SD 2-7/16
10pcs SAE Sockets: 1-7/16,1-1/2,1-5/8,1-11/16,1-3/4
3880SD 2-1/2
1-13/16,1-7/8,2,2-1/8,2-3/16,2-1/4,
1"Dr. Socket & Accessories 3882SD 2-9/16
2-3/8,2-1/2,2-5/8,2-3/4,2-15/16,3-1/8”
3884SD 2-5/8
3886SD 2-11/16 Packing 1set/ctn, 40/41.5kgs/1.2’
3888SD 2-3/4
3890SD 2-13/16
3892SD 2-7/8
3894SD 2-15/16
3800-1A 3896SD 3
Reversible Ratchet 24 Teeth 26”(660mm) 38100SD 3-1/8
18
D
D
D
D
37152 Engine Timing Tool Set
– Ford & Mazda
41012 12pcs Twist Socket Set
Cam shaft setting/locking plates are used to accurately
a ling a datum slot, located in the end of the camshaft, Contents:
with the top face of the camshaft housing to hold the 3/8" Dr.: 8,10,12,13mm (32L)
camshaft at the (tdc) top dead center position. locking 1/2" Dr.: 14,15,16,17,19,21mm (34L)
pins are designed to pass through datum holes in the Extension Bar: 8mmx74L, 12mmx80L
timing belt pulleys into fixed position timing holes on the
engine. the crankshaft tdc location pin is designed to
screw into the cylinder block and provide a stop for the
crankshaft to be positioned against to set the tdc position.
Crank shaft locking tools are used to set the crankshaft
timing position during both removal and replacement of
the timing belt. Fly wheel locking tool is required on
engines where the flywheel and crankshaft must be held
41025 25pcs Radiator Pressure
at the correct timing position this tool is used in Tester & Vacuum Type
conjunction with the appropriate tdc setting screw. Cooling System
A special four piece kit containing the necessary special
Contents:
pins required to lock the camshaft sprocket, flywheel and
1-Gauge : Test Range 0 ~ 2.5 bar.
align the crank shaft and fuel pump wheel checking the
1-Blue and 1x Black Connector.
valve timing on 2.0 & 2.4 liter chain driven engines and
17-Radiator Tester Caps.
or replacing the timing belt on 1.4 liter engines.
*Radiator Purge and Refill Tool.
55
Open Barrel Terminal & D-Sub, V.35
14/22/8-6
2.5/0.5/8-10