Tolerance on slot width H12. (Tolerances H7 or H8 on request)
Example: A T-slot DIN 650-28 H12 has a nominal slot opening (a) of 28 mm for bolt size M24 ( 1"). The T-slot height (H) according to the table below is 48 mm.
( 1 mm = 0.03937 inch, 1 inch = 25.4 mm)
Dimension for screw b (mm) c (mm) H (mm) e (mm)
a 10 M8 - 17.5 - 18 8 18 1.0 12 M 10 - 20.5 - 21 9 21 1.0 14 M 12 1/2" 23.5 - 24 10 24 1.0 16 M 14 - 26.5 - 27 11 27 1.0 18 M 16 5/8" 29.5 - 30 12 30 1.5 20 M 18 - 33.5 - 34 14 34 1.5 22 M 20 3/4" 37.5 - 38 16 38 1.5 24 M 22 7/8" 41.0 - 42 18 42 1.5 28 M 24 1" 47.0 - 48 20 48 1.5 32 M 27 1 1/8" 54 22 54 1.5 36 M 30 1 1/4" 60 25 61 2.0 42 M 36 1 1/2" 70 29 74 2.0