Professional Documents
Culture Documents
Textile Coatings........................... 2
Pigment Printing........................... 6
Glass Fibers................................ 8
• Global Support • Product Development • Sustainability and Quality Our goal is to help you identify Nonwovens & Waddings
Arkema Coating Resins operates If your application has special Arkema Coating Resins is committed a product from our ENCOR ®
globally to ensure you have access needs that cannot be met through to meet the quality and sustainability technology platform that enables
to product and technical support one of our existing products, needs of its customers, and to you to formulate a competitive
wherever you operate. contact your Arkema representative operate in a manner that helps advantage into your product line.
to discuss joint product development protect the safety and health of This product guide presents the
opportunities. customers, employees and members ENCOR ® product range of Pigment Printing
of the communities where we waterborne polymers for textile
manufacture and market our coatings, nonwovens and related
products. For full information on products and introduces new
quality, human health, safety and products developed in response to
sustainability visit our web site: demanding and dynamic market
www.arkemacoatingresins.com. needs.
Glass Fibers
• Choose from 100% acrylic, styrene
acrylic or vinylic chemistries.
• Improve Health, Safety &
Environmental profile of your
coatings without compromising
performances by using our Leather
innovative formalde-hyde free
self-crosslinking binders.
1
Textile Coatings
Textile Coatings
Textile Coatings
Formulations based on ENCOR ® Binder selection can be optimised
binders can be applied to fabrics depending on the type of textile
as paste or as foam, regardless and the end-use performance
of the application process (knife requirements, such as tensile
coating, rotary screen coating, and tear strengths, abrasion
etc.) and provide durability, resistance, stiffness, dimensional
protection and enhanced stability, chemical resistance and
Brookfield
Chemical Stabilizing Washing Abrasion Dry Cleaning
Reference Flocking Coating Lamination Tg (°C) Solids (%) pH Viscosity
Nature System Resistance Resistance Resistance
(mPa.s @ 23°C)
ENCOR® 1103 S • ACR A - 29 45.0 8.0 < 100 PPP P P Ideally suited for blackout coatings.
Pigment Printing
ENCOR® 1130 S • ACR A/NI - 16 45.0 7.0 < 200 PP P PPP Zero formaldehyde self-crosslinking binder.
ENCOR® 1217 S • • • ACR A/NI - 13 59.0 7.5 < 500 PP PP P High solid content.
ENCOR® 1219 • • ACR A - 12 50.0 3.5 < 200 P P PP Heat sealable. Ideally suited for foam applications.
ENCOR® 1269 S • • ACR NI - 12 45.0 2.5 < 200 PP P P Good compatibility with fluorocarbons.
ENCOR® 1115 • V/A A/NI -3 50.0 4.0 < 200 P P P Heat sealable.
• • •
Glass Fibers
ENCOR® 1222 S ACR A/NI +2 60.0 7.5 < 350 PP PP PPP High solid content.
Glass Fibers
ENCOR® 1248 S • ACR A/NI +13 45.0 4.5 < 150 PP PP P Ideally suited for decorative foils.
ENCOR® 1370 • V/V HEC +17 40.0 5.0 < 900 P PP P Excellent adhesion on hydrophobic substrates.
ENCOR® 1301 • VAC PVOH +39 55.0 4.5 < 3000 P PPP P Ideally suited for carpet backing.
ENCOR® 1736 • ACR A/NI +47 50.0 7.5 < 150 P PP P Heat sealable.
Leather
Leather
Textile Coatings
For Nonwoven applications, Nonwovens are used in type of nonwoven and end-use
ENCOR binders are used for
®
automotive, construction, civil performance requirements such
chemical web bonding and engineering and geotextile, as tear and abrasion resistance,
finishing treatment and help to household, hygiene, filtration, thermal dimensional stability,
improve the mechanical and cable wrapping and packaging water absorbency or repellency,
chemical properties of these applications. Binder selection resilience and softness.
highly versatile substrates. can be optimised depending on
Brookfield
Dry Wet Alcohol
Automo- Chemical Viscosity
Reference Wipes Interlining Geotextile Wadding Filtration Tg (°C) Solids (%) pH Tensile Tensile Tensile Hydrophily
tive Nature (mPa.s @
Strength Strength Strength
23°C)
ENCOR® 1103 S •• ACR - 29 45.0 8.0 < 100 P P P ++ Very high softness, however not tacky.
ENCOR® 1107 S S/A - 25 45.0 6.0 < 500 P P P –– Recommended for speciality papers.
ENCOR® 1130 S • ACR - 16 45.0 7.0 < 200 P P P + Formaldehyde free self-crosslinking binder.
ENCOR® 1217 S •• ACR - 13 59.0 7.5 < 500 P PP P ++ High solid content.
ENCOR® 1219 •• ACR - 12 50.0 3.5 < 200 P P P +++ Heat sealable.
Pigment Printing
Pigment Printing
ENCOR® 1269 S • ACR - 12 45.0 2.5 < 200 P PP PP –
fluorocarbons.
ENCOR® 1106 S •• • ACR -5 42.0 5.5 < 500 PP PP PP +++ Superior durability to dry cleaning.
ENCOR® 1237 S • •• •• ACR +11 45.0 5.5 < 250 PP PPP PPP +++ High resiliency.
ENCOR® 1239 S •• •• ACR +25 47.0 4.0 < 200 PPP PPP PP +++ High resiliency.
ENCOR® 1241 S •• ACR +30 50.0 2.5 < 250 PPP PPP PP +++ No yellowing, even at high temperature.
Glass Fibers
Glass Fibers
Formaldehyde free self-crosslinking binder. Excellent
ENCOR® 1432 S •• S/A +33 50.0 8.0 < 5 000 PPP PP PP ––
resistance against alkali.
ENCOR® 1753 S • •• ACR +35 50.0 2.5 < 250 PPP PPP PP +++ High resiliency.
ENCOR® 1770 S • • • ACR +35 50.0 2.5 < 200 PPP PPP PP + Recommended for wall covering.
ENCOR® 1345 S •• • V/A +36 45.0 4.0 < 100 PPP PPP PP + Good compatibility with fire retardant products.
Leather
Leather
Brookfield Viscosity
Stabilizing System
Standard Fabrics
Textile Coatings
Chemical Nature
(mPa.s @ 23°C)
Stretch Fabrics
Crockfastness
Dry Cleaning
Resistance
Resistance
Solids (%)
Washing
General
Tg (°C)
Reference
pH
When used in pigment pastes, washing and dry cleaning to reduce overall costs while
ENCOR ® binders provide resistance to printed fabrics. optimising fabric feel and soft
excellent crockfastness (rubbing ENCOR ® binders are designed touch properties. Best suited on knitted
cotton fabrics. Very high
resistance), good colour to have the lowest possible ENCOR® 1103 S • ACR A - 29 45.0 8.0 < 100 PP PP PP softness, however not
rendering plus outstanding thickener requirement helping tacky.
Formaldehyde free
ENCOR® 1130 S • ACR A/NI - 16 45.0 7.0 < 200 PP PPP PP self-crosslinking binder.
ENCOR® 1138 S S/A A/NI - 15 45.0 8.0 < 300 PPP PP PPP consumption.
Formaldehyde free
ENCOR® 1133 S • ACR A/NI - 12 56.0 7.0 < 2000 PP PPP PP self-crosslinking binder.
High flexibility.
High solvent
ENCOR® 1106 S • ACR A/NI -5 42.0 5.5 < 500 PPP PPP PPP resistance.
Pigment Printing
Glass Fibers
Glass Fibers
Leather
Leather
6 7
Glass Fibers
Textile Coatings
Textile Coatings
Arkema Coating Resins offers roofing membranes and roof contains no formaldehyde release
a range of binders designed to insulations, filtration media, agents but retains outstanding
meet the specific requirements and mats. Innovative products performance properties, can help
of Glass Fiber applications, such as ENCOR ® 1432 S, a meet your sustainability goals.
including building insulation, self-crosslinking binder that
Brookfield Viscosity
Facade Cladding
Chemical Nature
(mPa.s @ 23°C)
Wall Covering
Glass Mats
Solids (%)
Tg (°C)
Sizing
Reference
pH
ENCOR® 1222 S • ACR +2 60.0 7.5 < 350 Best suited for filtration applications.
Pigment Printing
ENCOR® 1310 • VAC +37 55.0 4.5 < 2000 Good affinity to polyester resins.
Glass Fibers
Leather
Leather
8 9
Leather Wet End Leather Finishing
Textile Coatings
Textile Coatings
Leather retanning baths based on stability over a wide pH range type of leather and end-use IMPREGNATION easy plate release, good embossing resistance in shoe upper,
ENCOR polymer solutions, are
®
and giving durable fullness and performance requirements. Formulations based on ENCOR ® retention and cut-through resistance. upholstery and automotive
suitable for a variety of wet-blue softness. Binder selection can binders show high wetting and Coatings based on ENCOR ®
applications, while retaining
leathers, showing very good be optimised depending on impregnation properties and resins are widely used in leathers a softer touch. These compounds
improve the grain resistance and for upholstery, furniture and can be further crosslinked
the finishing adhesion in full grain automotive trim. with aliphatic di-isocyanates or
Leather Type Properties Specific Features and Benefits
leather. polyaziridines. Binder selection
Brookfield Viscosity
TOP COAT
Chemical Nature
can be optimised depending
(mPa.s @ 23°C)
Buffed & Split
Solids (%)
EMBOSSING BASE COAT Compounds containing ENCOR
Full Grain
®
Leather
pH
Reference
Compositions based on ENCOR ®
binders show very high wet performance requirements.
binders provide high softness, and dry abrasion as well as flexion
Stabilized with PVOH. High filling effect. Avoids skin
ENCOR® 3300 • VAC 0 53.0 4.5 1 800
sticking.
Applications Properties Specific Features and Benefits
ENCOR® 3875 • • ACR +90 30.0 2.0 2 500 Stable at any pH. Gives full hand.
Brookfield Viscosity
Stabilizing System
(mPa.s @ 23°C)
Impregnation
Shoe Upper
Automotive
ENCOR® 3876 ACR +90 30.0 5.0 2 500 Stable at any pH. Gives full hand.
Solids (%)
Full Grain
Base Coat
Garment
Top Coat
Furniture
Leather
Tg (°C)
Reference
pH
ENCOR® 3879 • • ACR +80 35.5 6.0 7 000 Gives full hand and very good dyeing yield.
Pigment Printing
Good embossing retention.
ENCOR® 3255 • • A - 17 37.0 8.0 50 P P Cut through resistance.
Glass Fibers
A/ Self-crosslinking with
ENCOR® 3222 • NI
2 60.0 7.5 230 P P temperature treatment.
A/
ENCOR® 3240 • • • NI
+4 36.0 8.0 40 P P P Good scrub resistance.
Leather
Leather
10 11
Europe Americas Asia
Headquarters Headquarters Headquarters
- Arkema - Colombes, France - Arkema Coating Resins - Cary, NC - Arkema Greater China - Shanghai, China
- Coatex - Genay, France - Arkema Inc. - King of Prussia, PA - Arkema K.K. - Tokyo, Japan
Technical and R&D Centers Technical and R&D Centers Technical and R&D Centers
- Boretto, Italy - Coating Resins - Araçariguama, Brazil - Coatex - - Changshu, China - Coatex
- Genay, France - Coatex Coating Resins - Guangzhou, China - Sartomer - Coating Resins
- Sant Celoni, Spain - Coating Resins - Cary, NC - Coating Resins - Kyoto Technical Center, Japan
- Verneuil, France - Coating Resins - Sartomer - Chester, SC - Coatex - Navi Mumbai, India - Coating Resins
- King of Prussia, PA - Pasir Gudang, Malaysia - Coating Resins
Production Facilities - North Kansas City, MO - Coating Resins
- Boretto, Italy - Coating Resins Production Facilities
- Brummen, The Netherlands - Coating Resins Production Facilities - Changshu, China - Coatex - Coating Resins -
- Drocourt, France - Coating Resins - Alsip, IL - Coating Resins Kynar
- Gissi, Italy - Coating Resins - Araçariguama, Brazil - Coatex - Coating Resins - Kunsan, Korea - Coatex
- Genay, France - Coatex - Chester, SC - Coatex - Navi Mumbai, India - Coating Resins
- Moerdijk, The Netherlands - Coatex - Grand Rapids, MI - Coating Resins - Pasir Gudang, Malaysia - Coating Resins
- Mollet, Spain - Coating Resins - North Kansas City, MO - Coating Resins
- Sant Celoni, Spain - Coating Resins - Saint Charles, LA - Coating Resins
- Stallingborough, United Kingdom - Coating - Saukville, WI - Coating Resins
Resins - Torrance, CA - Coating Resins
- Villers St-Paul, France - Coating Resins -
Sartomer
- Zwickau, Germany - Coating Resins
12 13
ARKEMA - A limited liability company with capital of 630.296.920 euros - Cook Marcomm - 2/14
Global Headquarters + Asia Pacific Regional Customer Service
Americas Headquarters Americas
Arkema Coating Resins Arkema (China) Investment Co., Ltd. 1-866-837-5532 (toll free)
410 Gregson Dr. Shanghai Branch +1-919-469-6700
Cary, NC, (USA) 27511 6/F, Block 1, Life Hub @ Daning Europe
+1 919-469-6700 1868 Gonghexin Road +33 (0)1 49 00 79 44
Shanghai 200072, P.R. China
European Regional Tel: + 86 21 6147 6888 China
Headquarters Fax: + 86 21 6147 6777 / 6746 +86 21 6147 6888 (324)
Arkema Coating Resins Asia Pacific (excluding China)
420, rue d’Estienne d’Orves +603-7839-5888
92700 Colombes - France
+33 (0)1 49 00 79 44
IMPORTANT: The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since the
conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all
liability as to any results obtained or arising from any use of the product or reliance on such information; NO WARRANTY OF FITNESS FOR ANY
PARTICULAR PURPOSE, WARRANTY OR MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS
DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided within relates only to the specific product designated and may not be
applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before
commercialization. Nothing contained herein constitutes a license to practice under any patent and it should not be construed as an inducement to infringe
any patent and the users is advised to take appropriate steps to be sure that any proposed use of the product will not result in patent infringement.
The product data provided in this document are typical values, intended only as guides, and should not be construed as sales specifications.
The products described in the brochure are not Medical grades designated for Medical Device applications.
Arkema has implemented an internal Medical Policy regarding the use of Arkema products in Medical Devices applications. Arkema has designated Medi-
cal grades to be used for Medical Device applications. Products that have not been designated as Medical grades are not authorized by Arkema for use in
Medical Device applications.
In addition, except for limited cases as determined by the Medical Device Policy, Arkema strictly prohibits the use of any Arkema products in Medical Device
applications that are implanted in the body or in contact with bodily fluids or tissues for greater than 30 days.
For any use of Arkema’s product in Medical Device applications, please contact Arkema’s sales network.