Professional Documents
Culture Documents
4MB1 01 MSC 20210304
4MB1 01 MSC 20210304
January 2021
Edexcel and BTEC qualifications are awarded by Pearson, the UK’s largest awarding body. We provide a wide range of qualifications including
academic, vocational, occupational and specific programmes for employers. For further information visit our qualifications websites at
www.edexcel.com or www.btec.co.uk. Alternatively, you can get in touch with us using the details on our contact us page at
www.edexcel.com/contactus.
Pearson aspires to be the world’s leading learning company. Our aim is to help everyone progress in their lives through education. We
believe in every kind of learning, for all kinds of people, wherever they are in the world. We’ve been involved in education for over 150
years, and by working across 70 countries, in 100 languages, we have built an international reputation for our commitment to high
standards and raising achievement through innovation in education. Find out more about how we can help you and your students at:
www.pearson.com/uk
January 2021
Publications Code 4MB1_01_2021_MS
All the material in this publication is copyright
© Pearson Education Ltd 2021
General Marking Guidance
All candidates must receive the same treatment. Examiners must mark the first candidate in exactly the same way as they mark
the last.
Mark schemes should be applied positively. Candidates must be rewarded for what they have shown they can do rather than
penalised for omissions.
Examiners should mark according to the mark scheme not according to their perception of where the grade boundaries may lie.
There is no ceiling on achievement. All marks on the mark scheme should be used appropriately.
All the marks on the mark scheme are designed to be awarded. Examiners should always award full marks if deserved, i.e. if the
answer matches the mark scheme.
Examiners should also be prepared to award zero marks if the candidate’s response is not worthy of credit according to the mark
scheme.
Where some judgement is required, mark schemes will provide the principles by which marks will be awarded and
exemplification may be limited.
When examiners are in doubt regarding the application of the mark scheme to a candidate’s response, the team leader must be
consulted.
Crossed out work should be marked UNLESS the candidate has replaced it with an alternative response.
Types of mark
o M marks: method marks
o A marks: accuracy marks
o B marks: unconditional accuracy marks (independent of M marks)
Abbreviations
o cao – correct answer only
o ft – follow through
o isw – ignore subsequent working
o SC - special case
o oe – or equivalent (and appropriate)
o dep – dependent
o indep – independent
o awrt – answer which rounds to
o eeoo – each error or omission
No working
If no working is shown then correct answers normally score full marks
If no working is shown then incorrect (even though nearly correct) answers score no marks.
With working
If there is a wrong answer indicated on the answer line always check the working in the body of the script (and on any diagrams),
and award any marks appropriate from the mark scheme.
If it is clear from the working that the “correct” answer has been obtained from incorrect working, award 0 marks.
If a candidate misreads a number from the question. Eg. Uses 252 instead of 255; method marks may be awarded provided the
question has not been simplified. Examiners should send any instance of a suspected misread to review.
If there is a choice of methods shown, mark the method that leads to the answer on the answer line; where no answer is given
on the answer line, award the lowest mark from the methods shown.
If there is no answer on the answer line then check the working for an obvious answer.
Ignoring subsequent work
It is appropriate to ignore subsequent work when the additional work does not change the answer in a way that is inappropriate
for the question: eg. Incorrect cancelling of a fraction that would otherwise be correct.
It is not appropriate to ignore subsequent work when the additional work essentially makes the answer incorrect eg algebra.
Transcription errors occur when candidates present a correct answer in working, and write it incorrectly on the answer line; mark
the correct answer.
Parts of questions
Unless allowed by the mark scheme, the marks allocated to one part of the question CANNOT be awarded to another.
Working Answer Mark Notes
Question
1 45 30 2 M1 – both terms with the same common
45 15 15
8 8 denominator – allow
8 4 8
15 7 A1 must-see sufficient working and given as
1 a mixed number only (either their final
8 8
answer in their working or on the answer
line)
Total 2 marks
2 100 – 52 – 20 (= 28) or 2 M1 allow (52 + 20 + 42) – 100
100 – 42 – 20 (= 38) oe correct method to either get the % of year
8 who did not walk or the % of year 7 who
did, for example, in words would need to see
‘48% students are in year 8 and as 20%
walked therefore 28% did not walk’
42 – (100 – 52 – 20) or 52 – (100 – 42 – 20) 14 A1
Total 2 marks
3 360 2 M1
or 180 n 2 176n
180 176
90 A1
Total 2 marks
4 10 – (–2 × 3) 2 M1
16 A1
Total 2 marks
Working Answer Mark Notes
Question
9
CD 42 32 2.65 3 M1 Complete correct method for CD or
3
BC e.g. cos(CAD) CAD 41.409...
4
and CD 4sin(41.409...) or
BC 2 42 82 2(4)(8) cos(CAD)
"2.65" M1 Correct method to find angle ABC (e.g.
tan ABC
7 (= 32) and
2
5 BC 2 52
82 32 42
cos ABC ) or e.g.
2(8) 32
BC
cos ABC
5
27.9 A1 awrt 27.9 (For ref: 27.88556…)
Total 3 marks
10 2n 1 n 1 or 2 n 1 3 M1 Factorise the numerator or
denominator correctly
2n 1 1 A1 Fully correct fully simplified
or n expression
2 2
2n 1 is odd. A1 Fully correct reasoning e.g. 2n + 1 is
Dividing by 2 means odd, (2n + 1) / 2 is not an integer (oe
not an integer comment, for example, ‘gives a decimal’)
or
No marks if numerical examples
considered only
Question Working Answer Mark Notes
1
n is an integer so n
2
is not
Total 3 marks
11 (a) x 1 x 1 1 B1
(b) 218
1 218 1 p = 218 – 1 or q = 218 + 1 2 M1 ft (a) substituting 218 as x in either
factor or one value correctly stated, or p
and q correctly stated the wrong way round
p = 262 143 A1 (allow in terms of powers of 2)
q = 262 145
Total 3 marks
12 2795, 2805, 1595 or 1605 3 M1 at least 1 of the listed values seen
2795 M1 must be 2795 ≤ LB < 2800 and
1605 1600 < UB ≤ 1605
1.74 A1 must-see correct calculation.
awrt 1.74 (1.74143302…) but not left as an
exact value
Total 3 marks
13 13 11 13 11 3 M1 multiplying numerator and
denominator by 13 11
13 11 13 11
13 143 143 11 M1 dep attempt to expand top and bottom,
condone a maximum of one error –
13 143 143 11
2
13 11 24 2 143
condone
13 11
2 2
2
Question Working Answer Mark Notes
24 2 143 12 143 A1 cao sufficient working must be seen.
Correct answer with no working scores no
2
marks
Total 3 marks
15 (a) 5x 2 y 2 B1, B1
(b) 8a 6 2 B2 or B1 8an or ka6
Total 4 marks
16 (a) 2a xb ya or 2a 5b * or 2a * 12a 2 M1 where x and y are integers and * is any
single term.
or a(10b – 24a)
2a 5b 12a A1
(b) p 12 p 2 2 M1 Expands to give 2 correct terms
A1
Total 4 marks
17 (a) 1.68×10111 2 M1 for p 10 or 1.68 10 or
111 q
16.8 10110
A1 cao
(b) 2.18 1056 or 210 1054 2 M1
k = 218 A1 Allow 218 1054 if given as a final
n = 54 answer in working only. Do not isw if
Question Working Answer Mark Notes
218 1054 seen in working then followed by
2.18 1056 either in working or on the answer
line
Total 4 marks
Question Working Answer Mark Notes
18 40𝑥 + 24𝑦 = 16 OR 15x 9 y 6 4 M1 – allow one arithmetic or sign slip only
9 x 24 y 12 15x 40 y 20
(+) 49 x 28 (–) 49 y 14 Correct answer with no working scores
no marks
OR
2 3y 2 3y
x and 3 8y 4
5 5
OR
8y 4 8y 4
x and 5 3y 2
3 3
OR
2 5x 2 5x
y and 3x 8 4
3 3
OR
3x 4 3x 4
y and 5x 3 2
8 8
4 2 A1 (oe – awrt x = 0.57(1428…) or y = –
x or y 0.28(57142…) to at least two decimal
7 7
places)
4 4 M1dep on M1
5 " " 3 y 2 or 3 " " 8 y 4 or Substituting their value into one of the
7 7
2 2 correct equations (give bod if sign slip when
5 x 3 " " 2 or 3x 8 " " 4 substituting value) or correct use of
7 7 elimination or substitution for other variable.
4 2 A1 – must see exact values at some point
x and y
7 7
Total 4 marks
Question Working Answer Mark Notes
19 (a) 33 + 3a – 3 = 0 2 M1 for 33 + 3a – 3 (oe) must be equal to
zero (or implied by later working)
a = –8 shown A1 – must see one line of working from
27 3a 3 0 to given answer.
Method 1
ABC = 90 (angles in a semi-circle or right-angled triangle in a semi-circle)
BAE + AED = 180 (co-interior angles or allied angles)
180 + 90 + 80 +120 + ACB = 540 (angles in a pentagon) leading to 70
Method 2
ABC = 90 (angles in a semi-circle or right-angled triangle in a semi-circle)
AED = 100 (opposite angles in a cyclic quadrilateral) then CAE = 60 (either opposite angles in a cyclic quadrilateral or angles in a
quadrilateral ) or vice-versa (e.g. find CAE then AED)
BAC + CAE + AED = 180 (co-interior angles or allied angles) leading to BAC = 20
ACB + 90 + 20 = 180 (angles in a triangle) or ACB + 90 + 80 + 120 + (20 + 60 + 100) = 540 (angles in a pentagon) leading to 70
Candidate might extend line AE to a point F (to the right of E) and say, ‘AED = 100 so DEF = 80 (angles on a straight line)’ and then ‘DEF =
BAE = 80’ (corresponding angles) (so may not use co-interior/allied angles)
Also note that the correct answer can come from assuming that both DEA and BAE = 90 – this can score a maximum of B1M1M0B1A0
Symbols may be used instead of words (e.g. for angle, for triangle, etc.)
Question Working Answer Mark Notes
22 (a) 1 2 M1
V 102 20
3
2090 2000
A1 – allow exact value or 2090 or
3
better - allow both 2093 (2093.333… from
using 3.14) and 2094 (2094.395… using )
(b) 3 3 1
1 1 1 M1 may be seen as a ratio
or 5 10
2 8
2 8 3
1 1 1
"2090" 1 " " or "2090" 52 10 M1dep allow for "2090" 52 10
8 3 3
1830 1750
A1 – allow exact value (=
3
1832.595715…) or awrt 1830 (most likely
to be from 1828 to 1833 to 4 sf)
Total 5 marks
23 Bar from 10 to 15 height 6.4 cm drawn Bar from 10 to 15 5 B1
height 6.4 cm drawn
4 36 7.2 0.8 2 36 M1 fully correct method to find the
e.g. 20 or 20 or 20 frequency of 15-17 bar.
10 8 1.6 2 58
36 A1 (correct answer implies previous mark)
184 – 20 – 80 – “36” ( = 48) M1dep on previous M mark
48 in table and A1 including frequency density axis labelled
Bar from 17 to 25 (1 cm square is 2.5)
height 2.4 cm drawn
Total 5 marks
Question Working Answer Mark Notes
24 (a) 62 2 3 2 M1
31 A1
(b) h x x 3 2
2
2 M1
full marks
(c) 3 1 B1
(d) y x 3 2 leading to x 3 y 2 3 M1 using y x 3 2 (oe notation e.g.
2 2 2
or h 1 x f 1
x 2 3 x 2
or