2005 Chevrolet Aveo

2005 ENGINE PERFORMANCE Engine Controls (Introduction) - 1.6L (L91) - Aveo

CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT

Removal Procedure

Fig. 124: Identifying Cover Screws

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.

2. Remove the engine cover bolts and the nuts.
3. Remove the engine cover.

Virtual Wrench
Friday, November 05, 2010 11:18:12
11:18:05 AM Page 1 © 2005 Mitchell Repair Information Company, LLC.
 2005 Chevrolet Aveo
2005 ENGINE PERFORMANCE Engine Controls (Introduction) - 1.6L (L91) - Aveo

Fig. 125: Disconnecting And Connecting CMP Sensor Electrical Connector And Bolt
Courtesy of GENERAL MOTORS CORP.

4. Disconnect the camshaft position (CMP) sensor electrical connector.

5. Remove the timing belt front cover. Refer to Timing Belt Replacement in Engine Mechanical-1.6L.

Installation Procedure

Virtual Wrench
Friday, November 05, 2010 11:18:06 AM Page 2 © 2005 Mitchell Repair Information Company, LLC.
 2005 Chevrolet Aveo
2005 ENGINE PERFORMANCE Engine Controls (Introduction) - 1.6L (L91) - Aveo

Fig. 126: Disconnecting And Connecting CMP Sensor Electrical Connector And Bolt
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

1. Install the CMP sensor and bolt.

Tighten: Tighten the CMP sensor bolts to 7 N.m (62 lb in).

Virtual Wrench
Friday, November 05, 2010 11:18:06 AM Page 3 © 2005 Mitchell Repair Information Company, LLC.
 2005 Chevrolet Aveo
2005 ENGINE PERFORMANCE Engine Controls (Introduction) - 1.6L (L91) - Aveo

Fig. 127: Identifying Cover Screws

Courtesy of GENERAL MOTORS CORP.

2. Install the timing bolt front cover. Refer to Timing Belt Replacement in Engine Mechanical-1.6L.
3. Connect the CMP sensor electrical connector.
4. Install the engine cover.
5. Connect the negative battery cable.

Virtual Wrench
Friday, November 05, 2010 11:18:06 AM Page 4 © 2005 Mitchell Repair Information Company, LLC.