Professional Documents
Culture Documents
Página 1 de 1
Cerrar SIS
Pantalla anterior
Producto: TRUCK
Modelo: 793C TRUCK 4AR
Configuración: 793C Off-HighwayTruck 4AR00001-UP (MACHINE)
POWERED BY 3516 Engine
Operación de Sistemas
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B,
793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry
Trucks Automatic Retarder Control (ARC) System
Número de medio -SENR5683-04 Fecha de publicación -01/08/2002 Fecha de actualización -27/08/2002
i01612721
Note: On current machines, a service tool is required to access any mode except for the normal mode.
The service tool must be used to perform the functions of the service switches and a service tool is used
to access the diagnostic information. Refer to the Testing and Adjusting, "Service Tools" for any
questions that are retaining to the service tools. On early machines, the diagnostic tools were on the
ARC.
The detected fault mode (mode 1) is the display mode. This mode provides the troubleshooting and the
clearing of each of the detected faults. The detected fault mode and normal mode described faults in the
same manner. The fault description is the CID, the FMI, and the fault present indicator.
While the ARC is in the detected fault mode, momentarily pressing the set switch will advance the
readout (9) in order to show the next fault. After all of the faults are shown, the readout will display
END. After the end, the readout will return to the first fault.
Copyright 1993 - 2006 Caterpillar Inc. Thu Jan 12 12:38:11 UTC-0400 2006
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://sis2001.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/... 12/01/2006