Ip ¥
een em aa
ie a
Se
GOVERNMENT OF INDIA
-
— ing
—
cPpwo
adie ate faater faster
CENTRAL PUBLIC WORKS DEPARTMENT
fare at separ
(airat-2) ~
DELHI SCHEDULE OF RATES
(Vol-2)
2018
Ferferaah, oll. fer a., tg leech -
Director General, CPWD, New DelhiCode Description Unit Rate
No. z
POINTING ON STONE WORK
13.33 Pointing on stone work with cement mortar 1:3 (1 cement :3 fine
sand)
13.331 Flush’ Ruled pointing sqm 285.40
13.332 Raised andcut pointing sqm 52075
1334 Raised and cutpointing on stone work in white cement mortar 1:3 (1
white coment :3 marble dust. sqm 538.25
13.35 Pointing on stone slab ceiling with cement mortar 1:2(1 cement :2
fine sand)
13.351 Flush’ Ruled pointing sam 158.00
13.38 Extra for pointing on walls on the outside at height more than 10 m
from ground level for every additional height of m orpart there of sqm 745
INTERIOR FINISHING
13.37 White washing with ime to give an even shade
13.371 Newwork three or more coats) sam 28.55
13.38 Satna lime wash on walls with one coat. sam 1150
1338 Colourwashing such as green, blue or butt to give an even shade
13.39.1 New work (two or more coats) with a base coat of white
washing with lime sam 38.95
13982 Newwork (two ormore coats) with abase coat of whiting sqm 38.50
18.40 __Disternpering with dry distemper of approved brand and manufacture
(two ormore coats) of required shade on new work, over andincluding
water thinnable priming coat to give an even shade. sam 775
13.41 Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade
13.41.1 Newwork (two or more coats) over and including water
thinnable priming coat with cement primer sqm 153.45
13.42 Distempering with 1st quality acrylic distemper (ready mixed)
having VOC content less than 50 gmsilitre, of approved
manufacturer, of required shade and colour complete, as per
‘manufacturer's specification
13.421 Two ormore coats onnew work sqm 8715
13.43 Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface
13.431 Water thinnable cement primer sam 60.00
EXTERIOR FINISHING
13.44 Finishing walls with water proofing cement paint of required shade
13.441 Newwork (Two ormore coats applied @3.84kg/10sqm) sqm 9125
13.45 Finishing walls wth textured exterior paint of required shade
1.45.1 New work (Two or more coats applied @ 3.281tr'10 sam)
over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm sqm 232.00
231Code Description Unit Rate
No. z
13.48 Finishing walls with Acrylic Smooth exterior paint of required shade
18.48.1 New work (Two or more coat applied @ 1.671r/10 sqm
‘ver and including priming coat of exterior primer applied
@2.20kg/10 sqm) sqm 164.70
13,47 Finishing walls with Premium Acrylic Smooth exterior paint with
Sllicone additives of required shade
18.47.1 New work (Two or more coats applied @ 1.43 I/10 sqm
‘over and including priming coat of exterior primer applied
@2.20kg/10 sqm) sqm 161.15
13.48 Finishing with Deluxe Mult surface paint system for interiors and
exteriors using Primer as per manufacturers specifications
18.48.1 Two or more coats applied on walls @ 1.25 lt/10 sqm
over and including one coat of Special primer applied @
0.75 ir /10 sqm sqm 142.20
1848.2 Painting wood work with Deluxe Multi Surface Paint of
required shade. Two or more coat applied @ 0.90 It/10
‘sqm over an under coat of primer applied @0.75 lr/10
sqm of approved brand and manufacture sqm 190.25
13.483 Painting Steel work with Deluxe Multi Surface Paint to
give an even shade. Two or mare coat applied @ 0.90 ri
40 sam over an under coat of primer applied @ 0.80 It!
10'sqm of approved brand and manufacture sqm 125.80
13.48 Finishing walls with 100% Premium acrylic emulsion paint having
VOC less than 50 gmilitre and UV resistance as per IS 15489:2004,
Alkali & fungal resistance, dirt resistance exterior paint of
required shade (Company Depot Tinted) with silicon additives.
13.48A1 New work (Two or more coats applied @ 1.43 litre!
10 sqm. Over and including priming coat of exterior
primer applied @ 0.90 litre/10 sqm. sqm 146.20
13,50 Applying priming coat:
18.50.1 With ready mixed pink or Grey primer of approved brand
and manufacture on wood work (hard and soft wood) sqm 57.05
1.50.2 With ready mixed aluminium primer of approved brand
and manufacture on resinous wood and plywood sqm 57.85
1850.8 With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel galvanised iron’
steel works sqm 50,70
13.504 — With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on stee! work (second.
coat) sqm 2720
1251 Painting with silicon & acrylic emulsion based water thinnable sealer
of approved brand and manufacture on wet or patchy portion of
plastered surfaces
1951.1 Onecoat sqm 8120
1351.2 Twocoats sqm 12905Code
No.
Description
Unit
Rate
1352
1353
1354
1355
13.58
1357
1358
13,58
13.60
1361
Finishing with Epoxy paint (two of more coats) at alllocattons prepared
and applied as per manufacturer's specifications including appropriate
priming coat, preparation of surface, etc. complete.
1852.1 Onsteel work
18522 — Onconerete work
Painting on GS. sheet with synthetic enamel paint of approved brand,
and manufacture of required colour to give an even shade
18.53.1 New work two or more coats) including a coat of approved
steel primer but excluding a coat of mordant solution
‘Applying a coat of mordant solution on GS. sheet:
18.541 With a solution of 38 gms of copper acetate in allie of
softwater
18.542 — Withasolution made of 13 gms of hydrochloric acid in a
solution of 13 gms each of copper chloride, copper nitrate
and ammonium chloride dissolved in alitre of soft water
Painting (two or more coats) on rain water, sollwaste and vent pipes
and fitings with black anticarrosive bitumastic paint of approved brand
and manufacture, over and including a priming of ready mixed zine
chromate yellow primer on new work:
19.55.1 100mm diameter pipes
1355.2 150mm diameterpipes
Painting (two or more coats) on rain water, sollwaste and vent pipes
and fitings with synthetic enamel paint of approved brand and
‘manufacture and required colour over a priming coat of approved
steel primer on new work,
18.56.1 100mm diameterpipes
1356.2 150mm diameterpipes
Painting with oil type wood preservative of approved brand and
manufacture
13.57.1_ Newwork (two or more coats)
Providing and applying two coats of fire retardant paint on cleaned
wood /ply surface @ 3.5 sam per ire per coat including preparation
ofbase surface as per recommendations of manufacturer to make
the surface fre retardant,
Coal tarring two coats on new work using 0.16 Litre and 0,12 litre
coal tar per sqmin the first coat and second coal respectively
Wall painting with acrylic emulsion paint of approved brand and
‘manufacture to give an even shade :
1860.1 Two or more coats on new work
Painting with synthetic enamel paint of approved brand and
‘manufacture to give an even shade :
1861.1 Twoormore coats on new work
sqm
sqm
sqm
sqm
sqm
metre
metre
metre
metre
sqm
sqm
sqm
sqm
sqm
199.75
199.40
138.00
4325
48.05
58.15
86.70
63.70
94.85
4450
292,00
50.30
12865
121.55
233,Code
No.
Description
Unit
Rate
13.62
13.63
13.64
13.65
13.68
1367
13.68
13.68
13:70
13.71
13:72
Painting with synthetic enamel paint of approved brand and
‘manufacture of required colour to give an even shade
13.62.1. Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and.
manufacture
Painting with aluminium paint of approved brand and manufacture to
give an even shade
13.63.1 Two or more coats on new work
Painting with acid proof paint of approved brand and manufacture of
required colour to give an even shade
13.64.1 Two or more coats on new work
Painting with black anti-corrosive bitumastic paint of approved brand,
‘and manufacture to give an even shade
13.65.1 Two or more coats on new work
Floor painting with floor enamel paint of approved brand and
‘manufacture of required colour to give an even shade
13.68.1 Two or more coats on new work
\Vamishing with varnish of approved brand and manufacture
1867.1 Two ormore coats of glue sizing with copal varnish over
an under coat of lating varnish
13.67.2 Two or more coats glue sizing with spar varnish or an
under coat of flatting varnish
French spirit polishing
18.68.1 Two or more coats on new works including a coat of
wood filer
Polishing on wood work with ready mixed wax polish of approved
brand and manufacture
18.698.1. Newwork
Floor polishing on masonry or concrete floors with wax polish of
approved brand and manufacture.
Lettering with black Japan paint of approved brand and manufacture
Washed stone grit plaster on exterior walls height upto 10 metre
above groundlevel, in two layers, underlayer 12 mm cement plaster
1:4 (1. coment : 4 coarse sand ), furrowing the under layer with
scratching tool, apolying cement slurry on the under layer @ 2 Kg of
coment per square metre, top layer 15 mm coment plaster 1:1/°2:2
(1 cement: 1/2 coarse sand :2 stone chipping 10 mm nominal size)
in panels wth groove all around as per approved pattem, including
scrubbing and washing the top layer with brushes and water to expose
the stone chippings .complete as per specication and direction of
Engineer‘in-charge (payment or providing grooves shallbe made
separately.
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
perletter
peremheight
sqm
1775
112.25
190.05
108.05
144.65
182.40
183.25
351.15
150.90
72.85
470
896.75Code
No.
Description
Unit
Rate
13:73
13:74
13,75
1376
137
1378
13:78
13.80
13.81
Forming groove of uniform size in the top layer of washed stone grit
plaster as per approved pattern using wooden battens, nailed to the
under layer, including removal of wooden battens, repair to the edges
of panels and finishing the groove complete as per specifications
and ditection of the Engineer-in-charge
18.73.1 15mmwide and 15mm deep groove
13.73.2 — 20mmwide and 15mm deep groove
Extra for washed grt plaster on exterior walls of height more than
10m from ground level or every addtional height of 3m or part
thereot.
Extra for washed stone grit plaster on circular work not exceeding
6 m in radius (in two coats)
Forming groove of uniform size trom 12x12 mm and upto 25x15 mm
inthe top layer of washed stone gritplastered surface as per approved
pattern, including providing and fixing aluminum channels of
appropriate size and thickness (not less than 2 mm), nailed to the
Under layer with rust proof serews and nails and finishing the groove
complete as per specifications and direction of the Engineer-in-
Charge
Extra for using white cement in place of ordinary cement in the top
layer of the iter of washed stone grit plaster.
Providing and applying 12 mm thick (average) premixed formulated
‘one coat gypsum lightweight plaster having additives and light weight
aggregates as vermiculite’ perlite respectively conforming to IS:2547
(Part- 1 & ll) 1976, applied on hacked / uneven background such as
bare brick! block! RCC work on walls & ceiling at all floors and
locations, finished in smooth line and level etc. complete.
Extra for addition of synthetic Polyester triangular fore of length 6
mm, effective diameter 10-40 microns and specific gravity of 1.84to
1.40 in cement plasterimortar by using 125 gms. of synthetic,
Polyester triangular fibre for 50 Kgs. cement used in cement mortar
as per directions of Engineer-in-Charge.
Providing and applying white cement based putty of average thickness
‘1mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete,
Distempering with 1st qualty acrylic distemper, having VOC (Volatle
(Organic Compound ) content less than 50 grame/litre, of approved
brand and manufacture, including applying additional coats wherever
requited, to achieve even shade and colour,
1881.1 Onecoat
1881.2 Twocoats
metre
metre
sqm
sqm
metre
sqm
sqm
per bag of
50kg of
coment
sqm
sqm
sqm
57.15
87.75
129.65
101.10
86.75
83.75
342.85
66.90
115.15
50.60
31.90Code
No.
Description
Unit
Rate
13.82
13,83
13.84
13.85
13,86
13.87
13.88
13.89
13,90
1391
Wall painting with acryic emulsion paint. having VOC (Volatile Organic
‘Compound ) content less than 50 grams/lite, of approved brand and
‘manufacture, including applying additional coats wherever required,
toachieve even shade and colour.
18.821 One coat
18.822 Twocoats
\Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound } content less than 50
‘grams! ite of approved brand and manufacture, including applying
‘Additional coats wherever required to achieve even shade and colour
1383.1 Onecoat
18.83.2 Twocoats
DELETED
18.841 DELETED
13.842 DELETED
Applying priming coats with primer of approved brand and
‘manufacture, having low VOC (Volatile Organic Compound ) content,
18.85.1 With ready mixed pink or grey primer on wood work
(hard and soft wood) having VOC content less than 50
grams! litre
1885.2 DELETED
13.85. With water thinnable cement primer on wall surface
having VOC content ess than 50 gramslire
6 mm plaster on cement conctete or reinforced cement concrete
work with white cement based polymer modified self curing mortar of
approved make as per the direction of Engineer-In-Charge
White washing with ime to give an even shade
18.87.1 Old work (two or more coats)
19.87.2 _ Oldwork (one ormore coats)
Removing white or colour wash by scrapping and sand papering and
preparing the surface smooth including necessary repairs to scratches
tte. complete
Distempering with dry distemper of approved brand and manufacture
(one or more coats) and of required shade on old work to give an
‘even shade,
Distempering with 1st quality acrylic distember (Ready mix)
having VOC contentless than 50 grams/litre of approved brand
‘and manufacture to give an even shade
18.90.1 Old work (one or more coats)
Removing dry or oil bound distemper, water proofing cement paint
andthe lke by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc, complete
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
71.80
108.80
75.10
113.90
57.05
60.00
205.50
16.75
10.25
1420
49.55
54.30
18.25
236Code
No.
Description
Unit
Rate
13.92
13.93
13.94
12.95
13.98
13.97
12.98
13.98
13.100
Painting on GS. sheet with synthetic enamel paint of approved brand,
and manufacture of required colour to give an even shade
18.921 Old work (one or more coats)
Painting (two or more coats) on rain water, soil, waste and vent
pipes and fitings with black anticorrosive bitumastic paint of approved
brand and manufacture over and including a priming coat of ready
‘mixed zinc chromate yellow primer an new work
18.93.1 75mmdiameter pipes
Painting (one or more coats) on rain water, soilwaste and vent pipes
and fitings with black anticorrosive bitumastic paint of approved brand
and manufacture on old work
18.941 75mmdiameter pipes
18.942 100mm diameterpipes
19,943 150mm diameterpipes
Painting (two or more coals) on rain water, sollwaste and vent pipes
and fitings with aluminium paint of approved brand and manufacture
‘vera priming coat of ready mixed zine chromate yellow primer on
new work
13.951 75mmdiameter pipes
13.95.2 100mm diameterpipes
13.953 150mm diameterpipes
Painting (one or more coats) on rain water, sollwaste and vent pipes.
and fittings with synthetic enamel paint of approved brand and
‘manufacture and required colour on ald work
18.96.1 75mmdiameter pipes
1896.2 100mm diameterpipes
18.98.38 150mm diameterpipes
Painting with oil type wood preservative of approved brand and
‘manufacture’
18.97. Oldwork (one ormore coats)
\Wall painting with plastic emulsion paint of approved brand and
‘manufacture to give an even shade:
19.98.1 One ormore coats on old work
Painting with synthetic enamel paint of approved brand and
‘manufacture of required colourto give an even shade
13.9.1 One armore coats on old work
Painting with aluminium paint of approved brand and manufacture to
give an even shade:
18.1001 One ormore coats on old work
sqm
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
sqm
sqm
sqm
sqm
71.05
43.60
2085
27.15
38,10
45.15
62.65
93.35
21.75
27.95
4020
33.80
84.65
79.95
73.25
237Code Description Unit Rate
No. z
13.101 Painting with acid proof paint of approved brand and manufacture of
required colour to give an even shade
18.1011 One armore coats on old work sqm 85.10
13.102 Painting with black anti-corrosive bitumastic paint of approved brand
and manufacture to give an even shade
18.102,1 One ormore coats on old work sqm 70.95
12.103 French spirit polishing
18.1031 One ormore coats on old work sqm 17885
13,104 Polishing on wood work with ready made wax polish of approved
brand and manufacture
18.1041 Old work sqm 7630
13.105 Re-ettering wih black Japan paint of approved brand andmanufacture. per letter
per em
height 3.00
13.108 Painting (one or more coats) with black Japan paint of approved
brand and manutactute to give an even shade. sqm 72.48
13.107 Providing and fixing C.P, brass chain and rubber plug complete for
sink or wash basin:
19.1071 32mmdia each 75.10
13.1072 40mmdia each 75.10
13.108 _Distempering with 1st quality acrylic distemper (ready made) having
VOC content less than 50 gm per Itr. of approved manufacturer
and of required shade and colour complete. as per manufacturer's
specification,
13.1081 One armore coats on old work sqm 48.05
13.109 Finishing walls with water proofing cement paint of required shade
18.109.1 Old work (one or more coats applied @ 2.20 kg/10 sqm)
over priming coat of primer applied @ 0.80 litrs/10 sqrm
complete including cost of Priming coat, sqm 87.20
13.1082 Old work (one or more coats @ 2.20 kg/10 sqm)
complete. sqm 59.35
13.110 Finishing walls with textured exterior paint of required shade
18.110.1 Old work (Two or more coats on existing cement paint
surface applied @ 3,28 Iv/10 sqm sqm 168.75
18.1102 Old work (One or more coats) applied @ 1.82/10 sqm. sqm 105.30
13,111 Finishing walls with Acrylic Smooth exterior paint of required shade
18.1111 Old work (Two or more coat applied @ 1.67 Ir’ 10 sqrn)
on existing cement paint surface sqm 99.90
18.1112 Old work (One or more coat applied @ 0.901It/10 sqm). sqm 67.35
238Code Description Unit Rate
No. z
13.112 Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade
18.112.1 Old work (Two ormore coats applied @ 1.43!tr! 10 sqm)
over existing cement paint surface sqm 97.75
19.112.2 Old work (one or more coats applied @ 0.83 tt10 sqm). sqm 66.95
12.113 Vamishing with varnish of approved brand and manufacture:
18.118.1 One ormore coats with copal varnish sqm 73.40
18.1182 One ormore coats with spar varnish sqm 73.85
13.114 Melamine polishing on wood work (one or more coat). sqm 10.75
13.115 Vamishing with flating vamish of approved brand and manufacture
cone or more coats on old work. sqm 76.65
Note: Item no 13.87 to 13.115 are brought from Sub Head 14
L.e, Repairs to Building Item no 14.42 to 14.71
239SUB HEAD : 14.0
REPAIRS TO BUILDING