This document provides instructions for performing standard and critical lifts using cranes operated by Saudi Aramco and contractors. It defines different types of crane lifts, identifies procedures for performing lifts, and responsibilities of riggers with different work capacities. The purpose is to improve safety when conducting crane activities. It also references various ASME and Saudi Aramco standards related to cranes, rigging, permits, and operator certification.
This document provides instructions for performing standard and critical lifts using cranes operated by Saudi Aramco and contractors. It defines different types of crane lifts, identifies procedures for performing lifts, and responsibilities of riggers with different work capacities. The purpose is to improve safety when conducting crane activities. It also references various ASME and Saudi Aramco standards related to cranes, rigging, permits, and operator certification.
This document provides instructions for performing standard and critical lifts using cranes operated by Saudi Aramco and contractors. It defines different types of crane lifts, identifies procedures for performing lifts, and responsibilities of riggers with different work capacities. The purpose is to improve safety when conducting crane activities. It also references various ASME and Saudi Aramco standards related to cranes, rigging, permits, and operator certification.
This General Instruction (GI):1.1 Specifies the methods, procedures, and
responsibilities for performing standard lifts and critical lifts thatinvolve onshore cranes operated by Saudi Aramco and/or contractor personnel.1.2 Defines various types of crane lifts.1.3 Identifies procedures required for performing various types of crane lifts.1.4 Identifies the categories and work capacities of riggers.1.5 Improves Saudi Aramco and contractor safety performance when involved in crane activities. 2.0 REFERENCES It shall be the responsibility of Saudi Aramco USERs and contractors to make themselves familiar with the currentversion of the various publications referenced below.ASME: American Society of Mechanical EngineersSAES: Saudi Aramco Engineering StandardA) ASME B30.1 JacksB) ASME B30.2 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top RunningTrolley Hoist)C) ASME B30.3 Construction Tower CranesD) ASME B30.4 Portal, Tower and Pillar CranesE) ASME B30.5 Mobile and Locomotive CranesF) ASME B30.6 DerricksG) ASME B30.7 Base Mounted Drum HoistsH) ASME B30.8 Floating Cranes and Floating DerricksI) ASME B30.10 HooksJ) ASME B30.11 Monorails and Underhung CranesK) ASME B30.14 Side Boom TractorL) ASME B30.16 Overhead Hoist (Underhung)M) ASME B30.17 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist) N) GI 2.100 Work Permit SystemO) GI 2.702 Moving Drilling Rig, High Clearance Equipment/Loads, or Operating Cranes Under or NearPower-LinesP) GI 7.024 Marine and Off-Shore Crane, Hoist and Rigging OperationsQ) GI 7.025 Heavy Equipment Operator Testing and CertificationR) GI 7.026 Cranes, Elevating and Heavy Equipment Accident ReportingS) GI 7.027 Crane Suspended Personnel Platform (Manbasket) OperationsT) GI 7.029 Rigging Hardware RequirementsU) GI 7.030 Inspection and Testing Requirements of Elevating/Lifting EquipmentV) SAES-A-114 Excavation and BackfillW) SAES-B-063 Aviation Obstruction Marking and LightingX) Saudi Aramco Construction Safety ManualY) Saudi Aramco Job Training Standards:1) Basic Crane Operator2) Advanced Mobile Hydraulic Crane O