Professional Documents
Culture Documents
WireCo’s Resin Spelter Buttons are intended to be a replacement for Liebherr’s swaged buttons used on
hoist ropes and attached to the original socket. To choose the proper Resin Spelter Button for a Liebherr
crane’s hoist, match the rope diameter, the button diameter and the overall length dimension with the
current button on the crane. These buttons are to be attached only to approved hoist ropes from Casar or
Oliveira by WireCo WorldGroup or their authorized distributors. Please read and understand the Warnings
and Instructions for Resin Spelter Button Kit.
Shown below are the Resin Spelter Buttons currently available for Liebherr crane hoist ropes. For convenience,
the size Wirelock® kit required for attaching the button is indicated.
Type A Type B
For Liebherr button dimensions not shown, please inquire. Do not substitute “nearly the same” buttons.
List of Parts:
RSBLEB-15-30-90 X X X X X
RSBLEB-17-36-108 X X X X X
RSBLEB-21-44-126 X X X X X
RSBLEB-23-52-175 X X X X X X
RSBLEB-25-52-175 X X X X X X
RSBLEB-28-58-203 X X X X X X
RSBLEB-32-65-220 X X X X X X
End Cap
Set Screw
Resin Spelter
Button