Professional Documents
Culture Documents
INTRODUCTION
The power button is known to occasionally get stuck behind the plastic backing of the T100.
This guide will show how to replace this.
TOOLS:
Flathead Screwdriver (1)
Separate the tablet from the base by pressing the large silver button below the tablet.
Step 2
Insert the plastic opening tool into the seam of the tablet casing and gently pry upwards.
With a little force, you will feel the clips release.
Step 3
Step 4
There will be some resistance. Slowly increase the pressure until the button pops off.
Use a small amount of epoxy or other adhesive to attach the new button.