Coil Information: 10. Are contacts making/breaking load current
1. a. Nominal Op. Voltage: ------- V (arcing?) Or, is load current passed to contacts b. Pull-In Voltage: ------- V after making/breaking process is completed? ---- c. Drop-out Voltage ------- V ----------------------------------------------------------------- d. Min. Hold Voltage ------- V ----------------------------------------------------------------- e Max. Voltage ------- V 11. Response Time a. Pull-In Time: ------- mSec 2. a. Operating Current: ------- mA b. Drop-out time: ------- mSec b. Pull-In Current: ------- mA c. Bounce Time: ------- mSec c. Max. Current ------- mA 12. QMS Test Procedure: -------------------------------- 3. Coil Resistance: ------- Ohm ----------------------------------------------------------------- 13. Contact Failure Rate: -------------------------------- 4. Other Coil Operating Conditions: ------- ----------------------------------------------------------------- ------------------------------------------------------------- 14. Expected Approvals (i.e. UL, CSA, TUV, etc.). ------------------------------------------------ Any other expected third party approval? ---------- ----------------------------------------------------------------- Contact Configuration: 5. Contact Form and Number: ------------------------ Ambient Operating conditions: ------------------------------------------------- 15. Ambient Temperature: min. ------- oC; max. ------- oC; 6. Contact Ratings: 16. Vibration Resistance : ------- g a. Voltage: min. ------- Vmax. ------ V (Amplitude): ------- Hz b. Voltage: min. ------- mA max. ------ A 17. Shock Resistance : ------- g c. Max. Power Capacity: ------- VA/W (Stroke): ------- mSec d. Making/Breaking Capacity: ------- VA/W 18. Standards Considered for Vibration and Shock e.Contact Resistance (new): ----- mOhm Tests: -------------------------------------------------------- ----------------------------------------------------------------- 7. Load Characteristics: 19. Pass / Fail Conditions: ---------------------------------- a. DC / AC (50 / 60 Hz) ----------------------------------------------------------------- b. Resistive; Inductive; Capacitive --------------- 20. Application Description: -------------------------------- -------------------------------------------------- ----------------------------------------------------------------- c. Power Factor; Time Constant; Capacitive 21. Notes and Wiring Diagram: Value --------------------------------------------------- d. Load Wiring Diagram / Contact Circuit
8. Switching Frequency: ------ Cycles/Sec
9. Service Life with Indicated Load:
a. Electrical Inductance: ------ Cycles 1. Relay Type Designation – Part Number ------------ b. Mechanical Inductance: ------ Cycles ----------------------------------------------------------------- ----------------------------------------------------------------- -----------------------------------------------------------------