Professional Documents
Culture Documents
T Proc Notices Notices 080 K Notice Doc 78501 337031848
T Proc Notices Notices 080 K Notice Doc 78501 337031848
Item descriptions
Specifications
35 17 H50 [cm]
90 55 H208 [cm]
90 46 H185 [cm]
Bottom part has 4 horizontal divisions, lined from bottom to top 40/20/30/30.
Doors, with glass, with handle.
Thickness glass 4 [mm], mounted using rabbet technique.
Hinges, minimum 3 pieces per door, EU product, CE certified.
Other specifications see 03011.
90 46 H208 [cm]
76 62 H175 [cm]
53 32.5 [cm]
Material, melamine impregnated veneer sheets panel.
91 ´ 30 ´ H91 [cm]Material, melamine, 18 [mm].
Colour, wood beech/oak/maple/cherry/ash.
Colour, object of approval.
Melamine particleboard must be machined-edged.Other specifications see 06010.
90 44 H91 [cm]
Dimensions:
- Back’s hight 51 [cm];
- Depth of seat 44 [cm];
- Width of seat 45 [cm];
- Changing the hight of the piston 43 ÷ 56 [cm].
The chair rests on a spherical 5-wheeled support, adapted for cement or parquet floors.
The load bearing leg consists of a spring-loaded piston with variable hight without
scaling, commanded by a handle under the seat.
The back is equipped with a device for adjusting the slope.
The seat has two plastic arms.
The seat and back are made of quality plastic material, filled with filling material
(sponge).
Coating material, quality textile tapestry or leather.
Colour of tapistry, approval object.
Deviation from specified dimensions is not allowed more than 5%.
Dimensions:
- Overall hight 70 ÷ 81 [cm];
- Back’s hight 35 [cm];
- Back’s width 45 [cm];
- Depth of seat 40 [cm];
- Width of seat 45 [cm];
- Distance of seat from the floor 46 [cm].
The seat and back are made of quality plastic material, filled with acrylic foam with a
thickness of 35 [mm] and a density of 28 [kg/m3], in order to create an ergonomic
shape.
Coating material, quality textile tapestry or leather.
Material of load bearing structure, oval steel tube with section 31.5 [cm] and
thickness 1.5 [mm].
The structure painted with electrostatic black paint with thermal treatment
(temperature 220°C), resistent to scratches and shocks.
Legs of the chair should be covered with PVC net, in order not to scratch when the
chairs are piled on top of each-other during transport.
At the bottom of the legs should be placed 5 [mm] thick plastic caps.
Colour of tapistry, approval object.
The chair should be easy to lift and transport by one user, with one hand.
Deviation from specified dimensions is not allowed more than 5%.
Dimensions:
- Overall hight 70 ÷ 81 [cm];
- Back’s hight 35 [cm];
- Back’s width 45 [cm];
- Width of plywood back support 32 [cm];
- Depth of seat 40 [cm];
- Width of seat 45 [cm];
- Distance of seat from the floor 46 [cm].
The seat and back are made of curved beech plywood 7 [mm] thick.
Plywood should be with milled edges.
Plywood should be lacquered with transparent, water based varnish.
Other specifications see 18011.
Distance of seat from the floor 38 [cm].
36 H61 [cm]
Seat, solid beech wood panel 25 [mm] thick, lacquered with transparent, water based
varnish.
Legs tube with circular section, with diameter no less than 30 [mm].
Ring of legs joining, tube with circular section, with diameter no less than 20 [mm].
Metal frame should be painted with electrostatic black paint with thermal treatment
(temperature 220°C), resistent to scratches and shocks.
The seat should be joined to the metal frame by means of screws, which are screwed
into the welded plates in the frame.
Welding, with continous seam.
Legs will rest on plastic caps, to which a little acrylic based adhesive/mastic should be
applied during assembly.
The colour of metal frame, approval object.
Frame, metal tube (steel), painted with electrostatic paint with thermal treatment
(temperature 220°C), resistent to scratches and shocks.
Bed’s ends + sides of upper bed, tube with circular section.
Mattress holding sides, tube with rectangular section.
Mattress holder, plywood 18 [mm] thick.
The ends of load bearing columns should be closed with plastic caps, to which a little
acrylic based adhesive/mastic should be applied during assembly.
Frame’s colour, object of approval.
Mattress dimensions 90 ´ 190 [cm]. Hight 34/86 [cm]. Frame, metal tube (steel),
painted with electrostatic paint with thermal treatment (temperature 220°C), resistent
to scratches and shocks. Bed’s ends, tube with circular section. Mattress holders,
orthopedic plywood, minimum number 7 pieces. The ends of load bearing columns
should be closed with plastic caps, to which a little acrylic based adhesive/mastic
should be applied during assembly. Frame’s colour, object of approval. Hight mattress
not less than 13 [cm]. Mattress construction with springs, filter and cover with mixed
synthetic material + dark colored cotton.
Adapted to the beds specifications. One side of the mattress for winter and the other
side for summer.
90 H60 [cm]
The board should be green colour, on which can be written with chalk.
The board should be surrounded by an aluminium frame with plastic arched joints at
angles.
An aluminium element should be mounted at the bottom of the frame, where chalks
and erasers are placed.
The surface of the board should be painted with acrylic-based paint, which creates a
magnetic field with the chalk, preventing the dispersion of the chalk dust into the
environment.
The surface must be resistant to scratches and acids.
The board should have 4 invisible fixation points on the wall, positioned in the plastic
corner joints.
The board should be easy to pack and assemble.
Table:
65 H100 [cm]
90 H60 [cm]
The board should be surrounded by an aluminium frame with plastic arched joints at
angles.
The board should have 4 invisible fixation points on the wall, positioned in the plastic
corner joints.
A B = 60 40 [cm]
C D = 46 29 [cm]
56 H173 [cm]
90 45 H35 [cm]
The diameter of holes where are placed glasses as much as glass diameter in the
middhight.
The material used will be seasoned beech wood. Its construction will be like a two-
storey house. Dimensions are different depending on the model.The colors are
different .
61 17 H120 [cm]
The material used should be mdf with a thickness of 16-18 mm. in its upper part to be
mounted on one side a sink with faucet material to let it make plastic life certified
according to CE standards, on the other side to be mounted 4 black circles which
imitate the piano that cooking. The front part will be built of lids and drawers. The
colors are different and the exact definition should be done in the terms of the
contract.
Material, hardwood.
Moisture content 12±1%.
Wood material should not present signs of biodegradation, checks and knots.
Section of elements 42 [cm].
Edges of all wooden elements should be milled.
Carpentry joints must be strong and worked with accuracy.
Screw heads shoud not come out above the surface.
The support should be lacquered with transparent water-base varnish or painted with
water-base paint.
Colour, approval object.
Material, stainless.
The desk should be solid.
Bottom of legs, with plastic caps.
Load bearing frame can be produced even by steel, painted with epoxy paint.
Before painting, the frame should be treated with antirust solutions.
Table dimensions:
140 x70 x H90 [cm]
75 x 30 x H90 [cm]
90 x 46 x H208 [cm]
Sides and shelves, melamine 18 [mm].
Top and bottom, melamine 25 [mm].
Colour, wood beech/oak/maple/cherry/ash.
Colour, object of approval.
The cabinet is separated in 6 equal horizontal compartments.
The middle shelf is fixed by means of screw joints.
Other shelves are removable (placed on metal pins).
On both sides, a minimum of 3 series of holes are drilled for each compartment, for the
serpentine (shelves) holding pins.
Other specifications see 05010.
90 x 46 x H128 [cm]
The cabinet is separated in 4 equal horizontal compartments.
Other specifications see 05010 & 05012.
31 x 40 x H10 [cm]
31 x 40 x H18 [cm]
Other specifications see 07012.
130 x 30 x H91 [cm]
70 H45 [cm]
120/75 60 H53 [cm]
Adapted to the children(todlers) bed specifications. One side of the mattress for winter
and the other side for summer.
170 90 H75/90 [cm]
90 30 H148 [cm]
The seat and back are made of curved beech plywood 7 [mm] thick.
Plywood should be with milled edges.
Plywood should be lacquered with transparent, water based varnish.
Material of plywood supporting frame, steel oval tube with section 31.5 [cm],
thickness wall 1.5 [mm].
Load bearing structure, rectangular section tube, with dimensions not less than 8040
[mm].
The structure painted with electrostatic black paint with thermal treatment
(temperature 220°C), resistent to scratches and shocks.
Legs will rest on plastic caps, to which a little acrylic based adhesive/mastic should be
applied during assembly.
Caps should be non-slip and should not create noises or scratches on the floor.
The colour of load bearing structure will be object of approval.
Deviation from specified dimensions is not allowed more than 5%.
Compliance with technical speci
Images Q-ty *
Yes, we
comply
21
39
16
120
23
172
30
14
22
11
12
15
11
165
15
9
12
326
844
117
32
234
250
142
420
1951
647
300
85
160
160
170
125
13
111
25
24
59
22
233
11
4
206
30
10
10
8
6
6
16
8
108
89
13
47
10
21
9
15
150
16
10
5
13
12
8
27
70
240
240
240
18
35
131
21
97
14
Bid Currency
Grand
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Sub-Total LOT I
-
____________________
____________________
____________________
____________________
Code Description
- 4
3 2 2
- 3
13 -
5 -
- 160 3
3 2 2
- 4
3 1 -
- 2 2
2 -
2 1 2
11
165
- 4
- - -
3 -
- -
- -
132 79 -
37 4 -
1 1 9
31 79 -
50 -
38 2 4
35 150 20
581 10 -
- -
60 -
85
160
160
170
24 -
3 -
14 8 6
- 1 -
- -
- 24
- -
- -
2 1 1
- 1
- -
25 81 -
- 10
- -
- 2
- -
- -
2 1
2 1
2 1 1
- 8
24 84 -
30 -
5 -
- 13
- -
- 7
- 3
- 15
150
3 3 -
2 -
1 2
3 -
- 12
- -
- -
70 -
- 90
90
90
- 18
- 35
- 131
- 10 -
5 79 -
5 -
LOT I
4 - 4
5 4 3
3 - 2
5 25 6
- 4 -
3 - 2
1 7 1
4 - 3
2 3 2
2 - 2
- 3 -
2 1 2
4 - 3
2 - 2
2 - 2
4 - 4
- 171 -
- 100 -
- 30 -
3 2 3
- 31 -
- 50 -
4 3 4
19 60 19
- 240 -
- 347 -
- 60 -
2 25 2
- 3 -
2 25 2
- 12 -
7 - 8
7 - 7
7 - 6
55 - 50
1 1 1
1 - 1
3 - 2
- 25 -
6 - 6
3 - 3
2 - 2
2 - 2
2 - 2
1 1
1 1
1 3 1
- - -
- - -
- - -
- - -
11 - 12
4 - 2
4 - 5
2 - 2
- - -
- 3 -
1 2 1
1 - 2
- - -
2 - 2
6 - 6
- - -
30 - 30
30 30
30 30
- - -
- - -
- - -
- 5 -
- - -
- - -
Gjergj Kastrioti Ismet Nanushi
- 9 -
9 4 4
- 8 -
18 5 36
4 - 6
- 4 -
4 1 7
- 3 -
3 2 3
- 3 -
3 - 2
1 2 1
- 4 -
- 4 -
- 2 -
- 4 -
- - 155
313 - 120
20 - 19
3 5 2
31 - 31
50 - 50
38 9 3
34 23 48
650 - 270
- - 300
60 - 60
36 4 18
2 - 4
20 5 20
- - 12
- 9 -
- 21 -
- 9 -
- 128 -
1 1 1
- 1 -
- 2 -
25 - 25
- 8 -
- 4 -
- 4 -
- 4 -
- 4 -
1
1
2 1 2
- - -
- - -
39 - -
5 - -
- 11 -
- 4 -
- 5 -
- 2 -
- - -
4 - -
2 1 -
1
3 2 -
- - -
- 4 -
- 15 -
- - -
- 90 -
90
90
- - -
- - -
- - -
- - 6
8 - -
5 - -
shi
High School
-
3
-
12
4
-
2
-
3
-
2
1
-
-
-
-
-
100
7
3
31
50
37
12
200
-
60
14
1
9
-
-
-
-
-
1
-
-
25
-
-
-
-
-
2
-
-
20
3
-
-
-
-
-
3
1
1
2
-
-
-
-
-
-
-
-
-
5
4