Professional Documents
Culture Documents
You are to model a parametric lego tile which can be controlled by length in pins and
width in pins. You will need to:
Create a basic part - (tip: start with an 8 x 8 tile) re-name your variables so
that you can recognise them in a design table.
Create a design table for your part. Replace the dumb Numbers with "drivers"
based on pin sizes and relationships or rules which you have worked out
dictate the tile configuration.
Show configurations for: 2 x 2, 4 x 4, 4 x 6 and 8 x 8 tiles.
To help you….