Professional Documents
Culture Documents
reviewer4@nptel.iitm.ac.in ▼
Week 3:
Technology of Mouldmaking and Core making,
Moulding Processes
Register for
Certification exam Assignment 3
The due date for submitting this assignment has passed.
Course As per our records you have not submitted this Due on 2019-02-20, 23:59 IST.
outline
assignment.
How to access 1) Which of the following is a sand ramming method used in machine 1 point
the portal moulding?
Week 1: Squeezing
Introduction to
Casting Jolting
Technology,
Slinging
Mechanism of
Solidification All of the above
Solution of Only i
Assignment 3
Only ii
Week 4: Gating
Both i and ii
design and
analysis None of these
Week 7: Casting
core print
of cast metal &
Melting practice chaplets
Cover core
Week 8: Felting
and Heat Hanging core
treatment of
casting,Casting No, the answer is incorrect.
defect and their Score: 0
Diagnostics
Accepted Answers:
DOWNLOAD chaplets
VIDEOS
6) Which of the following core is used when a hole or recess is to be 1 point
obtained in the casting either above or below the parting line?
Kiss cores
Ram-up core
Wing core
Cover core
No, the answer is incorrect.
Score: 0
Accepted Answers:
Wing core
7) Which of the following statement is/are correct for the casting based 1 point
on sodium silicate binder?
(i) Mould and cores do not need drying or baking. In some cases, not even
ramming.
(ii) The process is only used for ferrous castings.
Only i
Only ii
Both i and ii
None of these
No, the answer is incorrect.
Score: 0
Accepted Answers:
Only i
8) In which of the moulding process, hardening takes place because of 1 point
formation of silica gel:
9) Which of the following statement is/are correct for plaster moulding 1 point
process?
(i) Mould is prepared in gypsum plaster (mixed with water and additives)
(ii) Because of low refractoriness of mould, only nonferrous metal is cast
Only i
Only ii
Both i and ii
None of these
No, the answer is incorrect.
Score: 0
Accepted Answers:
Both i and ii
10)Which of the following statement is/are correct for graphite moulding 1 point
process?
(i) Graphite used as a mould material for producing steel castings,
particularly wheels for railway wagon and coaches.
(ii) Graphite has high resistant to thermal shock, a low coefficient of
expansion and the ability to resist distortion.
Only i
Only ii
Both i and ii
None of these
No, the answer is incorrect.
Score: 0
Accepted Answers:
Both i and ii