The soil investigation report determined the soil has a friction angle of 18 degrees, cohesion value of 21kPa, and dry and saturated unit weights of 14.809 kN/m^2 and 28.663 kN/m^2 respectively. The groundwater table is 11.2m below the surface. Manual calculations found the bearing capacities Qp, Qu, and Qs to be 185.22 kN, 725.61 kN, and 540.39 kN. A 1000mm x 1000mm RC square pile foundation with a design capacity of 725.61 kN was deemed suitable and economical to support the proposed loading, subject to load testing validation. PLAXIS modeling determined the
The soil investigation report determined the soil has a friction angle of 18 degrees, cohesion value of 21kPa, and dry and saturated unit weights of 14.809 kN/m^2 and 28.663 kN/m^2 respectively. The groundwater table is 11.2m below the surface. Manual calculations found the bearing capacities Qp, Qu, and Qs to be 185.22 kN, 725.61 kN, and 540.39 kN. A 1000mm x 1000mm RC square pile foundation with a design capacity of 725.61 kN was deemed suitable and economical to support the proposed loading, subject to load testing validation. PLAXIS modeling determined the
The soil investigation report determined the soil has a friction angle of 18 degrees, cohesion value of 21kPa, and dry and saturated unit weights of 14.809 kN/m^2 and 28.663 kN/m^2 respectively. The groundwater table is 11.2m below the surface. Manual calculations found the bearing capacities Qp, Qu, and Qs to be 185.22 kN, 725.61 kN, and 540.39 kN. A 1000mm x 1000mm RC square pile foundation with a design capacity of 725.61 kN was deemed suitable and economical to support the proposed loading, subject to load testing validation. PLAXIS modeling determined the
The purpose to do soil investigation to to determine the bearing capacity
of the soil, its settlement rate and the position of the water table. We had to analysis the soil investigation report and find out the soil parameters. The friction angle is 180. The cohesion value is 21kPa. The dry weight ,γdry is 14.809kN/m2. The saturated unit weight,γ satured is 28.663kN/m2. Moreover, we had find out, the existing ground is formed by two(2) subsoil layers from Reddish Yellow, Very stiff silty Clay to Dark Greyish,Hard, Silty Clay. The ground water table is 11.20m below existing ground surface.
We had calculate the Qp ,Qu,Qs by using manual calculations. The value of
Qp is 185.22kN. The value of Qu is 725.61kN. The value of Qs is 540.39kN. The data was analysis using the manual calculation.
By observing the ground condition and loading, pile foundation is deemed
the most suitable and economical system to support the proposed loading. 1000mm X 1000mm RC square pile foundation is deemed the most suitable and economical to support the loading. The proposed 1000mm X 1000mm RC square pile foundation with pile design capacity 725.61kN is deemed acceptable subject to load test validation. By using Plaxis software, we had designed and calculated the most suitable pile foundation. The extreme total spacement is 5.47X10-3m. It is safe to do the pile foundation with this design.