Professional Documents
Culture Documents
a) To burn the fuel in a confined closed system with the supply of air
Answer: c
Answer: a
3. What is the critical average pressure at which the single boiler unit per turbines is designed to handle?
a) 150 bar
b) 220 bar
c) 740 bar
d) 575 bar
Answer: b
c) By maintaining the boiler on daily basis by cleaning the soot and combustion products
Answer: a
5. Which type of boilers is preferred cost wise when the boilers are required to raise less than 30 tonnes
of steam?
a) Fluid boiler
b) Cornish boiler
c) Butterley boiler
d) Shell boiler
Answer: d
6. What is the temperature at which the steam boilers are capable to withstand?
a) 200oC
b) 280oC
c) 540oC
d) 358oC
Answer: c
7. The _________ may have water circulation either by natural means due to difference in density or by
external means.
a) Piping
b) Tubes
c) Furnace
d) Boiler
Answer: d
a) Force
b) Density
d) Viscosity
Answer: b
9. What is needed to be increased to increase the heat transfer rate in the boiler?
a) Gas velocities
b) Fuel input
c) Water velocities
d) Air supply
Answer c
a) Conduits
b) Cove
c) Channel
d) Tubes
Answer: d
a) Forced circulation
b) Natural circulation
c) Over-through
Answer: a
a) Water drum
b) Centrifugal pump
c) Furnace
d) Blower
Answer: b
13. Through what is feed water from hot-well is passed through, before entering steam and water drum
in Lamont boiler?
a) Evaporator tubes
b) Economizer
c) Distributer header
d) Circulating pump
Answer: b
14. In what form are the boiler’s tube arrange in Lamont boiler?
a) parallel in Vertical
b) Inclined vertically
c) parallel in horizontal
d) Horizontally inclined
Answer: c
15. Through which does the even circulation of feed water is possible in Lamont boiler?
a) Nozzles
b) Water trough
c) Feed pump
d) Hose
Answer: a
16. What is the pressure range between which Lamont boilers operates?
a) 80-120bar
b) 120-160bar
c) 180-360bar
d) 450-560bar
Answer: b
17. In which year was Lamont boiler invented?
a) 1905
b) 1910
c) 1920
d) 1925
Answer: d
a) Saturated steam
b) Unsaturated steam
c) Superheated steam
d) Flash steam
Answer: a
d) Outside of boiler
Answer: d
c) Formation of bubbles
Answer: c
21. In which year was Benson boiler was invented?
a) 1918
b) 1920
c) 1921
d) 1922
Answer: d
d) Over-through boiler
Answer: a
Answer: b
c) Deposition of salts
d) Bubble formation
Answer: c
25. Why starting valve is closed and valve 2 is opened while taking boiler on range in Benson boiler?
Answer: a