Professional Documents
Culture Documents
OPTIONS
www.BMCcranes.com
CONSULT THE IC-35-G ENGINEERING SPEC FOR ADDITIONAL INFORMATION.
IC-35-G
Solid Rubber Tires Tubular steel weldment with heavy expanded
CAPACITY ON OUTRIGGERS For applications where hazardous ground steel mesh top section for units without All
8,000 lbs. (3,620 kg) conditions exist. Weather Cabs.
Solid Rubber Tires - Non Marking Floor Mat
PICK AND CARRY CAPACITY Foam Filling of Tires Vinyl mat with foam backing.
Industrial Crane
up to 6,700 lbs. (3,040 kg) Spare Tire & Wheel - Pneumatic
Spare Tire & Wheel - Solid Rubber
Spare Tire & Wheel - Solid Rubber, Non Marking ELECTRICAL
HEIGHT Foam Filling of Spare Tires Strobe Lights
6’ 6” (1.98 m) Yellow strobe light mounted on each side of The IC-35 is small in size
CHASSIS OPTIONS turret weight box.
WIDTH Auxiliary Winch Boom Work Lights with big crane features.
5’ (1.52 m) Mounted behind the front bumper, hydraulically One work light mounted to boom to light boom This machine is a customer
driven with control in operator’s console - 3,000 tip and one work light mounted to turret to
lbs (1,360 kg) @ 20 FPM (6m/min). light ground under boom tip. Includes switch in favorite because of its
BOOM ROTATION Pintle Hook - Rear operator’s compartment.
360° Continuous Holland “T-60-A” pintle hook mounted on rear of RCL Light Bar legendary reliability. It’s tight
frame. 5-ton capacity. 3 color light bar for external indication of load turning radius is perfect for
SHEAVE HEIGHT Lifting Sling status
up to 33’ 4” (10.2 m) Three leg lift sling to attach to Lifting Rings. maneuverability in
Rearview Mirrors
One mounted on right-hand deck stake and one EXTRA LONG WIRE ROPE Capacity space-constrained
HORIZONTAL REACH mounted on left-hand deck stake. Pivots out of 140 ft. (42.6m), boom stowable 8,000 lbs. (3,620 kg) work sites.
up to 27’ 2” (8.28 m) the way for obstacles.
Width
Broderson Cranes are manufactured to ISO 9001:2015 certified standards and have a market leading 5’ (1.52 m)
reputation for quality and reliability. Broderson Cranes are engineered for operating efficiency and are
easy to operate and maintain.
An extensive network of full-service dealers offer parts and service support
by factory-trained technicians.
For additional options or special equipment not listed, please consult your dealer salesperson or contact Broderson Manufacturing Corp.
COMPARTMENT
GENERAL
OPERATOR
Boom Movement Continuous 0˚ to 70˚ 12’ (3.66m)
RIGHT HAND Boom Speeds 1.5 RPM 17 sec. 32 sec.
Weight Total 7,860 lbs. (3,565 kg.) Provides one-position access to all chassis & crane functions.
9'-1 3/4" (2.79 m) Travel Speed 0 to 10 mph (16 km/h)
Includes adjustable operator’s seat, retracting seat belts, fire
3'-6" extinguisher & bubble level.
4'-9" (1.45 m) Drawbar Pull 2,120 lbs. (960 kg.)
(1.07 m)
TAILSWING Gradeability 30%
ENGINE
Type Dual Fuel Diesel
LIGHTING PACKAGE
2'-0 1/2" 5'-0" OAW One pair headlights and taillight.
FRONT (62 cm) (1.52 m) Cylinder 4 3
(12-VOLT SYSTEM)
ELECTRICAL
8" 10" 1'-8" (51 cm)
Displacement 1.6L 1.8L DISPLAY
(20 cm) (25 cm) HP @ Gov. Speed 44HP (35kW) 50HP (37kW) Fuel, voltmeter, oil pressure, and water temperature gauges,
Fuel Tank Capacity 13.5 gal. (51L) 13.5 gal. (51L)
hydraulic oil temperature gauge and hourmeter.
HYDROSTATIC
reverse.
360° ROTATION
OUTRIGGER ALARM SYSTEM
PUMP
Piston type, direct driven from engine crankshaft. 112 dB alternating two-tone alarm is activated when “outrigger
Maximum flow 34 GPM (120 L/min).
C 26'-0" down” controls are operated.
L LOADLINE C
L ROTATION (7.92 m) Maximum pressure 4,000 psi (275 bar).
7'-2" RETRACTED
(2.18 m) 2'-0"
19'-2" EXTENDED (61 cm)
HYDRAULIC
(5.84 m) TANDEM PUMP mounted to rear of hydrostatic piston pump.
Delivers 6 GPM (23 L/min) at 2,600 PSI (179 bar) for boom circuits
FRONT and 17 GPM (64 L/min) at 2,500 PSI (155 bar) for hoist circuit.
70°
AXLES
Channel shaped structure houses torque hubs, brakes and System protected by relief valves. Hydraulic oil reservoir has 14
hydraulic drive motors. Axle oscillates a total of 1 1/2” (38 gallon (53L) capacity.
mm).
14'-9" REAR
(4.50 m) Fixed rigid to frame.
STEERING
THREE-SECTION BOOM ASSEMBLY
26° 21° equipped with bearing pads, double-acting hydraulic cylinders
Full hydraulic steering unit controls 2 1/2” (63 mm.) steering extends boom. The primary extension cylinder and the double-
cylinder attached to rear axle. acting boom elevation cylinder are equipped with direct
connected holding valves. Boom angle indicator on side of
6" 3 1/4" boom.
(15 cm) (83 mm)
1'-6" 3'-3" 2'- 9"
BOOM ASSEMBLY
(99 cm) (84 cm) BOOM ROTATION
(46 cm) Heavy-duty ball bearing rotation gear with external teeth. Rotation
TIRES BRAKES
1'-7 3/4" Primary braking from hydrostatic transmission. Foot-actuated is powered by hydraulic motor & worm gear drive.
(50 cm) disc brake attached to each torque hub for additional braking
6'-0" (1.83 m) BOOM HOIST
in some conditions. Parking brake switch locks brakes to hold
1'-11" 9'-11" (3.02 m) Turret mounted planetary gear hoist hydraulically powered with
9" crane when not being driven. a bare drum line pull of 5,000 lbs. (2,268 kg) & a line speed of
(58 cm) C (23 cm)
11'-11" (3.63 m) OAL L ROTATION 86 FPM (26 m). Hoist includes 85 ft. (26 m) of 3/8 in. (9.5 m) wire
rope, downhaul weight, swivel hook and sheave block for 2-part
FRONT line.
C
L ROTATION 7.5 x 10 pneumatic, 16-ply, 145 PSI, (1000 kPa)
REAR ANTI-TWO-BLOCK DEVICE
C
L ROTATION C
L HOOK Prevents damage to hoist rope and/or crane components from
7.5 x 10 pneumatic, 16-ply, 145 PSI, (1000 kPa)
pulling load hook against tip.
6'-9" RETRACTED CARGO DECK RATED CAPACITY LIMITER
18'-9" EXTENDED 9 sq. ft. (2.7m ) of deck area. 6,000 lbs. (2,720 kg) capacity on deck Warns operator of impending overload with audible & visual
when load is centered over or between axles. signals. Prevents overload by stopping boom functions that
cause overloads.
6'-6" OAH OUTRIGGERS
(1.98 m) CHASSIS Four hydraulic outriggers of box-beam construction. Independent
controls for each. Hydraulic cylinders are equipped with direct-
connected holding valves.
COMPARTMENT
GENERAL
OPERATOR
Boom Movement Continuous 0˚ to 70˚ 12’ (3.66m)
RIGHT HAND Boom Speeds 1.5 RPM 17 sec. 32 sec.
Weight Total 7,860 lbs. (3,565 kg.) Provides one-position access to all chassis & crane functions.
9'-1 3/4" (2.79 m) Travel Speed 0 to 10 mph (16 km/h)
Includes adjustable operator’s seat, retracting seat belts, fire
3'-6" extinguisher & bubble level.
4'-9" (1.45 m) Drawbar Pull 2,120 lbs. (960 kg.)
(1.07 m)
TAILSWING Gradeability 30%
ENGINE
Type Dual Fuel Diesel
LIGHTING PACKAGE
2'-0 1/2" 5'-0" OAW One pair headlights and taillight.
FRONT (62 cm) (1.52 m) Cylinder 4 3
(12-VOLT SYSTEM)
ELECTRICAL
8" 10" 1'-8" (51 cm)
Displacement 1.6L 1.8L DISPLAY
(20 cm) (25 cm) HP @ Gov. Speed 44HP (35kW) 50HP (37kW) Fuel, voltmeter, oil pressure, and water temperature gauges,
Fuel Tank Capacity 13.5 gal. (51L) 13.5 gal. (51L)
hydraulic oil temperature gauge and hourmeter.
HYDROSTATIC
reverse.
360° ROTATION
OUTRIGGER ALARM SYSTEM
PUMP
Piston type, direct driven from engine crankshaft. 112 dB alternating two-tone alarm is activated when “outrigger
Maximum flow 34 GPM (120 L/min).
C 26'-0" down” controls are operated.
L LOADLINE C
L ROTATION (7.92 m) Maximum pressure 4,000 psi (275 bar).
7'-2" RETRACTED
(2.18 m) 2'-0"
19'-2" EXTENDED (61 cm)
HYDRAULIC
(5.84 m) TANDEM PUMP mounted to rear of hydrostatic piston pump.
Delivers 6 GPM (23 L/min) at 2,600 PSI (179 bar) for boom circuits
FRONT and 17 GPM (64 L/min) at 2,500 PSI (155 bar) for hoist circuit.
70°
AXLES
Channel shaped structure houses torque hubs, brakes and System protected by relief valves. Hydraulic oil reservoir has 14
hydraulic drive motors. Axle oscillates a total of 1 1/2” (38 gallon (53L) capacity.
mm).
14'-9" REAR
(4.50 m) Fixed rigid to frame.
STEERING
THREE-SECTION BOOM ASSEMBLY
26° 21° equipped with bearing pads, double-acting hydraulic cylinders
Full hydraulic steering unit controls 2 1/2” (63 mm.) steering extends boom. The primary extension cylinder and the double-
cylinder attached to rear axle. acting boom elevation cylinder are equipped with direct
connected holding valves. Boom angle indicator on side of
6" 3 1/4" boom.
(15 cm) (83 mm)
1'-6" 3'-3" 2'- 9"
BOOM ASSEMBLY
(99 cm) (84 cm) BOOM ROTATION
(46 cm) Heavy-duty ball bearing rotation gear with external teeth. Rotation
TIRES BRAKES
1'-7 3/4" Primary braking from hydrostatic transmission. Foot-actuated is powered by hydraulic motor & worm gear drive.
(50 cm) disc brake attached to each torque hub for additional braking
6'-0" (1.83 m) BOOM HOIST
in some conditions. Parking brake switch locks brakes to hold
1'-11" 9'-11" (3.02 m) Turret mounted planetary gear hoist hydraulically powered with
9" crane when not being driven. a bare drum line pull of 5,000 lbs. (2,268 kg) & a line speed of
(58 cm) C (23 cm)
11'-11" (3.63 m) OAL L ROTATION 86 FPM (26 m). Hoist includes 85 ft. (26 m) of 3/8 in. (9.5 m) wire
rope, downhaul weight, swivel hook and sheave block for 2-part
FRONT line.
C
L ROTATION 7.5 x 10 pneumatic, 16-ply, 145 PSI, (1000 kPa)
REAR ANTI-TWO-BLOCK DEVICE
C
L ROTATION C
L HOOK Prevents damage to hoist rope and/or crane components from
7.5 x 10 pneumatic, 16-ply, 145 PSI, (1000 kPa)
pulling load hook against tip.
6'-9" RETRACTED CARGO DECK RATED CAPACITY LIMITER
18'-9" EXTENDED 9 sq. ft. (2.7m ) of deck area. 6,000 lbs. (2,720 kg) capacity on deck Warns operator of impending overload with audible & visual
when load is centered over or between axles. signals. Prevents overload by stopping boom functions that
cause overloads.
6'-6" OAH OUTRIGGERS
(1.98 m) CHASSIS Four hydraulic outriggers of box-beam construction. Independent
controls for each. Hydraulic cylinders are equipped with direct-
connected holding valves.
IC-35-G
Solid Rubber Tires Tubular steel weldment with heavy expanded
CAPACITY ON OUTRIGGERS For applications where hazardous ground steel mesh top section for units without All
8,000 lbs. (3,620 kg) conditions exist. Weather Cabs.
Solid Rubber Tires - Non Marking Floor Mat
PICK AND CARRY CAPACITY Foam Filling of Tires Vinyl mat with foam backing.
Industrial Crane
up to 6,700 lbs. (3,040 kg) Spare Tire & Wheel - Pneumatic
Spare Tire & Wheel - Solid Rubber
Spare Tire & Wheel - Solid Rubber, Non Marking ELECTRICAL
HEIGHT Foam Filling of Spare Tires Strobe Lights
6’ 6” (1.98 m) Yellow strobe light mounted on each side of The IC-35 is small in size
CHASSIS OPTIONS turret weight box.
WIDTH Auxiliary Winch Boom Work Lights with big crane features.
5’ (1.52 m) Mounted behind the front bumper, hydraulically One work light mounted to boom to light boom This machine is a customer
driven with control in operator’s console - 3,000 tip and one work light mounted to turret to
lbs (1,360 kg) @ 20 FPM (6m/min). light ground under boom tip. Includes switch in favorite because of its
BOOM ROTATION Pintle Hook - Rear operator’s compartment.
360° Continuous Holland “T-60-A” pintle hook mounted on rear of RCL Light Bar legendary reliability. It’s tight
frame. 5-ton capacity. 3 color light bar for external indication of load turning radius is perfect for
SHEAVE HEIGHT Lifting Sling status
up to 33’ 4” (10.2 m) Three leg lift sling to attach to Lifting Rings. maneuverability in
Rearview Mirrors
One mounted on right-hand deck stake and one EXTRA LONG WIRE ROPE Capacity space-constrained
HORIZONTAL REACH mounted on left-hand deck stake. Pivots out of 140 ft. (42.6m), boom stowable 8,000 lbs. (3,620 kg) work sites.
up to 27’ 2” (8.28 m) the way for obstacles.
Width
Broderson Cranes are manufactured to ISO 9001:2015 certified standards and have a market leading 5’ (1.52 m)
reputation for quality and reliability. Broderson Cranes are engineered for operating efficiency and are
easy to operate and maintain.
An extensive network of full-service dealers offer parts and service support
by factory-trained technicians.
For additional options or special equipment not listed, please consult your dealer salesperson or contact Broderson Manufacturing Corp.