Professional Documents
Culture Documents
The combination of surfaces, materials and uses indicated may not always be possible
to achieve. It is essential that you consult the individual product technical sheets to
check their suitability. Information not mentioned on this list must be requested
directly from the Kerakoll India Helpline.
Surface:
Materials:
Uses :
Flooring and walls, for internal and external use, domestic applications, commercial
applications, street furniture
Preparation of the surface:
Adhesive Preparation:
Biocem is mixed using water and inert materials until a semi-dry consistency is
obtained. Use Kerakoll Quartzo to obtain certified screeds or use inert materials of
assorted grain size from 0 to 8 mm, cleaned from dust and earth residues, to create
screeds with thicknesses between 20 and 80 mm. The percentage of mixing water
varies depending on the humidity content in the inert material
Application:
Workability:
Pack 25 Kg
Shelf Life 12 months in the
original
packaging protect
from humidity
Adhesive from 2 to 10 mm
thickness
Coverage ≈ 1,2 kg/m2 per
mm of thickness
Temperature from +5 °C to
of the air, +35 °C
substrates and
materials
Pot Life +23°C ≈ 8 hrs
+35°C ≈7 hrs
Open time +23°C ≥30 min
(BIII tile +35°C ≥15min
according EN
14411)
Adjustability +23°C ≥35min
time (BIII tile
according EN
14411)
Foot +23° ≈ 36 hrs
traffic/grouting +35 °
≈24 hrs
of joints (Bla
tile according
EN 14411)
Grouting in +23° ≈ 24 hrs
walls (Bla tile +35° ≈ 18 hrs
according EN
14411)
Ready for use - light foot traffic
at +23 °C / ≈4/ 2 days
+35 °C (Bla - heavy traffic ≈ 6
tile according / 3 days
EN 14411)
Material and special surfaces :
Marble, Natural Stones and Recomposed Materials that are subject to deformation or
staining due to water absorption require a reactive adhesive. Marble, natural stones
and recomposed materials in general may have characteristics that vary even with
reference to materials of the same chemical and physical nature. For this reason it is
essential you consult Kerakoll India Helpline to request specific indications or to
carry out a test on a sample of the material. Check for the presence of any really
consistent traces of rock dust created during cutting, and remove them if found.
Do not use:
Performance:
Durability Test :
- adhesion after heat ageing ≥ 0,5 N/mm2 EN 1348