Professional Documents
Culture Documents
The precautionary measures are for the safety of the user, for the prevention of
property damage, and for the avoidance of any inconveniences due to an
Warning accident. These must be read and followed properly.
Emergency power
Components supply Terminal
Specification(Back Ass'y)
Sensor Ratch Open/Close Button
Back Ass'y
Deadbolt
Register Button
Manual Knob
Mounting Plate
UNICOR HIGHTECH CO., LTD For the Emergency use : if Open/Close Double Lock Button
www.unicor.co.kr button is not working, then just turn to
open by finger
Front ass’y Back ass’y Strike & Strike Spacer
- This manual may change without notice in case of product improvement. To Open the Battery Cover
- Product specifications are subject to change without prior notice.
- This manual may not be edited or changed without the manufacturer’s prior permission
As this is a keyless digital door lock, damage may occur User Manual/ Product Warranty / Installation
to parts of the dead lock system if it is not used according Template / AA LR6 Battery 4pcs / Screw
to the manual. Users should be fully aware of the manual Press slightly battery cover and push to the direction of the arrow to open.
and how to operate this product.
Opening the door from the outside (Password) Opening the door from the outside (Smart Tag) Registering the Password
The Password can register between 4 to 20 digits and 1 Password can use
Touch the registed smart tag at the touch plate where on the front ass'y 1. Press [Register] Button 2. Enter a New Password
1. Touch the keypad
"Bibi"
Press "3" button 1. Touch the keypad 2. Enter the Password 3. Press [#] 3. Enter the Password again 4. Press [ ]
Warning/Emergency Sound Release Human Detection Function Set/Release Types of consumer damage
Content of compensation
Within the warranty period After the warranty period
Remove a battery out after opening a battery cover or contact the registered * The door can be opened/closed by only human hands due to capacitive touch type
Failure occurs within 1 month from date of purchase Product replacement
smart key or input a password then press [*] button. The product
Failure occurs within 1 year from date of purchase Free-of-charge repair
1. Touch the keypad 2. Press [5] 3. Press [Register] button is used in
Battery replacement to complet normal
conditions
Same failure occurs 4 times or more Free-of-charge repair Paid repair
Replacement after depreciation
The repair parts are not available at the main office Product replacement based on a fixed rate.
When replace the beep melody comes on Not the case of failure
Mistakes and Paid repair
It will notice to replace the battery when those batteries getting
low voltage. mishandling Mistakes and mishandling by the user
"biriri" "bi~" "bi~"
by the user
Defective installation, and other reasons
How to replace the battery
After the first beep is sounded, please replace all the batteries to 1. Touch the keypad 2. Press [5] 3. Press [Register] button
new batteries within 7 days. to complet * Details of mistakes and mishandling by the user
It will stop the system, if not change the batteries after the beep sounded Not the case of failure Mistakes and mishandling by the user Other reasons
When needed to break the A visit for repair is needed as Failure and damage due to natu
The battery life span may differ according to manufacturer,date of product due to the loss of there are mistakes and mishan ral disasters such as fires, floods,
"biriri" "bi~" "bi~" secret code. dling by the user such as mistakes and damage from sea water.
manufacture, using environment
When the door is sagging, or in replacing batteries and unskill Penetration by water, condensa
(AA, Alkaline 1.5V 4pcs, Lifes pan :10 ~12 months if 10 times to installation is defective, requiring ful use of the product. tion and injection of chemicals,
CAUSION
use per day ) the product to be reinstalled. Defective operation due to poorly requiring the internal circuits to
Please check the batteries every 6 months to see if the
Intrusion/Breakage Alarm Function Request for checking the product inserted batteries and use of be replaced, and causing failures.
for possible problems while defective batteries.
batteries are leaking, in this case , the product will be damaged Notice in danger state by alarm for 3 minutes due to remove out the there is no specific symptom of Failure and breaking due to the
lock device by forced or breakage by abnormal way in door locked. a failure. use of the product for other
It can not change password digital key, smart card after purposes.
Problems in operation occur after
battery replacement beep is sounded until replace new battery. Failure and breaking caused by
High Temperature Warning System the user installs the product
directly. the user on purpose or from an
external impact.
If this system detect high temperatures, then it will activate an alarm, and release
External Emergency Power Supply door locking function to evacuate peoples quickly(This function is basic system,
therefore there is no setting or releasing the function). It will activate at 60℃, it
When it is time to replace the battery, and continue without replacing
the battery, the battery is discharged and the door lock not functioning
can vary depending on the installation environment.
Warranty
It will open the door within 5 seconds and alarm for 5 minutes when it detect the
normally.
high temperature(It will normal operation when the temperature down normally). ◎ The warranty period for all of the company’s products is 1 year from the date of purchase indicated
on the warranty certificate.
Product Specifications ◎ Even during the warranty coverage, users need to pay (the cost for trip, technical support and parts)
for some services if they are in the category of chargeable services.
Division Specification Remarks ◎ User generally submit the warranty certificate or other methods that contains the installation
Front ass’y 68W X 173H X24D mm Rated voltage: DC 6V information when needed to request a service.
(Front body) Working temperature: -20℃
to 65℃ ◎ If the warranty certificate is not available, users need to submit a receipt, a credit card receipt or
While contacting the external emergency Back ass’y 90W X157H X36D mm Sensor working temperature (High a cash receipt instead (Except for a simple receipt)
power terminal with a 9V(6F22) square (Main body) temperature): 65℃
◎ If it is impossible to show the purchase date, the warranty period will be applied by taking into
battry, enter the Password or contact Strike AL Alloy Diecasting Distance of Sensor : 2cm consideration the product’s manufactured date + expiration period (6 months)
smart card
◎ For products pruchased outside of Korea, please consult your local distiriboutor or reseller as warranty
Smart Tag 2pcs (for 320S) Up to 50pcs Register policies vary from country to country.
The lifetime of the batteries is based on the result of the tests by the company and is not an absolute measurement. It will vary UNICOR HIGHTECH CO., LTD
depending on the temperature and humidity of the installed locations as well as depending on the frequency of usage and the
quality of batteries. 62 EunCheong Street, Namdong-Gu, Incheon, Korea (zip. 21643)
* The functions, design, and composition of the product may change without prior notification for the purpose of improving its quality. http://www.unicor.co.kr