Professional Documents
Culture Documents
Description Features
BP3135D is a high precision primary-side feedback Built-in 650V Power MOSFET
and regulation controller for LED lighting, it operates Constant current control without secondary sense
in constant current control mode and is designed to and feedback circuit.
work in inductor current discontinuous conduction No Auxiliary winding for sensing and supplying
Ultra low operating current to improve efficiency
mode and especially suitable for flyback convertor
Universal input voltage
under universal input. The output power of system is
±5% LED current accuracy
recommended to less than 12W. LED short and open circuit protection
BP3135D integrates 650V power MOSFET. Since CS resistor short circuit protection
adopting primary sense and feedback control VCC under-voltage protection
Thermal regulation
technology, the secondary sense and feedback circuit is
Available in DIP-8 package
eliminated. The loop compensation components are
also removed while maintaining stability overall Applications
operating conditions. It uses patent pending source
LED Panel Light
driver architecture and demagnetization sensing
LED Ceiling Light
technology, the operating current is very low, and it
LED Bulb
doesn’t need the auxiliary winding for sensing the
Other LED lighting
output current and supplying the chip. The low
component counts and small system size are realized.
Since using the proprietary high accurate current sense
method, the BP3135D realizes ±5% accuracy of LED
The BP3135D offers rich protection functions
including LED open/short circuit protection, CS
resistor short circuit protection, thermal regulation, VCC
under voltage protection.
Typical Application
NP NS
AC BP3135D
4 VCC NC 8
2 ROVP NC 7
1 CS DRAIN 6
3 GND DRAIN 5
BP3135D_CN_DS_Rev.1.0 www.bpsemi.com 1
Bright Power Semiconductor Co. Confidential – Customer Use Only
BP3135D
High Precision PSR Constant Current LED Driver
Ordering Information
CS NC
XXXXXY: Lot Code
BP3135D
XXXXXY
ROVP NC W: Sign
WXYY
X: Year
GND DRAIN
YY: Week
VCC DRAIN
Pin Definition
Pin No. Name Description
Current sense. This pin connects a current sense resistor to GND to detect
1 CS
the primary current of transformer.
2 ROVP Connect a ROVP resistor to GND to set the LED open voltage.
3 GND Ground
BP3135D_CN_DS_Rev.1.0 www.bpsemi.com 2
Bright Power Semiconductor Co. Confidential – Customer Use Only