Professional Documents
Culture Documents
4 in 1 cot
2
STEP 1
ASSEMBLE FIXED SIDE TO ENDS
Cot End Fixed Side
HB PA PC
STEP 2
ASSEMBLE BASE TO ENDS Cot Base
HB PB
3
STEP 3
SCREW FOUR GUIDE PINS INTO ENDS FIRMLY
STEP 4
ASSEMBLE DROP SIDE
Drop Side
PD
4
STEP 5
FULLY SCREW IN LOCK ING BOLTS
b.
STEP 6
OPERATION
To lower drop side, lift from centre of top rail, hold side in that position while using your leg to push inward on
centre of bottom rail. Then allow to slide gently down.
5
HD
6
OpErAtIOn
To lower drop side, lift from centre of top rail, hold side in that position while using your leg to push inward on
centre of bottom rail. Then allow dropside to slide gently down.
MAINTENANCE
Check your cot regularly. Retighten all bolts. For after sales service contact Grotime Service Australia on
1300 799 912; or New Zealand on 0508 476 932;
WARNING WARNING
TO PREVENT FALLS, THE ENSURE YOUR CHOSEN LOCATION FOR THE COT IS A REASONABLE DISTANCE FROM
MATTRESS BASE OF THIS CURTAINS, BLINDS, HEATERS, AND POWER POINTS. ALWAYS KEEP MEDICATION, STRING,
COT SHOULD BE ADJUSTED ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM ANY
TO THE LOWEST POSITION POSITION IN THE COT.
BEFORE CHILD CAN SIT UP. BEFORE ASSEMBLING THE COT, ENSURE YOU HAVE A CLEAR AREA ON CARPET OR A THICK
BLANKET OR RUG. NEVER ASSEMBLE ON A HARD SURFACE.