Professional Documents
Culture Documents
PRELIMINARY
Title page
Procedure
Legal notice
PRELIMINARY
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2011 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Developed by the Alcatel-Lucent Documentation Team.
PRELIMINARY
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Contents
PRELIMINARY
About this document
Purpose ............................................................................................................................................................................................. ix
ix
2 Procedures
Procedure 2-2: Generate XML file by importing a delivered template file ......................................................... 2-8
2-8
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal iii
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Contents
....................................................................................................................................................................................................................................
Procedure 2-4: Establish static route for first-hop router (optional) .................................................................... 2-15
2-15
Index
PRELIMINARY
....................................................................................................................................................................................................................................
iv Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
List of figures
PRELIMINARY
1-1 Set OAMSyncControl object attributes for a plug and play setup .......................................................... 1-3
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal v
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY List of figures
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
vi Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
List of procedures
PRELIMINARY
2 Procedures
2-2 Generate XML file by importing a delivered template file ........................................................................ 2-8
2-4 Establish static route for first-hop router (optional) ................................................................................... 2-15
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal vii
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY List of procedures
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
viii Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
PRELIMINARY
About this document
About this document
Purpose
The purpose of this document is to describe how to integrate a new Alcatel-Lucent 9400
eNodeB in an existing LTE network.
Intended audience
This document is intended to provide integration instructions to customers and network
administrators for the Alcatel-Lucent 9400 eNodeB.
Supported systems
This document applies to the LTE Alcatel-Lucent 9400 eNodeB with release LA3.0.
Conventions used
The typographical conventions used in this document are described in the following table.
PRELIMINARY
Appearance Description
emphasis Text that is emphasized
document titles Titles of books or other documents
...................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal ix
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY About this document
....................................................................................................................................................................................................................................
Appearance Description
file or directory names The names of files or directories
graphical user interface text Text that is displayed in a graphical user
interface
keyboard keys The name of a key on the keyboard
system input Text that the user types as input to a system
system output Text that a system displays or prints
variables A value or command-line parameter that the
user provides
[] Text or a value that is optional
{ value1 | value2 } A choice of values or variables from which
{ variable1 | variable2 } one value or variable is used
Related information
The following documents are referenced in this document or include additional
information relevant to the Alcatel-Lucent 9400 eNodeB:
• Alcatel-Lucent 5620 Service Aware Manager Installation and Upgrade Guide, 3HE
05718 AAAE TQZZA or Alcatel-Lucent 5620 SAM Installation and Upgrade Guide,
3HE 05718 AAAE TQZZA
• Alcatel-Lucent 5620 Service Aware Manager Maintenance Guide, 3HE 05725 AAAx
TQZZA or Alcatel-Lucent 5620 SAM Maintenance Guide, 3HE 05725 AAAx TQZZA
• Alcatel-Lucent 5620 Service Aware Manager User Guide, 3HE 05618 AAAx TQZZA
or Alcatel-Lucent 5620 SAM User Guide, 3HE 05618 AAAx TQZZA
• Alcatel-Lucent 5620 Service Aware Manager Integration Guide, 3HE 06072 AAAx
TQZZA or Alcatel-Lucent 5620 SAM Integration Guide, 3HE 06072 AAAx TQZZA
• Alcatel-Lucent 5620 Service Aware Manager LTE RAN User Guide, 3HE 06262
AAAx TQZZA or Alcatel-Lucent 5620 SAM LTE RAN User Guide, 3HE 06262
AAAx TQZZA
• Alcatel-Lucent Long Term Evolution (LTE) Radio Access Network (RAN),
Alcatel-Lucent 9452 Wireless Provisioning System (WPS), WPS Software Installation
Procedure, 418-000-200 or Alcatel-Lucent LTE RAN, 9452 WPS Software Installation
Procedure, 418-000-200
• Alcatel-Lucent Long Term Evolution (LTE) Radio Access Network (RAN),
PRELIMINARY
....................................................................................................................................................................................................................................
x Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
About this document
PRELIMINARY
....................................................................................................................................................................................................................................
• Alcatel-Lucent Long Term Evolution (LTE) Radio Access Network (RAN),
Alcatel-Lucent 9400, eNodeB Commissioning Procedure, 418-000-300 or
Alcatel-Lucent LTE RAN, Alcatel-Lucent 9400, eNodeB Commissioning Procedure,
418-000-300
• Alcatel-Lucent Long Term Evolution (LTE) Radio Access Network (RAN),
Alcatel-Lucent 9400, eNodeB Software Upgrade Procedure, 418-000-303
Refer to Alcatel-Lucent Long Term Evolution (LTE) Radio Access Network (RAN),
Alcatel-Lucent 9400, Customer Documentation Overview, 418-000-010 for the purpose of
each document listed and other documents related to LTE. Refer to Alcatel-Lucent Long
Term Evolution (LTE) Radio Access Network (RAN), Alcatel-Lucent 9400, Terminology
Overview, 418-000-011 for a detailed list of LTE terminology.
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
one of the following telephone numbers:
• 1-888-582-3688 (for the United States)
• 1-317-377-8618 (for all other countries)
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com) .
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-
lucent.com/comments/enus/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal xi
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY About this document
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
xii Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
PRELIMINARY
1 1recautions and
P
Preparations
Overview
Purpose
This chapter describes precautions and preparations for the integration procedures for a
Alcatel-Lucent 9400 eNodeB.
Contents
Precautions 1-1
Preparations 1-2
Checklist 1-2
Precautions
Check that all the precautions/prerequisites have been completed prior to Alcatel-Lucent
9400 eNodeB integration.
PRELIMINARY
...................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 1-1
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Precautions and Preparations Preparations
....................................................................................................................................................................................................................................
Preparations
It is strongly recommended that this manual be read in its entirety before starting the
operations presented herein.
Checklist
Verify that the following items have been received and/or accomplished before
proceeding with the procedure to integrate the eNodeB into the LTE network:
Check Description
Verify the Alcatel-Lucent LTE RAN, Alcatel-Lucent 9400, eNodeB Commissioning
Procedure, 418-000-300 has been commissioned. Refer to Alcatel-Lucent LTE RAN,
Alcatel-Lucent 9400, eNodeB Commissioning Procedure, 418-000-300 for details.
Verify the 5620 SAM GUI with access plug-in on Operations, Administration, and
Maintenance (OAM) PC client have been installed and operational. Refer to
Alcatel-Lucent 5620 SAM Maintenance Guide, 3HE 05725 AAAx TQZZAfor details.
Verify the eNodeB capacity licensing (FRS 91652) and LTE RAN capacity licensing
(FRS 76847) are ready to accept another eNodeB. Refer to Alcatel-Lucent 5620 SAM
Installation and Upgrade Guide, 3HE 05718 AAAE TQZZA for details.
Verify the continuity between (to/from) the Alcatel-Lucent LTE RAN, Alcatel-Lucent
9400, eNodeB NEM User Guide, 418-000-390 and 5620 SAM through the S1,X2 and
OAM datapath by using ping, trace route, and loopback test. Refer to Alcatel-Lucent
LTE RAN, Alcatel-Lucent 9400, eNodeB NEM User Guide, 418-000-390 for details.
Verify the 5620 SAM and Network Performance Optimizer (NPO) key system
performance targets. Refer to Alcatel-Lucent 5620 SAM LTE RAN User Guide, 3HE
06262 AAAx TQZZA for details.
At least one user should be created in the 5620 SAM administrator group, the correct
access rights have to be set to allow the user to create a layout.
In a plug and play setup, verify the eNodeB software has been installed by referring
to Alcatel-Lucent LTE RAN, Alcatel-Lucent 9400, eNodeB Software Upgrade
Procedure, 418-000-303.
PRELIMINARY
....................................................................................................................................................................................................................................
1-2 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Precautions and Preparations Checklist
PRELIMINARY
....................................................................................................................................................................................................................................
Check Description
When creating a workorder with WPS in a plug and play setup:
• Set enableOnlineConfiguration to true, otherwise online provisioning will not be
enabled for that eNodeB by default.
Also set enableAutomaticUpgrade and enableAutomaticConfiguration to true
(see the attributes involved on the following figure).
• Set the exact name of the file containing the software to be loaded in the eNodeB
in the targetSWVersion attribute of the SoftwareControl object (same as in the
/opt/oam/lteran/data/swserver/enodebloads/ENBXXXX directory).
Refer to the Alcatel-Lucent LTE RAN, 9452 WPS User Guide, 418-000-201, for
additional information.
Refer to the current release notes for additional information, Alcatel-Lucent Long
Term Evolution (LTE) Radio Access Network (RAN) Release Notes, 418-000-005
Figure 1-1 Set OAMSyncControl object attributes for a plug and play setup
In LA3.0, only 3 cells are supported under one eNodeB, not 6 cells.
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 1-3
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Precautions and Preparations Checklist
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
1-4 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
PRELIMINARY
2 Procedures
2
Overview
Purpose
This chapter describes how to integrate the Alcatel-Lucent 9400 eNodeB into an existing
LTE network.
Contents
PRELIMINARY
...................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 2-1
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Procedures Functional software requirements
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
NEM supports encryption. The maintenance terminal supports an initial set of
functionality to support connecting to the eNodeB, including the collection of an IP
address and login support, including user authentication. Once connection is established,
functionality is provided to ensure connectivity is maintained or re-established if lost for
the duration of the maintenance terminal login session into the eNodeB.
Additional information for NEM can be found in the following documents:
Alcatel-Lucent LTE RAN, Alcatel-Lucent 9400, eNodeB NEM User Guide, 418-000-390
Procedures
The following table lists the procedures used to integrate the Alcatel-Lucent 9400
eNodeB into an active LTE network.
Procedure Actions
Procedure 2-1: “Check eNodeB parameters” Check the eNodeB parameters done during
(p. 2-4) commissioning.
Procedure 2-2: “Generate XML file by Generate the XML file to be used as a
importing a delivered template file” (p. 2-8) workorder.
Procedure 2-3: “Customize the template” Describes how to customize the eNodeB
(p. 2-14) template using WPS.
Procedure 2-4: “Establish static route for Establish a static route with a first hop router
first-hop router (optional)” (p. 2-15) when the eNodeB and server are on different
subnets.
Procedure 2-5: “Validate, and activate Declare, validate and activate the eNodeB
eNodeB” (p. 2-17) using the 5620 SAM.
Procedure 2-6: “Remove an eNodeB” Remove an eNodeB from the network during a
(p. 2-18) fallback, not usable or useful at a specific
location, or removing from a temporary
location.
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 2-3
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Procedures Procedure 2-1: Check eNodeB parameters
....................................................................................................................................................................................................................................
Procedure
Perform the following procedure to check the eNodeB parameters for integration into the
network.
...................................................................................................................................................................................................
1 Verify that eNodeB capacity licensing (FRS 91652) and LTE RAN capacity licensing
(FRS 76847) are ready to accept another eNodeB as described in Alcatel-Lucent LTE
RAN, Alcatel-Lucent 9400, Regional License Administrator (using LKDI) User Guide,
418-000-133.
...................................................................................................................................................................................................
Note: If the NEM has not been installed, refer to Alcatel-Lucent LTE RAN,
Alcatel-Lucent 9400, eNodeB NEM User Guide, 418-000-390 for details.
PRELIMINARY
....................................................................................................................................................................................................................................
2-4 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Procedures Procedure 2-1: Check eNodeB parameters
PRELIMINARY
....................................................................................................................................................................................................................................
Result:
The NEM startup window is displayed, followed by the NEM-eNB Connection
window (see the following figures).
...................................................................................................................................................................................................
3
Enter the User Name and Password and click OK.
The software performs a number of “Startup Checks”. Refer to the Alcatel-Lucent LTE
RAN, Alcatel-Lucent 9400, eNodeB NEM User Guide, 418-000-390 for possible
status/error messages.
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 2-5
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Procedures Procedure 2-1: Check eNodeB parameters
....................................................................................................................................................................................................................................
Result:
The NEM main window is displayed (see the following figure):
Refer to the Alcatel-Lucent LTE RAN, Alcatel-Lucent 9400, eNodeB NEM User Guide,
418-000-390 for a description of the following NEM main window tabs:
• eNB Properties (default tab) - Identifies the eNB Friendly Name and eNB Startup
Time of the eNodeB.
• SW Properties - Identifies the software file and version currently running, when the
software was downloaded, activated, and accepted, and what software is not running
on the eNodeB.
• VLAN 0 Transport Properties - Identifies the OAM VLAN ID, DHCP Mode, first and
second NTP and SNM IP addresses, and manual OAM IP addresses for the eNodeB.
• VLAN 1Transport Properties - Identifies the OAM VLAN ID, DHCP Mode, first and
second NTP and SNM IP addresses, and telecom IP addresses for the eNodeB.
• Clock Properties - Identifies the clock synchronization source for the eNodeB.
Attention: Do not change any of these parameters at this time.
...................................................................................................................................................................................................
4 Refer to the site CIQ and verify the parameters that appear under each tab for the eNodeB
being integrated.
...................................................................................................................................................................................................
5 When the check of the eNodeB parameters is complete, quit NEM by selecting File > Exit
PRELIMINARY
....................................................................................................................................................................................................................................
2-6 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Procedures Procedure 2-1: Check eNodeB parameters
PRELIMINARY
....................................................................................................................................................................................................................................
Result:
An exit confirmation message is displayed (see the following figure):
Click Yes to exit NEM and kill the process. Click No to return to NEM
(recommended).
...................................................................................................................................................................................................
6 Continue the integration process by going to the next procedure, Procedure 2-2:
“Generate XML file by importing a delivered template file” (p. 2-8).
E...................................................................................................................................................................................................
N D O F S T E P S
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 2-7
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Procedures Procedure 2-2: Generate XML file by importing a delivered
template file
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-8 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Procedures Procedure 2-2: Generate XML file by importing a delivered
PRELIMINARY
template file
....................................................................................................................................................................................................................................
Procedure
Perform the following procedure to import the delivered template file to generate the xml
file.
...................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 2-9
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Procedures Procedure 2-2: Generate XML file by importing a delivered
template file
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
2 Select Import and Export Wizard from the File dropdown menu (see the following
figure).
Result: The Import and Export Wizard window is displayed (see the following
figure).
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-10 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Procedures Procedure 2-2: Generate XML file by importing a delivered
PRELIMINARY
template file
....................................................................................................................................................................................................................................
Result: The Import templates (local file system) window is displayed (see the
following figure).
...................................................................................................................................................................................................
4 Select the template file from the Select changes to import list. Click Start, then close
(see the following figure).
...................................................................................................................................................................................................
5 Select Network in left pane and Edition tab in right pane (see the following figure). In
Object creation: create field, select ENBEquipment [LA_03_00/Enb0].
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 2-11
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Procedures Procedure 2-2: Generate XML file by importing a delivered
template file
....................................................................................................................................................................................................................................
Result: uniquename field and use template Model field are displayed (see the
following figure):
...................................................................................................................................................................................................
6 Enter a unique name for the eNodeB and select from the use template Model field.
...................................................................................................................................................................................................
7 Click Create. The ENBEquipment object is created and displayed (see the following
figure):
PRELIMINARY
....................................................................................................................................................................................................................................
2-12 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Procedures Procedure 2-2: Generate XML file by importing a delivered
PRELIMINARY
template file
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 2-13
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Procedures Procedure 2-3: Customize the template
....................................................................................................................................................................................................................................
Procedure
Perform the following procedure to customize the Core Engineering Delivery Note
template parameters using WPS. Depending on the environment, the following
parameters need to be updated in the DATABASE file using WPS . Additional
information can be found in Core Engineering Delivery Note concerning the template
parameters.
...................................................................................................................................................................................................
1 Note: Refer to the following link for the current delivery note:
Select Program Milestones in (https://wcdma-ll.app.alcatel-lucent.com/livelink/
livelink.exe?func=ll&objId=54888147&objAction=browse&sort=name&viewType=1
).
Select the attribute and enter the appropriate parameter to customize the template
according to the Core Engineering Delivery Note recommendation.
...................................................................................................................................................................................................
2 When template is complete, save the file and export from WPS and import it back to 5620
SAM. Refer to Alcatel-Lucent LTE RAN, 9452 WPS User Guide, 418-000-201 for
instructions to export the template.
Note: It is recommended that a copy of the workorder be kept on the “local system”
even if “Live repository server” mode is used to ftp the eNodeB creation workorder to
the 5620 SAM. The workorders are located in a directory that is not backed-up,
therefore not restored by backup and recovery procedures.
...................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
2-14 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Procedures Procedure 2-4: Establish static route for first-hop router
PRELIMINARY
(optional)
....................................................................................................................................................................................................................................
Procedure
Perform the following procedure to establish a static route when the eNodeB and 5620
SAM server are on different subnets.
...................................................................................................................................................................................................
1 In the 5620 SAM, establish a static route between the 5620 SAM server and eNodeB with
the following command:
Syntax: route -p add net <Target Subnet IP where eNodeB is
connected> -netmask <netmask> <Gateway IP>,
where -p means persistency (route is kept up after reboot)
Example:
# netstat -r
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
----------------- ----------------- ----- ----- ---------- ---------
default 172.26.192.254 UG 1 13974
172.26.192.128 pl8000 U 1 3103 nxge4
172.26.195.1 172.26.192.254 UGH 1 617
224.0.0.0 pl8000 U 1 0 nxge4
localhost localhost UH 45 1214230 lo0
2 After adding the OAM route, ping the eNodeB to verify connectivity. Refer to
Alcatel-Lucent LTE RAN, Alcatel-Lucent 9400, eNodeB Commissioning Procedure,
418-000-300 to add the OAM routing and 5620 SAM routing.
...................................................................................................................................................................................................
3 Continue with the following procedure to declare, validate and activate the eNodeB.
E...................................................................................................................................................................................................
N D O F S T E P S
PRELIMINARY
....................................................................................................................................................................................................................................
2-16 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Procedures Procedure 2-5: Validate, and activate eNodeB
PRELIMINARY
....................................................................................................................................................................................................................................
Procedure
Perform the following procedure to validate, and activate the eNodeB workorder.
...................................................................................................................................................................................................
1 See Alcatel-Lucent 5620 SAM LTE RAN User Guide, 3HE 06262 AAAx TQZZA for
RAN device configuration and discovery
• LTE RAN configuration management
• eNodeB device configuration and discovery
• eNodeB offline configuration
• eNodeB online configuration
E...................................................................................................................................................................................................
N D O F S T E P S
PRELIMINARY
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal 2-17
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Procedures Procedure 2-6: Remove an eNodeB
....................................................................................................................................................................................................................................
Procedure
Perform the following procedure to electronically remove an eNodeB from the LTE
network. If necessary, refer to Alcatel-Lucent LTE RAN 9412 Compact eNodeB
Maintenance Guide, 418-000-411 or 9926 BBU Maintenance Guide, 418-000-404 for
details to physically remove the eNodeB from the LTE network.
...................................................................................................................................................................................................
4 From the 5620 SAM client verify the selected eNodeB has been removed. The eNodeB
can be physically removed from the network.
E...................................................................................................................................................................................................
N D O F S T E P S
PRELIMINARY
....................................................................................................................................................................................................................................
2-18 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011
Index
PRELIMINARY
C check eNodeB parameters, 2-4 remove an eNodeB, 2-18
checklist, 1-2 .............................................................
H how to comment, xi
how to order, xi
how to use this document, ix
.............................................................
I intended audience, ix
.............................................................
P precautions, 1-1
checklist, 1-2
preparations, 1-2
.............................................................
R related information, x
....................................................................................................................................................................................................................................
9400 eNodeB Alcatel-Lucent – Internal IN-1
418-000-301 Release 3.0 (LA3.0) Proprietary – Use pursuant to Company instruction
Issue 0.08 March 2011
PRELIMINARY Index
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
IN-2 Alcatel-Lucent – Internal 9400 eNodeB
Proprietary – Use pursuant to Company instruction 418-000-301 Release 3.0 (LA3.0)
Issue 0.08 March 2011