Professional Documents
Culture Documents
REVISION: B
Customer:
Approved by
Revised History
Contents
Revision History
Contents
1. General Description
2. Mechanical Drawing
3. Pin Description
4. Electrical Characteristics
5. Optical characteristics
6. Reliability
7. Package Specifications
8. Precaution Relating Product Handing
9.Warranty
10.Notice
SPRING TREND LIMITED
1. General Description
GMT013-01 is a 240RGBX240 dot-matrix TFT LC D module. This module is composed of a TFT LCD
Panel, driver ICs, FPC and a Backlight unit.
1.2 Features
9 Drive IC ST7789VW -
10 Luminance(cd/m2) 250 (TYP)
11 Viewing Direction All View
12 Backlight 2 White LED
13 Operating Temp. -20℃~ + 70℃ ℃
15 Weight TBD g
Item Date Remark
2. Mechanical Drawing
11.1± 0.5
单面弯折区域
单面弯折区域
FPC
10.00
1.00 H MAX
0.35
2.00
10.30
FPC弯折示意图
FPC展开出货
SPRING TREND LIMITED
3. Pin Definition
FPC Connector is used for the module electronics interface.
4. Electrical Characteristics
4.1 Absolute Maximum Ratings
2W/3
W/3
H/3
Active area(H)
2H/3
Active area(W)
SPRING TREND LIMITED
5. OPTICAL CHARACTERISTICS
Measuring
Item Symbol Min. Typ. Max. Unit Remark
Conditions
θ = 0o
Response Time Tr+Tf 25 oC - 30 35 ms
φ = 0o
φ = 0o 25 oC - 80 -
θ
φ =180o 25 oC - 80 - Note
Viewing Angle Deg
(b)
φ = 90o 25 oC - 80 -
θ
φ =270o 25 oC - 80 -
Contrast Ratio CR - 25 oC 640 800 - - Note (c)
o
X 25 C 0.300 0.302 0.304
White o
Y 25 C 0.323 0.325 0.327
o
X 25 C 0.622 0.624 0.626
Color of Red
Y 25 oC 0.327 0.329 0.331
CIE o - -
X 25 C 0.286 0.288 0.290
Coordinate Green
Y 25 oC 0.520 0.522 0.524
o
X 25 C 0.134 0.136 0.138
Blue o
Y 25 C 0.135 0.137 0.139
Transmittance --
-- - 4.18 4.65 - % -
(with polarizer)
Note1:Def inition of Response Time.(white-black)
The response time is def ined as the time interval between the 10% and 90% amplitudes
SPRING TREND LIMITED
6. Reliability
6.3 ESD
7. Package Specifications
Item Quantity
Module per Primary Box
Holding Trays (A) 15 per Primary Box
Total Trays (B) 16 per Primary Box (Including 1 Empty Tray)
Primary Box (C) 1~4 per Carton (4 as Major / Maximum)
SPRING TREND LIMITED
7) Do not apply stress to the driver IC and the surrounding molded sections.
8) Do not disassemble nor modify the TFT display module.
9) Do not apply input signals while the logic power is off.
10) Pay sufficient attention to the working environments when handing TFT display modules to prevent
occurrence of element breakage accidents by static electricity.
* Be sure to make human body grounding when handling TFT display modules.
* Be sure to ground tools to use or assembly such as soldering irons.
* To suppress generation of static electricity, avoid carrying out assembly work under dry
environments.
* Protective film is being applied to the surface of the display panel of the TFT display module. Be
careful since static electricity may be generated when exfoliating the protective film.
11) Protection film is being applied to the surface of the display panel and removes the protection film
before assembling it. At this time, if the TFT display module has been stored for a long period of
time, residue adhesive material of the protection film may remain on the surface of the display
panel after removed of the film. In such case, remove the residue material by the method
introduced in the above Section 5).
12) If electric current is applied when the TFT display module is being dewed or when it is placed under
high humidity environments, the electrodes may be corroded and be careful to avoid the above.
SPRING TREND LIMITED