Professional Documents
Culture Documents
Dimensions in mm
Overall width 1050 mm
474
950 1640 728
C1TD.005-2
3317
3792
C1TD.001
Sweeping Equipment Capacities
Brush diameter 700 mm Hopper voided volume 1.0 m3
Brush speed Infinitely variable up to 120 rev./min. Fuel tank 55 litres
Nozzle width 600 mm Clean water tank 220 litres
Sweep rate/output @ 16 km/h 28,800 m2/hr (theoretical max.) Recirculation system 100 litres
Sweeping width 1500 - 2200 mm Total water system 320 litres
Hopper discharge height 1.35 m
Due to continuous product development Johnston Sweepers reserves the right to alter specifications without prior notice.
Technical Specification
Transmission: Impeller: Standard machine features:
Full hydrostatic transmission with closed loop High pressure centrifugal fan unit mounted 500 hour service intervals.
circuit and variable angle swash plate piston to hopper roof provides powerful suction Fully PM10 EUnited Compliant
pump. Drive to front wheels - maximum speed means for the pickup nozzle and dust
up to 25 km/h. conveying system. Driven by hydraulic motor Vibration:
All dynamic prime mover
with integrated heavy support bearings. components have been resiliently mounted
Dynamically balanced multivane low noise to minimise vibrations. Vibration levels in
Engine Control: fan impeller with wear resistant self cleaning accordance with 89/392/EEC as amended &
Mechanical engine control. Forward / reverse blades. according to ISO2631-1 (Body-Vibrations) &
selection with lever on the steering column. EN ISO 5349-1 (Hand-Arm-Vibrations).
Hopper:
Hopper material 1.4003 stainless steel. Reverse Warning:
Electrics: Discharge width 0.99 m. Audible warning device with night silent
12 volt system with 80 amp alternator. With integrated recirculation water tank. override.
Due to continuous product development Johnston Sweepers reserves the right to alter specifications without prior notice.