You are on page 1of 1

Page 1/1

Rev. 01_04.11.2014
Technical Product Information Part-No. 5301112

BECHEM Fluid W 68-3H Spray


Release and lubricating agent for direct food contact

Examples of Application
Release agent for machining surfaces, Food industry
sheet plates, knives, moulds, etc. Pharmaceutical industry Lubrication Solutions for
Lubrication of chains, seals **, Animal feed industry Industry
guideways, etc. BECHEM develops, produces
Conservation of metal surfaces
and sells high-performance
lubricants and process media all
over the world. The product
Properties range covers the fields of
special lubricants, lubricants for
Prevents adhesion of food Good creeping properties
Protects against corrosion Based on medical white oil DAB 10 industry and lubricants for metal
Neutral in smell and taste Low volatility, initial boiling point working and forming technology.
Clear, hence no risk of discoloration > 200 ° C All product formulations are
Direct contact with food is permitted Free from animal, genetically modified based on latest tribological
(NSF-3H-approval) ingredients and nut oils knowledge.

Characteristic data Approvals/References


Service temperature: -10 °C to +120 °C NSF-3H
Appearance: clear, colourless
400 ml spray can with 17 mm jet nozzle
available with 100 mm extension
Propellant: Propane/butane

Data of the active substance


Density at 15 °C g/cm³ 0,87 DIN 51757
Kin. viscosity at 40 °C mm2/s 68 DIN 51562
Kin. viscosity at 100 °C mm2/s 8,6 DIN 51562

Instructions for use

Spraying also possible when spraying can is held upside down

According to valid legislation, the product is not hazardous to health

* This lubricant is not suitable for consumption


** Prior to serial production product compatibility tests are recommended
CARL BECHEM GMBH
Weststr. 120
58089 Hagen · Germany
Phone +49 2331 935-0
Fax +49 2331 935-1199
The above data correspond to latest technology, modifications reserved. This information is intended as a guide and does not
bechem@bechem.de
necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data
upon request. www.bechem.com

You might also like