Caretex Discharge System
Jet-Flow™
Caretex patent-pending fluidizing discharge system - Jet-Flow™ is an
option that can be
corporated into any Caretex conti
er liner - 20 ft
or 40 ft ISO standard container or a 30 ft top load container.
The Jet-Flow™ consists of a perforated
semi-rigid tubing positioned inside the liner
in specific areas. The free end of these
tubes located outside the liner is connected
to pressurized air (or other gas) source
throughout the unloading. The perforation
made in the pipes will spray air jets up to
20cm from the hole in the tube.
Some dry bulk products are difficult or have
even been considered impossible to
discharge from a container liner because
the material characteristic is non-free
flowing or difficult to initiate flow.
Using a liner equipped with Jet-Flow™
Fluidizing System increases the range of
products being suitable for transport in a
dry bulk liner. Discharge of products which
can be fluidized becomes as easy as any
other free flowing products.
Perforated semi-rigid tubing
positioned inside the liner.
The Jet-Flow™ system can also be used to reduce the discharge time for
“hard to flow” products that are currently being shipped in dry bulk liners.
GRETEXTo use Jet-Flow” is as simple as
PLUG & BLOW
MAX, AIR PRESSURE
The connection tubes are easily accessible outside the liner. The air pressure can be reduced by regulating air flow
with the air management manifold.
The Jet-Flow™ 6mm inner diameter tube is
easily connected to the air management
manifold. This manifold can be used to
regulate the introduction of air to different
parts of the liner during discharge.
Caretex offers worldwide delivery and
support in the implementation of the
Jet-Flow™ unloading system.
Discharge of products which can be fluidized becomes
135 easy as any other free flowing products.
When activated the built-in perforated tubing
distributes the gas inside the liner and
thereby makes the product flow towards and
through the discharge opening of the
container liner.
The connection tubes are connected to pressurized air
‘or other gas source.
Caretex Jet-Flow™ liner can effectively and instantly cut the receivers handling
and unloading costs without compromising the safety factor during unloading.
www.caretex.dk