The document provides instructions for adjusting the release bearing plate height on a clutch cover to a specified height and parallelism tolerance. It also describes checking that the release lever end contacts the bearing plate and has less than a maximum clearance, as well as pressing the bearing plate to check for abnormal movement before locking the adjusting nut in place.
Original Description:
Original Title
toyota 5fd33-45-5fge35-5fde35-forklift-service-repair-manual_0071-0071
The document provides instructions for adjusting the release bearing plate height on a clutch cover to a specified height and parallelism tolerance. It also describes checking that the release lever end contacts the bearing plate and has less than a maximum clearance, as well as pressing the bearing plate to check for abnormal movement before locking the adjusting nut in place.
The document provides instructions for adjusting the release bearing plate height on a clutch cover to a specified height and parallelism tolerance. It also describes checking that the release lever end contacts the bearing plate and has less than a maximum clearance, as well as pressing the bearing plate to check for abnormal movement before locking the adjusting nut in place.
clutch cover instal lation surface as fol- flows: Set height: 66.8 mm (2.63 in.) Departure from parallelism of the plate. (inclination): 0.5 mm (0.019 in.) max.
Caution: When installing the adjusting nut, thinly coat grease (molybdenum disulfide base) on the . . . -
nut spherical surface. Adjusting the Release Bearing
Plate Height Check that the top of the release lever end is in contact with the bearing plate in the set status described in (2) above. (Release lever end deviation limit) Maximum allowable clearance 0.15 mm (0.006 in.) Push the release bearing plate at least five times with a press using 10 mm (0.39 in.) stroke. Make sure that no abnormal movement is observed. Check dimension in steps ( 1 ) to (3).