Professional Documents
Culture Documents
SANGHA’S
RAO BAHADHUR Y MAHABHALESHWARPPA ENGINEERING COLLEGE
(Formerly Vijayanagar Engineering College, Bellary)
CANTONMENT, BELLARY-583 104 (KARNATAKA).
1. Seminar report should be typed (Times New Roman style) neatly on one side of the
paper with 1.5 line spacing on a A4 size bond paper. The margins should be: Left-1.25”,
Right-1” and Bottom- 0.75” .
2. The total number of copies of the seminar report to be prepared are
One copy to the candidate.
One hard & soft copy to the Project Guides.
3. Before taking the final printout, the approval of the concerned guide(s) is mandatory
and suggested corrections, if any must be incorporated.
4. Seminar Report- student is required to write a conclusion about the seminar. The report
should consist of 20 to 25 single side pages describing the topic selected. The report
should be in the format as described below. It is important that you adhere to these
guidelines.
ARRANGEMENT OF CONTENTS:
The sequence in which the seminar report material should be arranged and bound
should be as follows:
1. Cover Page & Title Page
2. Abstract
4. Table of Contents
5. Acknowledgment
6. Chapters
7. Appendices
8. References
1
5. The organization of the report should be as follows.
Outer title page
Inner title page
Certificate in the format enclosed
Acknowledgments
Abstract or Synopsis
Table of contents
List of tables and figures
Reference: The references should be numbered in alphabetical order of the first
author. The section on references should list them in serial order in the following
format.
1. Al-Sanad, H.A., Eid, W.K. and Ismael, N.F. (1995). “Geotechnical Properties of
Oil-Contaminated Kuwaiti Sand,” Jl. of Geotechnical Engineering,Vol.7, pp407-
412.
2. Oppenheim, A.V. and Schafer, R. W.(1975) “Digital Signal Processing”,
N.J: Prentice Hall, 3rd Edition.
3. Web site www………….
Separator sheets should not be used between the chapters.
At the bottom of all the pages starting from chapter-1 to last chapter, a footer line
indicating department and college name should be typed.
Pages are numbered at right bottom corner.
All printing should be in black colour letters only.
The reports should be spiral binding.
2
VISVESVARAYA TECHNOLOGICAL UNIVERSITY
BELGAUM
MECHANICAL ENGINEERING
(font size 12 bold )
By
Mr. Xxxxx (USN)
(font size 14)
3
RAO BAHADHUR Y MAHABHALESHWARPPA ENGINEERING COLLEGE
(Formerly Vijayanagar Engineering College, Bellary)
(font size 13 bold)
CANTONMENT, BELLARY-583 104 (KARNATAKA).
(font size 12 bold)
CERTIFICATE
4
CONTENTS
Chapter Page
No. No.
ACKNOWLEDGEMENT
ABSTRACT i
CONTENTS
LIST OF TABLES
LIST OF FIGURES
1 INTRODUCTION 1-
2 REVIEW OF ……………..
2.1 INTRODUCTION
2.2
2.3
2.3.1
……. 2.3.1.1
……. 2.3.1.2
2.4 …….
……. …….
……. …….
……. …….
……. …….
5/6/ 7/8 CONCLUSIONS
REFERENCES
LIST OF TABLES
6
CHAPTER-3
(font size 16)
TITLE OF CHAPTER
(font size 18)
…………………………………………….
…………………………………………….
…………………………………………….
…………………………………………….
…………………………………………….
…………………………………………….
…………………………………………….
…………………………………………….
…………………………………………….
7
8
Department of Mechanical Engineering, RYMEC, Bellary
9
10