Professional Documents
Culture Documents
Package Contents
Overview
Thank you for purchasing the AirWire Plug n' Play Wireless 10/100
Ethernet Cable. AirWire includes everything you need to connect a
wired Ethernet device to your Internet connection wirelessly.
Airwire has 6 LEDs on the front of the unit to indicate power,
Ethernet, and wireless connection strength. The LEDs are only
visible when the unit is properly connected to a power source.
This Quick Start Guide will guide you through the steps to connect
your devices. For your reference, an example diagram can be
found on page 6 of this guide.
1
AirWire Plug N' Play Wireless 10/100 Ethernet Cable
Product Overview
Front Panel
Power LED The first LED is the Power LED which indicates the
power adapter is connected properly.
Ethernet LED The second LED indicates that the black Ethernet
connector on the power adapter is connected properly to a device.
Wireless Signal LEDs (3-6) Indicates the wireless signal strength
between the AirWire connections.
2
Product Overview
Rear Panel
Ethernet Port
3
AirWire Plug N' Play Wireless 10/100 Ethernet Cable
Hardware Installation
To connect the AirWire kit, perform the following steps:
1. Connect the power adapter to a power outlet.
4
Hardware Installation
5
AirWire Plug N' Play Wireless 10/100 Ethernet Cable
6
Declaration of Conformity
Declaration of Conformity
Česky UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI
[Czech] NETWORKS device, je ve shod se základními po adavky a dal ími p
íslu n mi ustanoveními sm rnice 1999/5/ES.
7
AirWire Plug N' Play Wireless 10/100 Ethernet Cable
RR081610
8
Ubiquiti Networks Support
Email: support@ubnt.com
Phone (9 a.m. - 5 p.m. PST): 408-942-1153
Skype: Ubiquiti_Support
Online Resources
Wiki Page: www.ubnt.com/wiki
Support Forum: www.ubnt.com/forum
Knowledge Base: www.ubnt.com/kb
Downloads: www.ubnt.com/support/downloads
www.ubnt.com
© 2010 Ubiquiti Networks, Inc. All rights reserved.