Professional Documents
Culture Documents
Chemical Process
ANSI: Mark 3, Mark 3 Group 4, Guardian,
PolyChem S and M, GRP Ring Section
Two Stage Radially Split
ISO: CPS, CPXS, CPXM, WXH, WXL, WX, CS, WDX,
PolyChem S and M • Single and Double Suction First Stage F, NM
• Flows to 4500 m3/h (20 000 gpm) HED, HED-DS, DSTHF, TSHO • Flows to 1150 m3/h (5100 gpm)
• Heads to 300 m (1000 ft) • Heads to 2750 m (9000 ft)
• Flows to 1000 m3/h (4400 gpm)
• Temperatures to 350°C (660°F) • Temperatures to 200°C (400°F)
• Heads to 600 m (2000 ft)
• Pressures to 25 bar (365 psi) • Pressures to 300 bar (4500 psi)
• Temperatures to 450°C (850°F)
• Pressures to 80 bar (1160 psi)
• O I L & G A S • H Y D R O C A R B O N P R O C E S S I N G • P O W E R G E N E R A T I O N • C H E M I C A L P R O C E S S I N G • W A T E R R E S O U R C E S • G E N E R A L I N D U S T R Y •
Solids Handling
MF, MN, Primo-Titan
• Flows to 45 000 m3/h (200 000 gpm) Rotary - Gear
Vertical • Heads to 90 m (300 ft) GEAREX, HYDREX, GR, GAX
Double Casing • Sizes 80 mm (3 in) to 1800 mm (72 in) • Flows to 270 m3/h (1200 gpm)
• Temperatures from -50°C (-60°F)
• Process to 340°C (650°F)
• Power • Pressures to 34 bar (500 psi)
• Cryogenic
• Desalination
VPC, VTP-CAN, QLC, QLQC, WUC,
APKC, APKD Submersible Heritage Names of Distinction
• Flows to 14 000 m3/h (60 000 gpm) • Water Filled Motor
• Heads to 1050 m (3500 ft) • Oil Filled Motor ACEC ™ Centrifugal Pumps
• Temperatures from -200°C (-330°F)
to 300°C (570°F) SUBM Aldrich ® Pumps
• Pressures to 150 bar (2160 psi) • Flows to 4500 m3/h (20 000 gpm) Byron Jackson ® Pumps
• Heads to 800 m (2600 ft)
• Motor sizes to 5000 kW (6700 hp) Cameron ® Pumps
Durco ® Pumps
Special Purpose Equipment Flowserve ® Pumps
and Systems
• Unspared process barrel pumps IDP ® Pumps
• Hydraulic power recovery turbines
• Reactor recycle systems
Jeumont-Schneider ™ Pumps
Wet Pit Solids Handling • Hydraulic decoking systems Niigata Worthington Pumps
MVX • Plunger pumps
• Flows to 17 000 m3/h (75 000 gpm) • Cryogenic expanders Pacific ® Pumps
• Heads to 40 m (130 ft)
Standard Sump • Sizes 250 mm (10 in) to Pleuger ® Pumps
1200 mm (48 in)
ESP2 Scienco ® Pumps
• Flows to 900 m3/h (4000 gpm)
• Heads to 100 m (325 ft) Sier-Bath ® Rotary Pumps
• Temperatures from -75°C (-100°F)
to 175°C (350°F) TKL™ Pumps
• Pressures to 12 bar (175 psi)
United ® Centrifugal Pumps
VGRP
• Flows to 325 m3/h (1400 gpm) Western Land Roller ® Irrigation Pumps
• Heads to 100 m (325 ft)
• Temperatures from -20°C (-30°F)
Wilson-Snyder ® Pumps
Submersible Motor
to 80°C (180°F)
MSX Worthington ® Pumps
• Pressures to 12 bar (175 psi)
• Flows to 4500 m3/h (20 000 gpm)
• Heads to 90 m (300 ft)
Worthington Simpson ® Pumps
• Sizes 80 mm (3 in) to 500 mm (20 in)
Heavy-Duty Sump • Motors to 225 kW (300 hp) Flowserve offers the world's most complete line of pumps for
RJ, MJ, LC-S, FRBHJ, ECPJ Process, Chemical, Power, Water and General Industrial applications.
• Flows to 1020 m3/h (4500 gpm)
Pesticide and Insecticide Only a representative sample of these pumps are shown.
• Heads to 60 m (200 ft)
• Temperatures to 110°C (225°F) Closed Chemical Transfer
• Pressures to 10 bar (150 psi) • AP-30 USA and Canada Latin America
• DD6 Flowserve Corporation Flowserve Corporation
• MDX/MDXN 5215 North O’Connor Blvd. Boulevard del Cafetal
Suite 2300 Edificio Ninina, Local 7
• MTX Irving, Texas 75039-5421 USA El Cafetal - Caracas
• PH6 Pump Division Telephone: 1 937 890 5839 Venezuela 1061
• STX Telephone: 58 212 985 3092
Europe, Middle East, Africa Telefax: 58 212 985 1007
Flowserve Corporation
Gebouw Hagepoint Asia Pacific
Westbroek 39-51 Flowserve Pte. Ltd.
4822 ZX Breda 10 Tuas Loop
Netherlands Singapore 637345
FPD-1002a Telephone: 31 76 502 8920 Telephone: 65 6771 0600
Printed in U.S.A. Telefax: 65 6779 4607
August 2009
© Flowserve Corporation