Equations for the Design of Standard Sprocket Teeth
This spreadsheet will generate the calculations needed to create an approximation of a sproocket tooth profile. Refer to the GEARS-IDS lesson Designing Drawing a Sprocket.
P (Chain Pitch) 50.80
N (Number of Teeth) 12 Dr (Roller Diameter) 28.58 PD 196.2761 Ds 28.7259 <B R 14.3630 A 40.0000 B 13.3333 ac 22.8640 M 17.5148 T 14.6967 E 37.2270 xy 8.6436 yz 2.8183 ab 40.0120 W 38.6486 V 10.3559 F 24.2061 H 19.2983 S 29.5293 t Teeth
Note: Depending on pitch, very low values will yield erroneous results (example any value less than 8 for a 25P sprocket yields erroneous results.