Professional Documents
Culture Documents
Catalogodp Pumps
Catalogodp Pumps
dp pumps
technical data
Model identification 1
Features 2
Applications 3
Material specification 4
Pump connections 5
INDEX shaft seal 6
Motor specifications 7
50
20 m3/h
DPVS F 45 - 50 -1
Basic materials DPV DP Vertical pumps in AISI 304 (1.4301)
Pump connections Oval counterflanges with female thread (DPLHS round flanges)
V Victaulic connection
-1 One stage with half head impeller (only available on DPV 45)
dp pumps www.dp-pumps.com
1
dp pumps is an
ISO-9001
and ISO-14001
certified company.
Construction with
minimized number
Stainless steel
pumpshaft
Flat faces on shaft
for strong
shaft/ impeller
construction.
Sleeve sealing
Sleeve construction Stainless steel
ensures total diffuser
compensation of Special design
thermal expansion. reduces internal
Special shaped o- losses which impro-
ring grooves for ves the efficiency of
optimal sealing. the pump.
Pump bearings
Shaft bearing
through combination
of tungsten carbide
bearing on shaft and
ceramic bearing in
diffuser.
Tie rods
Made of stainless
steel for maximum
resistance against Suction discharge
corrosion caused by casing
enviromental Separate baseplate
influences. enables special cor-
Free floating rosion resistance
sliding flange treatments. Entire
Connection rotates housing made of
to match flange and stainless steel.
bolt orientation.
Easy connection for
misalignments.
Victaulic connection
available on selec-
2 ted series.
APPLICATIONS
- Boostersets
- Boiler feed
- Water treatment
- Irrigation
- Sprinkler installation
- Carwash
- Firefighting
- Marine applications
- Chemical industry
- Processing industry
dp pumps www.dp-pumps.com 3
MATERIAL SPECIFICATION
Construction:
• Vertical multistage centrifugal pump.
• Durable and high efficienty hydraulic design.
• In-line suction and discharge connections.
• Expansion free radial sleeve sealing.
• Mechanical shaft seal.
• All wetted parts are produced of stainless steel.
Material specification
Complete hydralic
assembly (suction and
AISI 303 (1.4305) AISI 316 (1.4401)
discharge casing,
AISI 304 (1.4301) AISI 316L (1.4404)
impeller, diffuser, shaft,
sleeve and topplate)
Liquid lubricated
ceramic/tungsten-carbide
bearings
Dearating
brass AISI 316 (1.4401)
and drain plug
Duty range
Max. ambient
50
temperature [oC]
4
PUMP CONNECTIONS
connections oval sliding flange round sliding flange victaulic connection round casted flange
DIN EN 1092-2 PN25
G NEN ISO 228 DIN EN 1092-2 PN40
Norm ANSI B 16.1 cl.250 -
Rc NEN EN 10226 ANSI B 16.5 cl. 600
JIS B2238 16K
oval counter flange
Counter connection included optional
(female thread)
DPV 2 G1 DN25 32 mm -
DPV 4 G 1¼ DN32 32 mm -
DPV 10 G 1½ DN40 50 mm -
DPV 14 G 1¼ - 50 mm -
DPV 24 - DN 65 - -
DPV 18 G2 DN50 50 mm -
DPV 32 - DN 65 - -
DPV 45 - DN 80 - -
DPV 65 - DN 100 - -
DPLHS 6 - - - DN40
dp pumps www.dp-pumps.com 5
SHAFT SEAL
Shaft Seal
Secondary sealings
Viton®
DPVS and DPLHS
Options
6
MOTOR SPECIFICATIONS
Motor specifications:
• Specially developed three-phase improved efficiency motors according IEC standard.
• Nominal power supply [V] : 380 and 420
• Frequency [Hz] : 50
• Nominal rotation speed [min ]
-1
: 1425 and 2850
• Protection class : IP55
• Insulation class :F
• Efficiency class : eff2
dp pumps www.dp-pumps.com 7
DPV 2
8
DPV 2
Performance curve
according to:
DIN 2548 Class C
50 Hz 2850 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 9
DPV 4
10
DPV 4
Performance curve
according to:
DIN 2548 Class C
50 Hz 2850 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 11
DPV 10
12
DPV 10
Performance curve
according to:
DIN 2548 Class C
50 Hz 2850 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 13
DPV 14
14
DPV 14
Performance curve
according to:
DIN 2548 Class C
50 Hz 1425 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 15
DPV 18
16
DPV 18
Performance curve
according to:
DIN 2548 Class C
50 Hz 2850 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 17
DPVF 24
18
DPVF 24
Performance curve
according to:
DIN 2548 Class C
50 Hz 1425 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 19
DPVF 32
20
DPVF 32
Performance curve
according to:
DIN 2548 Class C
50 Hz 2850 min-1
H (m)
1m = 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 21
DPVF 45
22
DPVF 45
Performance curve
according to:
DIN 2548 Class C
50 Hz 2850 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 23
DPVF 65
24
DPVF 65
Performance curve
according to:
DIN 2548 Class C
50 Hz 2850 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 25
DPLHS 6
26
DPLHS 6
Performance curve
according to:
DIN 2548 Class C
50 Hz 2850 min-1
H (m)
1m= 1,42 Psi
3,28 feet
9,806 kPa
0,098 Bar
Q (l/s)
1 l/s = 15,85 US.Gpm
13,20 Imp.Gpm
60 l/min
dp pumps www.dp-pumps.com 27
NOTES
28
NOTES
dp pumps www.dp-pumps.com 29
dp pumps
dp pumps
P.O. Box 28
2400 AA Alphen aan den Rijn
The Netherlands
t +31 172 48 83 25
f +31 172 46 89 30
dp@dp-pumps.com
www.dp-pumps.com