Professional Documents
Culture Documents
• Communication equipment
Not to scale
Typical Application
VOU T
VAC
GND
STR-W6000S
FB/OLP
S/ OCP
D/ST
GND
V CC
BR
1 3 4 5 6 7
Brown-In/Brown-Out function
disabled by connecting BR
terminal to GND.
STR-W605xS-DS
Selection Guide
* The listed output power is based on the package thermal ratings, and the peak output power can be 120% to 140% of the
value stated here. At low output voltage and short duty cycle, the output power may be less than the value stated here.
VCC D/ST
4 Startup 1
BR Brown-In/
7 Brown-Out
DRV
PWM OSC SQ
R
OCP
VCC OLP
Drain Peak Current
Compe nsa tion
FB/OLP Fe edback
LEB 3
6 Control
S/OCP
Slope GND
5
Compensation
http://www.DataSheet4U.net/
Pin-out Diagram
1 2 3 4 5 6 7
60
1 ms
1
40
20
0.1
0
0 20 40 60 80 100 120
To use this graph, apply the S.O.A
Internal Frame Temperature, TF (°C) temperature derating coefficient
taken from the graph at the left
0.01
1 10 100 1000
Drain-to-Source Voltage, VDS (V)
MOSFET Avalanche Energy Derating Coefficient Curve MOSFET Temperature versus Power Dissipation Curve
100 25
Allowable Power Dissipation, PD1 (W)
Temperature Derating Coefficient (%)
http://www.DataSheet4U.net/
60 15
EAS
40 10
20 5
Without heatsink
PD1 = 1.3 W at TA ≤ 25°C
0 0
25 50 75 100 125 150 0 20 40 60 80 100 120 140 160
Channel Temperature, Tch (°C) Ambient Temperature, TA (°C)
0.1
0.01
10-6 10-5 10-4 10-3 10-2 10-1
Time (s)
by on-resistance
10 0.1 ms
80
60 1 ms
1
40
20
0.1
0
0 20 40 60 80 100 120
To use this graph, apply the S.O.A
Internal Frame Temperature, TF (°C) temperature derating coefficient
taken from the graph at the left
0.01
1 10 100 1000
Drain-to-Source Voltage, VDS (V)
MOSFET Avalanche Energy Derating Coefficient Curve MOSFET Temperature versus Power Dissipation Curve
100 25
Allowable Power Dissipation, PD1 (W)
Temperature Derating Coefficient (%)
http://www.DataSheet4U.net/
60 15
EAS
40 10
20 5
Without heatsink
PD1 = 1.3 W at TA ≤ 25°C
0 0
25 50 75 100 125 150 0 20 40 60 80 100 120 140 160
Channel Temperature, Tch (°C) Ambient Temperature, TA (°C)
0.1
0.01
10-6 10-5 10-4 10-3 10-2 10-1
Time (s)
by on-resistance 0.1 ms
10
80
60 1 ms
1
40
20
0.1
0
0 20 40 60 80 100 120
To use this graph, apply the S.O.A
Internal Frame Temperature, TF (°C) temperature derating coefficient
taken from the graph at the left
0.01
1 10 100 1000
Drain-to-Source Voltage, VDS (V)
MOSFET Avalanche Energy Derating Coefficient Curve MOSFET Temperature versus Power Dissipation Curve
100 30
Allowable Power Dissipation, PD1 (W)
Temperature Derating Coefficient (%)
http://www.DataSheet4U.net/
20
60
EAS
15
40
10
20
5 Without heatsink
PD1 = 1.3 W at TA ≤ 25°C
0 0
25 50 75 100 125 150 0 20 40 60 80 100 120 140 160
Channel Temperature, Tch (°C) Ambient Temperature, TA (°C)
0.1
0.01
10-6 10-5 10-4 10-3 10-2 10-1
Time (s)
Typical Application
VOU T
VAC
GND
STR-W6000S
FB/OLP
S/ OCP
D/ST
GND
V CC
BR
1 3 4 5 6 7
Brown-In/Brown-Out function
enabled by connecting BR
terminal to resistive divider.
http://www.DataSheet4U.net/
10.0±0.2
4.2±0.2
Gate burr
2.8±0.2
0.5
4±0.2
7.9±0.2
φ3.2±0.2
16.9±0.3
STR
a
b
2.6±0.1
Dimensions from root
2.8
6-0.74±0.15
5.0±0.5
6-0.65 +0.2
10.4±0.5
R-end
-0.1
(2
-R1
(5.4)
http://www.DataSheet4U.net/
0.45 +0.2
-0.1
6×P1.27±0.15=7.62±0.15
Dimensions between roots 5.08±0.6
Dimensions between roots
Packing Specifications
8.9
+0.3
9.5–0.1
35.0
(15.4)
Side marked
2.85 “ANTISTATIC”
(3.6) +0.3
1.3 –0.2
14.3
http://www.DataSheet4U.net/
Spacer
620
Carton
(side
view) Tube
Tube
125
Spacer 185
Carton dimensions (mm)
Capacity:
36 tubes per carton (3 rows, 12 tubes per row)
50 pieces per tube
1800 pieces maximum per carton
time, resulting in reduced heat radiation effect. Silicone grease solder bath must be grounded in other to prevent leak voltages
with low consistency (hard grease) may cause cracks in the mold generated by them from being applied to the products.
resin when screwing the product to a heatsink. • The products should always be stored and transported in Sanken
• Our recommended silicone greases for heat radiation purposes, shipping containers or conductive containers, or be wrapped in
which will not cause any adverse effect on the product life, are aluminum foil.
indicated below:
Type Suppliers
G746 Shin-Etsu Chemical Co., Ltd.
YG6260 Momentive Performance Materials Holding, Inc.
SC102 Dow Corning Toray Co., Ltd.